The last two decades have seen a steady and impressive development, and eventual industrial acceptance, of the high energy-rate manufact turing techniques based on the utilisation of energy available in an explo sive charge. Not only has it become economically viable to fabricate complex shapes and integrally bonded composites-which otherwise might not have been obtainable easily, if at all-but also a source of reasonably cheap energy and uniquely simple techniques, that often dispense with heavy equipment, have been made available to the engineer and applied scientist. The consolidation of theoretical knowledge and practical experience which we have witnessed in this area of activity in the last few years, combined with the growing industrial interest in the explosive forming, welding and compacting processes, makes it possible and also opportune to present, at this stage, an in-depth review of the state of the art. This book is a compendium of monographic contributions, each one of which represents a particular theoretical or industrial facet of the explosive operations. The contributions come from a number of practising engineers and scientists who seek to establish the present state of knowledge in the areas of the formation and propagation of shock and stress waves in metals, their metallurgical effects, and the methods of experimental assessment of these phenomena.

The papers included in this book were presented at the International Conference “New Technologies, Development and Application,” which was held at the Academy of Sciences and Arts of Bosnia and Herzegovina in Sarajevo, Bosnia and Herzegovina on 28th–30th June 2018. The book covers a wide range of technologies and technical disciplines including complex systems such as: Robotics, Mechatronics Systems, Automation, Manufacturing, Cyber-Physical Systems, Autonomous Systems, Sensors, Networks, Control Systems, Energy Systems, Automotive Systems, Biological Systems, Vehicular Networking and Connected Vehicles, Effectiveness and Logistics Systems, Smart Grids, Nonlinear Systems, Power Systems, Social Systems, and Economic Systems.

Descripción del editor: "heet forming fundamentals are thoroughly addressed in this comprehensive reference for the practical and efficient use of sheet forming technologies. The principle variables of sheet forming-including the interactions between variables-are clearly explained, as a basic foundation for the most effective use of computer aided modeling in process and die design.Topics include stress analysis, formability criteria, tooling, and materials for sheet forming. The book also covers the latest developments in sheet metal forming technology, including servo-drive presses and their applications, and advanced cushion systems in mechanical and hydraulic presses." (ASM International).

Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Describes basic mechanics of the process, practices of those in the field, metal combinations and configurations that have been bonded, and applications.

This reference explores explosion welding, a high intensity, transient impact that achieves metal compounds not obtainable otherwise. Electron microscopy images cover the structure of numerous welded joints including titanium–orthorhombic titanium aluminide, copper–tantalum, aluminum–tantalum, iron–silver, steel–steel, and copper–titanium. These weldable pairs have different solubility than their initial elements. The authors present various processes and structures including granulating fragmentation, cusps, splashes, and quasi-wave interface. Specific risk zones for chemical and petrochemical (coke chamber) reactors are probed and suggestions offered. Key Features: Offers new theories about explosion welding processes and structures Investigates dozens of weldable pairs with differing solubility from initial elements Studies both hetero- and homogeneous pairs Explores welded joints with flat, wavy and quasi-wavy separation boundaries Observes irregularities of the separation surface relief observing asperities and splashes and their transformation under intensified welding modes Unveils a new type of fragmentation under explosion welding Explosive Welding: Processes and Structures is a valuable resource for a wide range of experts involved in explosion welding, engineers, as well as graduate and postgraduate students.

This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.

Rock Blasting and Explosives Engineering covers the practical engineering aspects of many different kinds of rock blasting. It includes a thorough analysis of the cost of the entire process of tunneling by drilling and blasting in comparison with full-face boring. Also covered are the fundamental sciences of rock mass and material strength, the thermal decomposition, burning, shock initiation, and detonation behavior of commercial and military explosives, and systems for charging explosives into drillholes. Functional descriptions of all current detonators and initiation systems are provided. The book includes chapters on flyrock, toxic fumes, the safety of explosives, and even explosives applied in metal working as a fine art. Fundamental in its approach, the text is based on the practical industrial experience of its authors. It is supported by an abundance of tables, diagrams, and figures. This combined textbook and handbook provides students, practitioners, and researchers in mining, mechanical, building construction, geological, and petroleum engineering with a source from which to gain a thorough understanding of the constructive use of explosives.