Chlorine is one of the most important basic chemicals, which is used directly or indirectly in the production of around 60 % of all chemical products. The production is almost exclusively based on energy intensive electrolysis processes, with an average of 2.5 – 3.5 MWh of electrical energy required per ton of chlorine generated. This means that chlorine production alone accounts for around 3 % of the electrical energy used worldwide in industry. By using oxygen depolarized cathodes (ODC), it is possible to reduce the demand for electrical energy on an industrial scale by about 25 %. Instead of hydrogen evolution, oxygen reduction takes place. Due to the low solubility of oxygen, the electrode is designed as a gas-diffusion electrodes (GDE). These are porous silver-based electrodes with hydrophobic regions due to the use of polytetrafluoroethylene (PTFE). During operation, the liquid electrolyte penetrates the pore structure, but the PTFE prevents complete flooding of the electrode. Oxygen is supplied via a gas compartment and enters the internal structure of the electrode. A three-phase interface is formed, consisting of liquid electrolyte, gas and catalytically active solid, at which the electrochemical reaction takes place. Although the technology is already successfully used industrially, many processes, especially the electrolyte distribution, inside the GDE remain unknown. In this dissertation, the influence of PTFE is first systematically investigated. Subsequently the process is described in a pseudo-2D model supported by operando experiments. Finally, the exact penetration depth of the electrolyte is analyzed using specially designed electrodes.

In the quest to mitigate the buildup of greenhouse gases in Earth's atmosphere, researchers and policymakers have increasingly turned their attention to techniques for capturing greenhouse gases such as carbon dioxide and methane, either from the locations where they are emitted or directly from the atmosphere. Once captured, these gases can be stored or put to use. While both carbon storage and carbon utilization have costs, utilization offers the opportunity to recover some of the cost and even generate economic value. While current carbon utilization projects operate at a relatively small scale, some estimates suggest the market for waste carbon-derived products could grow to hundreds of billions of dollars within a few decades, utilizing several thousand teragrams of waste carbon gases per year. Gaseous Carbon Waste Streams Utilization: Status and Research Needs assesses research and development needs relevant to understanding and improving the commercial viability of waste carbon utilization technologies and defines a research agenda to address key challenges. The report is intended to help inform decision making surrounding the development and deployment of waste carbon utilization technologies under a variety of circumstances, whether motivated by a goal to improve processes for making carbon-based products, to generate revenue, or to achieve environmental goals.

Praise for Introductory Raman Spectroscopy - Highlights basic theory, which is treated in an introductory fashion - Presents state-of-the-art instrumentation - Discusses new applications of Raman spectroscopy in industry and research

As the subtitle indicates, the overriding intention of the authors has been to provide a practical guide to the design of electrolytic plant. We wanted to show that the procedures for the design and optimization of such a plant are essentially simple and can be performed by readers comparatively new to the electrochemical field. It was important to realize that electrochemical engineering should not be confused with applied electrochemistry but had to be based on the principles of chemical engineering. For this reason, reference is often made to standard chemical engineering texts. Since this is a practical guide rather than a textbook, we have included a large number of worked examples on the principle that a good worked example is worth many paragraphs of text. In some examples we have quoted costs, e.g., of chemicals, plant or services. These costs are merely illustrative; current values will have to be obtained from manufacturers or journals. If this is not possible, approximate methods are available for updating costs to present-day values (see Refs. 1 and 3, Chapter 6).

This text offers an open-learning approach to Raman spectroscopy providing detail on instrumentation, applications and discussions questions throughout the book. It provides a valuable guide to assist with teaching Raman spectroscopy which is gaining attention in (analytical) chemistry, and as a consequence, teaching programs have followed. Today, education in Raman spectroscopy is often limited to theoretical aspects (e.g. selection rules), but practical aspects are usually disregarded. With these course notes, the author hopes to fill this gap and include information about Raman instrumentation and how it is interpreted. Provides a user-friendly text that tackles the theoretical background, and offers everyday tips for common practice Raman instrumentation and practical aspects, which are sometimes overlooked, are covered Appropriate for students, and includes summaries, text boxes, illustrating the ideas with examples from research literature or providing background information or links with other courses Written with an open-learning approach, this book will be ideal for use as a self-study guide or as the basis of a taught course with discussion and self-assessment questions throughout the text Includes a comprehensive bibliography to guide the reader to more specialized texts and sources.