Corrosion of reinforced concrete structures has been a significant problem for many state and transportation agencies since the application of deicing salts was introduced. Much research has been conducted to develop corrosion protection systems that can prolong the life span of reinforced concrete structures. The Colorado Department of Transportation (CDOT) has several routine and experimental measures to prevent corrosion of the rebar including epoxy-coated rebar, calcium nitrite admixture, organic corrosion inhibitors, a thick cover of quality concrete, and a waterproofing membrane covered by an asphalt overlay. An extensive literature review was performed to collect information on various corrosion protection systems that have been used in the U.S. and around the world. Current CDOT practices in terms of corrosion protection measures were reviewed. A draft inspection plan for Colorado's bridge structures was proposed.

This book provides a guide to movement and restraint in bridges for bridge engineers and will enable them to draw up design calculations and specifications for effective installation, and satisfactory service and durability of bearings and joints. It has been fully revised and updated in line with current codes and design practice, modern developme

This synthesis will be of interest to bridge designers, maintenance engineers, and others concerned with designing and maintaining bridge deck joints. Information is presented on the types of deck joints used in bridges and on the design of bridges without joints. Bridges are continually moving and thus need either some type of deck joint or an integral design to accommodate this movement. This report of the Transportation Research Board describes the types of deck joints being used, the problems with these joints, and how integral construction-- bridge decks without joints--can be used to avoid joints.

Participating states -- Bridge deck joint ratings -- Expansion joint devices (illustrations) -- States reports.

TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 319: Bridge Deck Joint Performance presents the state of the practice on commonly used expansion joint systems in bridges by summarizing performance data for each system type and by providing examples of selection criteria and design guidelines.

A Wabocrete FMV bridge deck expansion joint system was installed on the Alternate Rte. 58 bridge over the Clinch River in November 1986. The bridge was placed in service in mid-1987. The report concerns an installation and performance evaluation of the joint system. It was found that the Wabocrete FMV joint system offers some installation advantages over preformed joint systems. The blockout area of the bridge deck does not have to be as smooth or as precisely dimensioned since the joint's anchorage system can be leveled prior to placement of the bonding material. Installation and future maintenance problems involving anchor bolts are eliminated since the system relies on bond rather than mechanical anchorages. After over two years of service, the Vabocrete system has performed well. During this period, the joint has accommodated all thermal and structural movements, withstood traffic impacts and remained leak proof. The joint does tend to accumulate debris and should be routinely cleaned. The performance of the joint during the period of the study has not given any reason to suggest that it not be used on new bridge decks similar to the one studied. A longer term evaluation, however, would be necessary for a fullrecommendation. The use of the Wabocrete FMV, and similar systems, as retrofit on older bridges should be approached with caution. Furthermore, these systems shouldprobably not be used in retrofit situations in conjunction with adjacent asphaltic overlays.

The book focuses on the use of inelastic analysis methods for the seismic assessment and design of bridges, for which the work carried out so far, albeit interesting and useful, is nevertheless clearly less than that for buildings. Although some valuable literature on the subject is currently available, the most advanced inelastic analysis methods that emerged during the last decade are currently found only in the specialised research-oriented literature, such as technical journals and conference proceedings. Hence the key objective of this book is two-fold, first to present all important methods belonging to the aforementioned category in a uniform and sufficient for their understanding and implementation length, and to provide also a critical perspective on them by including selected case-studies wherein more than one methods are applied to a specific bridge and by offering some critical comments on the limitations of the individual methods and on their relative efficiency. The book should be a valuable tool for both researchers and practicing engineers dealing with seismic design and assessment of bridges, by both making the methods and the analytical tools available for their implementation, and by assisting them to select the method that best suits the individual bridge projects that each engineer and/or researcher faces.