This accessible, new reference work shows how and why RF energy iscreated within a printed circuit board and the manner in whichpropagation occurs. With lucid explanations, this book enablesengineers to grasp both the fundamentals of EMC theory and signalintegrity and the mitigation process needed to prevent an EMCevent. Author Montrose also shows the relationship between time andfrequency domains to help you meet mandatory compliancerequirements placed on printed circuit boards. Using real-world examples the book features: Clear discussions, without complex mathematical analysis, offlux minimization concepts Extensive analysis of capacitor usage for variousapplications Detailed examination of components characteristics with variousgrounding methodologies, including implementation techniques An in-depth study of transmission line theory A careful look at signal integrity, crosstalk, andtermination

Tim Williams has worked for a variety of companies as an electronic design engineer over the last 20 years. He has monitored the progress of the EMC Directive and its associated standards since it was first made public. He is a member of the Institution of Electrical Engineers and now runs his own consultancy, specialising in EMC design and training.*Save money on consultancy bills with this book*Practical guide to implementing EMC within the product design process*The leading professional guide to the EMC Directive -100% up-to-date and reliable

A practical introduction to techniques for the design of electronic products from the Electromagnetic compatibility (EMC) perspective Introduces techniques for the design of electronic products from the EMC aspects Covers normalized EMC requirements and design principles to assure product compatibility Describes the main topics for the control of electromagnetic interferences and recommends design improvements to meet international standards requirements (FCC, EU EMC directive, Radio acts, etc.) Well organized in a logical sequence which starts from basic knowledge and continues through the various aspects required for compliance with EMC requirements Includes practical examples and case studies to illustrate design features and troubleshooting Author is the founder of the EMC design risk evaluation approach and this book presents many years’ experience in teaching and researching the topic

"Electromagnetic compatibility (EMC) is an engineering discipline often identified as "black magic." This belief exists because the fundamental mechanisms on how radio frequency (RF) energy is developed within a printed circuit board (PCB) is not well understood by practicing engineers. Rigorous mathematical analysis is not required to design a PCB. Using basic EMC theory and converting complex concepts into simple analogies helps engineers understand the mitigation process that deters EMC events from occurring. This user-friendly reference covers a broad spectrum of information never before published, and is as fluid and comprehensive as the first edition. The simplified approach to PCB design and layout is based on real-life experience, training, and knowledge. Printed Circuit Board Techniques for EMC Compliance, Second Edition will help prevent the emission or reception of unwanted RF energy generated by components and interconnects, thus achieving acceptable levels of EMC for electrical equipment. It prepares one for complying with stringent domestic and international regulatory requirements. Also, it teaches how to solve complex problems with a minimal amount of theory and math. Essential topics discussed include: * Introduction to EMC * Interconnects and I/O * PCB basics * Electrostatic discharge protection * Bypassing and decoupling * Backplanes-Ribbon Cables-Daughter Cards * Clock Circuits-Trace Routing-Terminations * Miscellaneous design techniques This rules-driven book-formatted for quick access and cross-reference-is ideal for electrical and EMC engineers, consultants, technicians, and PCB designers regardless of experience or educational background." Sponsored by: IEEE Electromagnetic Compatibility Society

Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

Circuits are faster and more tightly packed than ever, wireless technologies increase the electromagnetic (EM) noise environment, new materials entail entirely new immunity issues, and new standards govern the field of electromagnetic compatibility (EMC). Maintaining the practical and comprehensive approach of its predecessor, Principles and Techniques of Electromagnetic Compatibility, Second Edition reflects these emerging challenges and new technologies introduced throughout the decade since the first edition appeared. What's new in the Second Edition? Characterization and testing for high-speed design of clock frequencies up to and above 6 GHz Updates to the regulatory framework governing EM compliance Additional coverage of the printed circuit board (PCB) environment as well as additional numerical tools An entirely new section devoted to new applications, including signal integrity, wireless and broadband technologies, EMC safety, and statistical EMC Added coverage of new materials such as nanomaterials, band gap devices, and composites Along with new and updated content, this edition also includes additional worked examples that demonstrate how estimates can guide the early stages of design. The focus remains on building a sound foundation on the fundamental concepts and linking this to practical applications, rather than supplying application-specific fixes that do not easily generalize to other areas.

This book reviews developments in the following topics: electronic system design; EMC; shielding theory; protection technique; bonding; grounding; filter; ferrite; isolator; transient suppressor; cable; and connector.

This is a guide for the system designers and installers faced with the day-to-day issues of achieving EMC, and will be found valuable across a wide range of roles and sectors, including process control, manufacturing, medical, IT and building management. The EMC issues covered will also make this book essential reading for product manufacturers and suppliers - and highly relevant for managers as well as technical staff. The authors' approach is thoroughly practical - all areas of installation EMC are covered, with particular emphasis on cabling and earthing. Students on MSc and CPD programmes will also find in this book some valuable real-world antidotes to the academic treatises. The book is presented in two parts: the first is non-technical, and looks at the need for EMC in the context of systems and installations, with a chapter on the management aspects of EMC. The second part covers the technical aspects of EMC, looking at the various established methods which can be applied to ensure compatibility, and setting these in the context of the new responsibilities facing system builders. EMC for Systems and Installations is designed to complement Tim Williams' highly successful EMC for Product Designers. - Practical guide to EMC design issues for those involved in systems design and installation - Complementary title to Williams' bestselling EMC for Product Designers - Unique guidance for installers on EMC topics