Appropriate for undergraduate and beginning graduate level courses on embedded systems or microprocessor based systems design in computer engineering, electrical engineering, and computer science. The basic structure, operation, and design of embedded systems is presented in a stepwise fashion. A balanced treatment of both hardware and software is provided. The Intel 80C188EB microprocessor is used as the instructional example. Hardware is covered starting from the component level. Software development focuses on assembly language. The only background required is an introductory course in digital systems design.

This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. It gives a great introduction to FPGA-based microprocessor system design using state-of-the-art boards, tools, and microprocessors from Altera/Intel® and Xilinx®. HDL-based designs (soft-core), parameterized cores (Nios II and MicroBlaze), and ARM Cortex-A9 design are discussed, compared and explored using many hand-on designs projects. Custom IP for HDMI coder, Floating-point operations, and FFT bit-swap are developed, implemented, tested and speed-up is measured. Downloadable files include all design examples such as basic processor synthesizable code for Xilinx and Altera tools for PicoBlaze, MicroBlaze, Nios II and ARMv7 architectures in VHDL and Verilog code, as well as the custom IP projects. Each Chapter has a substantial number of short quiz questions, exercises, and challenging projects. Explains soft, parameterized, and hard core systems design tradeoffs; Demonstrates design of popular KCPSM6 8 Bit microprocessor step-by-step; Discusses the 32 Bit ARM Cortex-A9 and a basic processor is synthesized; Covers design flows for both FPGA Market leaders Nios II Altera/Intel and MicroBlaze Xilinx system; Describes Compiler-Compiler Tool development; Includes a substantial number of Homework’s and FPGA exercises and design projects in each chapter.

The less-experienced engineer will be able to apply Ball's advice to everyday projects and challenges immediately with amazing results. In this new edition, the author has expanded the section on debug to include avoiding common hardware, software and interrupt problems. Other new features include an expanded section on system integration and debug to address the capabilities of more recent emulators and debuggers, a section about combination microcontroller/PLD devices, and expanded information on industry standard embedded platforms. - Covers all 'species' of embedded system chips rather than specific hardware - Learn how to cope with 'real world' problems - Design embedded systems products that are reliable and work in real applications

System Design; Digital to Analog Converters; Sensors; Time-Based Measurements; Output Control Methods; Solenoids, Relays, and Other Analog Outputs; Motors; EMI; High Precision Applications; Standard Interfaces.

The Rabbit 3000 is a popular high-performance microprocessor specifically designed for embedded control, communications, and Ethernet connectivity. This new technical reference book will help designers get the most out of the Rabbit's powerful feature set. The first book on the market to focus exclusively on the Rabbit 3000, it provides detailed coverage of: Rabbit architecture and development environment, interfacing to the external world, networking, Rabbit assembly language, multitasking, debugging, Dynamic C and much more! Authors Kamal Hyder and Bob Perrin are embedded engineers with years of experience and they offer a wealth of design details and "insider" tips and techniques. Extensive embedded design examples are supported by fully tested source code. Whether you're already working with the Rabbit or considering it for a future design, this is one reference you can't be without! Let the experts teach you how to design embedded systems that efficiently hook up to the Internet using networked core modules Provides a number of projects and source code using RabbitCore, which will make it easy for the system designer and programmer to get hands-on experience developing networked devices

Debugging Embedded Microprocessor Systems provides techniques for engineers, technicians, and students who need to correct design faults in embedded systems. Using real-world scenarios, designers can learn practical, time-saving ways to avoid and repair potentially costly problems. Prevention is stressed. In this book, the author addresses hardware and software issues, including up-front design techniques to prevent bugs and contain design creep. Practical advice includes descriptions of common tools which can be used to help identify and repair bugs, as well as test routines. RTOS and embedded PC environments are also covered. Each chapter of Debugging Embedded Microprocessor Systems opens with an example design problem which illustrates real-world issues such as design changes, time pressures, equipment or component availability, etc. Case studies of past debugging projects are presented in the final chapter. - Addresses real-world issues like design changes, time pressures, equipment or component availability - Practical, time-saving methods for preventing and correcting design problems - Covers debugging tools and programmer test routines

In this practical guide, experienced embedded engineer Lewin Edwards demonstrates faster, lower-cost methods for developing high-end embedded systems. With today's tight schedules and lower budgets, embedded designers are under greater pressure to deliver prototypes and system designs faster and cheaper. Edwards demonstrates how the use of the right tools and operating systems can make seemingly impossible deadlines possible. Designer's Guide to Embedded Systems Development shares many advanced, in-the-trenches design secrets to help engineers achieve better performance on the job. In particular, it covers many of the newer design tools supported by the GPL (GNU Public License) system. Code examples are given to provide concrete illustrations of tasks described in the text. The general procedures are applicable to many possible projects based on any 16/32-bit microcontroller. The book covers choosing the right architecture and development hardware to fit the project; choosing an operating system and developing a toolchain; evaluating software licenses and how they affect a project; step-by-step building instructions for gcc, binutils, gdb and newlib for the ARM7 core used in the case study project; prototyping techniques using a custom printed circuit board; debugging tips; and portability considerations. A wealth of practical tips, tricks and techniques Design better, faster and more cost-effectively

Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded system design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed. C/C++ programming is applied, with a step-by-step approach which allows the novice to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues – intelligent instrumentation, networked systems, closed loop control, and digital signal processing. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology or technique introduced, and considers applications and the wider context. Numerous exercises and end of chapter questions are included. - A hands-on introduction to the field of embedded systems, with a focus on fast prototyping - Key embedded system concepts covered through simple and effective experimentation - Amazing breadth of coverage, from simple digital i/o, to advanced networking and control - Applies the most accessible tools available in the embedded world - Supported by mbed and book web sites, containing FAQs and all code examples - Deep insights into ARM technology, and aspects of microcontroller architecture - Instructor support available, including power point slides, and solutions to questions and exercises

Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.