In the present study, optimization of chromium powder mixed EDM parameters is studied during machining of H13 tool steel. Four input parameters of powder mixed EDM, namely peak current, pulse on time, duty cycle and powder concentration, are varied, each at three levels, to get the optimum responses. Material removal rate (MRR), Tool wear rate (TWR) and Surface Roughness (Ra) are considered as performance measures. Copper electrode of 16 mm is used as the tool. Response Surface Methodology is used to correlate input and output parameters. The variation of responses due to variation in input parameters has been studied and shown in the form of surface plots and contour plots.

This book comprises select proceedings of the International Conference on Futuristic Trends in Materials and Manufacturing (ICFTMM 2018). The book includes latest research on conventional materials, advanced metals and alloys, polymeric materials and composites. In addition to the characterization of different advanced materials, the book also discusses their applications in various fields such as marine, automotive, aerospace, sporting equipment, and infrastructure. The book offers an insight into the manufacturing of cost-effective and high performance materials products. The contents of this book will be useful for students, academicians, and researchers working in the field of materials science and engineering.

This book provides the knowledge and insight into the fundamental aspects of Electric Discharge Machining (EDM) processes and various hybrid machining technologies derived to improve the machining efficiencies. Fundamental theory of material removal, recent research trends and future research directions have been covered in each chapter. After explaining EDM, Dry and Near-dry EDM processes, Electrochemical Spark Machining, Arc Machining processes, Electric Discharge Hybrid-Turning processes, Electrical Discharge Grinding, Electric Discharge Milling, and various assisted EDM processes have been discussed. Finally, modeling and simulation of hybrid machining processes are also included. The book reflects the recent developments and trends in electric discharge hybrid machining processes. It covers in detail the basics of EDM, various hybrid and assistive technologies in EDM. It includes the updated discussion on the significance of process parameters in various hybrid EDM processes. An overview of modelling and simulation of hybrid EDM process is provided. This book is aimed at Graduate students, researchers in manufacturing engineering, production engineering, and materials engineering.

This book presents a collection of chapters on various aspects of futuristic composite materials, from manufacturing challenges to materials characterization. The book covers the scientific basis of processing and synthesizing futuristic composites, including the prerequisite theoretical background and latest fabrication techniques. The book also discusses industrial applications of composites, such as in aerospace, automotive, and sports equipment. This book will serve as a valuable guide for researchers and professionals working in the area of futuristic lightweight materials.

This Special Issue addresses the important issue of the energy efficiency of both manufacturing processes and systems. Manufacturing is responsible for one-third of global energy consumption and CO2 emissions. Thus, improving the energy efficiency of production has been the focus of research in recent years. Energy efficiency has begun to be considered as one of the key decision-making attributes for manufacturing. This book includes recent studies on methods for the measurement of energy efficiency, tools and techniques for the analysis and development of improvements with regards to energy consumption, modeling and simulation of energy efficiency, and the integration of green and lean manufacturing. This book presents a breadth of relevant information, material, and knowledge to support research, policy-making, practices, and experience transferability to address the issues of energy efficiency.

This book covers the International Conference on Engineering Research and Applications (ICERA 2021), which took place at Thai Nguyen University of Technology, Thai Nguyen, Vietnam on December 1–2, 2021, and provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micromechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the Proceedings of ICERA 2021, Advances in Engineering Research and Application, helps academics and professionals alike to reshape their thinking on sustainable development.

Materials science is the magic that allows us to change the chemical composition and microstructure of material to regulate its corrosion-mechanical, technological, and functional properties. Five major classes of stainless steels are widely used: ferritic, austenitic, martensitic, duplex, and precipitation hardening. Austenitic stainless steels are extensively used for service down to as low as the temperature of liquid helium (-269oC). This is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing. Steels with ferritic or martensitic structures show a sudden change from ductile (safe) to brittle (unsafe) fracture over a small temperature difference. Even the best of these steels shows this behavior at temperatures higher than -100oC and in many cases only just below zero. Various types of stainless steel are used across the whole temperature range from ambient to 1100oC. This book will be useful to scientists, engineers, masters, graduate students, and students. I hope readers will enjoy this book and that it will serve to create new materials with unique properties.

This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Provides production and mechanical engineers with the techniques of machining that have been developed to deal with new materials such as polymers, hard metals and ceramics, difficult to treat by conventional methods because of either hardness of components or the high accuracies of machining required. Annotation copyright Book News, Inc. Portland.

Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.