This book describes the design experience of automatic machines and the theoretical background for controlling them. Unlike the existing literature, it includes design concepts and their relationship with the dynamic behavior of automated devices, and links the dynamic response of the machine elements with the actuators that constitute an automatic machine. As such, it demonstrates that it is vital to properly model any automatic machine as a single system and find the final response to have a good design and control scheme. The introduction describes the background for designing automatic machines, their uniqueness in machine design, and the need to understand dynamic behavior. The following chapters provide the background for modeling multibody systems, examples of typical automatic machines, and the basis for determining the dynamic response of the most common actuators (motor, pneumatic, and hydraulic pistons and valves). The fourth chapter describes the dynamic response of the most common sensors utilized in automatic machines, while the fifth chapter includes the dynamic models of the machine elements that connect the actuators with the end effects (specific tools for each particular application). The final chapters contain examples of dynamic models for different automatic machines, including all the elements that affect the final response, and describe the simulation techniques (and their application to the examples) and the application of the transfer function for estimating the transient response of automatic machines.

Discrete-event dynamic systems (DEDs) permeate our world. They are of great importance in modern manufacturing processes, transportation and various forms of computer and communications networking. This book begins with the mathematical basics required for the study of DEDs and moves on to present various tools used in their modeling and control. Industrial examples illustrate the concepts and methods discussed, making this book an invaluable aid for students embarking on further courses in control, manufacturing engineering or computer studies.

This book addresses the core issues involved in the dynamic modeling, simulation and control of a selection of energy systems such as gas turbines, wind turbines, fuel cells and batteries. The principles of modeling and control could be applied to other non-convention methods of energy generation such as solar energy and wave energy. A central feature of Dynamic Modeling, Simulation and Control of Energy Generation is that it brings together diverse topics in thermodynamics, fluid mechanics, heat transfer, electro-chemistry, electrical networks and electrical machines and focuses on their applications in the field of energy generation, its control and regulation. This book will help the reader understand the methods of modelling energy systems for controller design application as well as gain a basic understanding of the processes involved in the design of control systems and regulators. It will also be a useful guide to simulation of the dynamics of energy systems and for implementing monitoring systems based on the estimation of internal system variables from measurements of observable system variables. Dynamic Modeling, Simulation and Control of Energy Generation will serve as a useful aid to designers of hybrid power generating systems involving advanced technology systems such as floating or offshore wind turbines and fuel cells. The book introduces case studies of the practical control laws for a variety of energy generation systems based on nonlinear dynamic models without relying on linearization. Also the book introduces the reader to the use nonlinear model based estimation techniques and their application to energy systems.

It is my ambition in writing this book to bring tribology to the study of control of machines with friction. Tribology, from the greek for study of rubbing, is the discipline that concerns itself with friction, wear and lubrication. Tribology spans a great range of disciplines, from surface physics to lubrication chemistry and engineering, and comprises investigators in diverse specialities. The English language tribology literature now grows at a rate of some 700 articles per year. But for all of this activity, in the three years that I have been concerned with the control of machines with friction, I have but once met a fellow controls engineer who was aware that the field existed, this including many who were concerned with friction. In this vein I must confess that, before undertaking these investigations, I too was unaware that an active discipline of friction existed. The experience stands out as a mark of the specialization of our time. Within tribology, experimental and theoretical understanding of friction in lubricated machines is well developed. The controls engineer's interest is in dynamics, which is not the central interest of the tribologist. The tribologist is more often concerned with wear, with respect to which there has been enormous progress - witness the many mechanisms which we buy today that are lubricated once only, and that at the factory. Though a secondary interest, frictional dynamics are note forgotten by tribology.

This textbook is ideal for an undergraduate course in Engineering System Dynamics and Controls. It is intended to provide the reader with a thorough understanding of the process of creating mathematical (and computer-based) models of physical systems. The material is restricted to lumped parameter models, which are those models in which time is the only independent variable. It assumes a basic knowledge of engineering mechanics and ordinary differential equations. The new edition has expanded topical coverage and many more new examples and exercises.

This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2008 conference. Robots are no longer confined to industrial manufacturing environments with a great deal of interest being invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for the dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics in meeting the needs of mankind in various sectors of the society. These include personal care, public health, and services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics specifically in mobile robotics, and their experience is reflected in the careful editing of the contents in the book.