Dynamic and Robust Streaming in and between Connected Consumer-Electronic Devices addresses a subject that is becoming more important over the years. On the one hand the arrival of home networks is imminent, and on the other hand we notice that chips integrate more and more functionality. The home network interconnects the Consumer Electronic (CE) devices in the home, and the individual CE-devices incorporate the chips to realize a ubiquitous streaming of video streams over this network. This book provides a comprehensive overview of the challenges that face us. The book shows that there are many similarities between traditional networking and networks in the chip. However, there are some different operational conditions that lead to original solutions. Dynamic and Robust Streaming in and between Connected Consumer-Electronic Devices focuses on the robustness aspects of the chosen technologies in the area of video streaming. Management of resources such as memory, bandwidth, CPU cycles, bus–cycles is an aspect that is prominent in many of the sections.

This book constitutes the refereed proceedings of the 9th IFIP/IEEE International Conference on Management of Multimedia and Mobile Networks and Services, MMNS 2006, held in Dublin, Ireland in October 2006 in the course of the 2nd International Week on Management of Networks and Services, Manweek 2006. The 18 revised full papers and six revised short papers presented were carefully reviewed and selected from 71 submissions.

This book provides a comprehensive overview of the state-of-the-art, data flow-based techniques for the analysis, modeling and mapping technologies of concurrent applications on multi-processors. The authors present a flow for designing embedded hard/firm real-time multiprocessor streaming applications, based on data flow formalisms, with a particular focus on wireless modem applications. Architectures are described for the design tools and run-time scheduling and resource management of such a platform.

This book constitutes the refereed proceedings of the 6th International Conference on Integration of AI and OR Techniques in Constraint Programming for Combinatorial Optimization Problems, CPAIOR 2009, held in Pittsburgh, PA, USA, in May 2009. The 20 revised full papers and 10 extended abstracts presented together with 2 invited talks were carefully reviewed and selected from 65 submissions. The papers describe current research in the fields of constraint programming, artificial intelligence, and operations research and present new techniques or new applications in combinatorial optimization, thus exploring ways of solving large-scale, practical optimization problems through integration and hybridization of the fields' different techniques.

Nowadays embedded and real-time systems contain complex software. The complexity of embedded systems is increasing, and the amount and variety of software in the embedded products are growing. This creates a big challenge for embedded and real-time software development processes and there is a need to develop separate metrics and benchmarks. “Embedded and Real Time System Development: A Software Engineering Perspective: Concepts, Methods and Principles” presents practical as well as conceptual knowledge of the latest tools, techniques and methodologies of embedded software engineering and real-time systems. Each chapter includes an in-depth investigation regarding the actual or potential role of software engineering tools in the context of the embedded system and real-time system. The book presents state-of-the art and future perspectives with industry experts, researchers, and academicians sharing ideas and experiences including surrounding frontier technologies, breakthroughs, innovative solutions and applications. The book is organized into four parts “Embedded Software Development Process”, “Design Patterns and Development Methodology”, “Modelling Framework” and “Performance Analysis, Power Management and Deployment” with altogether 12 chapters. The book is aiming at (i) undergraduate students and postgraduate students conducting research in the areas of embedded software engineering and real-time systems; (ii) researchers at universities and other institutions working in these fields; and (iii) practitioners in the R&D departments of embedded system. It can be used as an advanced reference for a course taught at the postgraduate level in embedded software engineering and real-time systems.

The 2010 Symposium on Component-Based Software Engineering (CBSE 2010) was the 13th in a series of successful events that have grown into the main forum for industrial and academic experts to discuss component technology. CBSE is concerned with the development of software-intensive systems from - dependently developed software-building blocks (components), the development of components, and system maintenance and improvement by means of com- nent replacement and customization. The aim of the conference is to promote a science and technology foundation for achieving predictable quality in software systems through the use of software component technology and its associated software engineering practices. In line with a broad interest, CBSE 2010 received 48 submissions. From these submissions, 14 were accepted after a careful peer-review process followed by an online program committee discussion. This resulted in an acceptance rate of 29%. The selected technical papers are published in this volume. For the fourth time, CBSE 2010 was held as part of the conference series: Fed- ated Events on Component-Based Software Engineering and Software Archit- ture (COMPARCH). The federated events were: the 13th International S- posium on Component-Based Software Engineering (CBSE 2010), the 6th - ternational Conference on the Quality of Software Architectures (QoSA 2010), andthe1stInternationalSymposium onArchitecting CriticalSystems(ISARCS 2010). Together with COMPARCH’s Industrial Experience Report Track and the co-located Workshop on Component-Oriented Programming (WCOP 2010), COMPARCH provided a broad spectrum of events related to components and architectures.

Handbook of Signal Processing Systems is organized in three parts. The first part motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; the second part discusses architectures for implementing these applications; the third part focuses on compilers and simulation tools, describes models of computation and their associated design tools and methodologies. This handbook is an essential tool for professionals in many fields and researchers of all levels.

Improving healthcare and staying healthy is one of the most discussed and important issues in our society. Technology has played and will play an important role in many aspects of the healthcare system, and it offers new and better ways to solve the key health problems of the new century. This book describes valued contributions of technology for improving hospital and home healthcare, and gives a perspective on how they will influence critical aspects of future medical care. It provides an overview and discussion of trends, presents the state-of-the-art of important research areas, and highlights recent breakthrough results in selected fields, giving an outlook on game-changing developments in the coming decades. The material is arranged in 6 parts and a total of 31 chapters. The healthcare areas addressed are: General advances and trends in healthcare technology, diagnostic imaging, integration of imaging and therapy, molecular medicine, medical information technology and personal healthcare.

This book is the outcome of a series of discussions at the Philips Symposium on Intelligent Algorithms, held in Eindhoven in December 2004. It offers exciting and practical examples of the use of intelligent algorithms in ambient and biomedical computing. It contains topics such as bioscience computing, database design, machine consciousness, scheduling, video summarization, audio classification, semantic reasoning, machine learning, tracking and localization, secure computing, and communication.

The implementation of networks-on-chip (NoC) technology in VLSI integration presents a variety of unique challenges. To deal with specific design solutions and research hurdles related to intra-chip data exchange, engineers are challenged to invoke a wide range of disciplines and specializations while maintaining a focused approach. Leading Researchers Present Cutting-Edge Designs Tools Networks-on-Chips: Theory and Practice facilitates this process, detailing the NoC paradigm and its benefits in separating IP design and functionality from chip communication requirements and interfacing. It starts with an analysis of 3-D NoC architectures and progresses to a discussion of NoC resource allocation, processor traffic modeling, and formal verification, with an examination of protocols at different layers of abstraction. An exploration of design methodologies, CAD tool development, and system testing, as well as communication protocol, the text highlights important emerging research issues, such as Resource Allocation for Quality of Service (QoS) on-chip communication Testing, verification, and network design methodologies Architectures for interconnection, real-time monitoring, and security requirements Networks-on-Chip Protocols Presents a flexible MPSoC platform to easily implement multimedia applications and evaluate future video encoding standards This useful guide tackles power and energy issues in NoC-based designs, addressing the power constraints that currently limit the embedding of more processing elements on a single chip. It covers traffic modeling and discusses the details of traffic generators. Using unique case studies and examples, it covers theoretical and practical issues, guiding readers through every phase of system design.