Sliding mode control is a simple and yet robust control technique, where the system states are made to confine to a selected subset. With the increasing use of computers and discrete-time samplers in controller implementation in the recent past, discrete-time systems and computer based control have become important topics. This monograph presents an output feedback sliding mode control philosophy which can be applied to almost all controllable and observable systems, while at the same time being simple enough as not to tax the computer too much. It is shown that the solution can be found in the synergy of the multirate output sampling concept and the concept of discrete-time sliding mode control.

The focus of this book is on the design of a specific control strategy using digital computers. This control strategy referred to as Sliding Mode Control (SMC), has its roots in (continuous-time) relay control. This book aims to explain recent investigations' output in the field of discrete-time sliding mode control (DSMC). The book starts by explaining a new robust LMI-based (state-feedback and observer-based output-feedback) DSMC including a new scheme for sparsely distributed control. It includes a novel event-driven control mechanism, called actuator-based event-driven scheme, using a synchronized-rate biofeedback system for heart rate regulation during cycle-ergometer. Key Features: Focuses on LMI-based SMC (sliding mode control) for uncertain discrete-time system using novel nonlinear components in the control law Makes reader understand the techniques of designing a discrete controller based on the flexible sliding functions Proposes new algorithms for sparsifying control and observer network through multi-objective optimization frameworks Discusses a framework for the design of SMC for two-dimensional systems along with analyzing the controllability of two-dimensional systems Discusses novel schemes for sparsifying the control network

"Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation" takes readers through the basic concepts, covering the most recent research in sliding mode control. The book is written from the perspective of practical engineering and examines numerous classical sliding mode controllers, including continuous time sliding mode control, discrete time sliding mode control, fuzzy sliding mode control, neural sliding mode control, backstepping sliding mode control, dynamic sliding mode control, sliding mode control based on observer, terminal sliding mode control, sliding mode control for robot manipulators, and sliding mode control for aircraft. This book is intended for engineers and researchers working in the field of control. Dr. Jinkun Liu works at Beijing University of Aeronautics and Astronautics and Dr. Xinhua Wang works at the National University of Singapore.

This book describes recent advances in the theory, properties, methods and applications of SMC, including a discussion about the advantages and disadvantages of different SMC algorithms.

This edited monograph provides a comprehensive and in-depth analysis of sliding mode control, focusing on event-triggered implementation. The technique allows to prefix the steady-state bounds of the system, and this is independent of any boundary disturbances. The idea of event-triggered SMC is developed for both single input / single output and multi-input / multi-output linear systems. Moreover, the reader learns how to apply this method to nonlinear systems. The book primarily addresses research experts in the field of sliding mode control, but the book may also be beneficial for graduate students.

AfterasurveypaperbyUtkininthelate1970s,slidingmodecontrolmeth- ologies emerged as an e?ective tool to tackle uncertainty and disturbances which are inevitable in most of the practical systems. Sliding mode control is a particular class of variable structure control which was introduced by Emel’yanov and his colleagues. The design paradigms of sliding mode c- trol has now become a mature design technique for the design of robust c- troller of uncertain system. In sliding mode technique, the state trajectory of the system is constrained on a chosen manifold (or within some neighb- hood thereof) by an appropriatecontrolaction. This manifold is also called a switching surface or a sliding surface. During sliding mode, system dynamics is governed by the chosen manifold which results in a well celebrated inva- ance property towards certain classes of disturbance and model mismatches. The purpose of this monograph is to give a di?erent dimension to sl- ing surface design to achieve high performance of the system. Design of the switching surface is vital because the closed loop dynamics is governed by the parameters of the sliding surface. Therefore sliding surface should be - signed to meet the closed loop speci?cations. Many systems demand high performance with robustness. To address this issue of achieving high perf- mance with robustness, we propose nonlinear surfaces for di?erent classes of systems. The nonlinear surface is designed such that it changes the system’s closed-loop damping ratio from its initial low value to a ?nal high value.

This book is devoted to control of finite and infinite dimensional processes with continuous-time and discrete time control, focusing on suppression problems and new methods of adaptation applicable for systems with sliding motions only. Special mathematical methods are needed for all the listed control tasks. These methods are addressed in the initial chapters, with coverage of the definition of the multidimensional sliding modes, the derivation of the differential equations of those motions, and the existence conditions. Subsequent chapters discusses various areas of further research. The book reflects the consensus view of the authors regarding the current status of SMC theory. It is addressed to a broad spectrum of engineers and theoreticians working in diverse areas of control theory and applications. It is well suited for use in graduate and postgraduate courses in such university programs as Electrical Engineering, Control of Nonlinear Systems, and Mechanical Engineering.

Nowadays, environmental issues motivates the replacement of mechanical, hydraulic and pneumatic system by electrical system in the transport sector aiming to reduce emissions generated by burning of fossil fuels in vehicles. The electrical system must ensure high electrical efficiency and should not exceed the weight of the substituted components. To attend these high performance requirements a fault-tolerant multiphase brushless DC machine was chosen for this research. The present work introduces a six-phase 600W brushless DC machine with 8 poles. The main challenge for the control issues of this machine is the mutual magnetic coupling between the phases due to the wave winding machine configuration. In this context, theoretical and practical investigations of different current control strategies based on the sliding mode control approach applied to the six-phase brushless DC machine are presented.

This book describes the advances and applications in Sliding mode control (SMC) which is widely used as a powerful method to tackle uncertain nonlinear systems. The book is organized into 21 chapters which have been organised by the editors to reflect the various themes of sliding mode control. The book provides the reader with a broad range of material from first principles up to the current state of the art in the area of SMC and observation presented in a clear, matter-of-fact style. As such it is appropriate for graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems. The resulting design procedures are emphasized using Matlab/Simulink software.