The Sixth Army Materials Technology Conference, IICeramics for High Performance Applications-II I-Reliabilityll , was co-sponsored by the Army Materials and Mechanics Research Center and the U. S. Department of Energy, Office of Transportation Programs . The program highlighted all issues relevant to the reliability of ceramics in advanced systems. The conference emphasized programmatic reviews of the major efforts on ceramic gas turbine technology, on an international basis. The conference showed how ceramic design, materials development, materials processing, NDE, and component systems testing are being integrated and iterated in specific engine development programs . Further , the conference promoted inter change among the various technical disciplines working in the advanced turbine and heat engine areas. This volume will join its earlier companions, Ceramics for High Performance A lications (1974), and Ceramics for High Performance Applications-II 1 7 ,in chronicling the rapid progress being made in the applicaton of ceramics to the very demanding service environ ment of gas turbine and piston engines. At the last meeting of this series at Newport, R t, in March 1977, successful high temperature tests of ceramic components in test rigs were described.

Several ceramic parts have already proven their suitability for serial application in automobile engines in very impressive ways, especially in Japan, the USA and in Germany. However, there is still a lack of economical quality assurance concepts. Recently, a new generation of ceramic components, for the use in energy, transportation and environment systems, has been developed. The efforts are more and more system oriented in this field. The only possibility to manage this complex issue in the future will be interdisciplinary cooperation. Chemists, physicists, material scientists, process engineers, mechanical engineers and engine manufacturers will have to cooperate in a more intensive way than ever before. The R&D activities are still concentrating on gas turbines and reciprocating engines, but also on brakes, bearings, fuel cells, batteries, filters, membranes, sensors and actuators as well as on shaping and cutting tools for low expense machining of ceramic components. This book summarizes the scientific papers of the 7th International Symposium "Ceramic Materials and Components for Engines". Some of the most fascinating new applications of ceramic meterials in energy, transportation and environment systems are presented. The proceedings shall lead to new ideas for interdisciplinary activities in the future.

Focusing on the work of component suppliers and materials characterization laboratories, this book provides a valuable insider's view of ceramic gas turbine development over the last two decades. Contributors who have been intimately involved with the manufacture and characterization of advanced ceramics for gas turbine-related work, share their first-hand experience and lessons learned. These important perspectives have led to improved materials and the development of new techniques to assess life prediction. This volume includes an insightful retrospective and examines the current status and prognosis of the industry, along with its future needs. This book will be of interest to engineering and management personnel at turbomachinery equipment manufacturers, suppliers of ceramic materials and components, researchers in government and private laboratories, university teaching staff and students, and personnel involved in planning and monitoring technology development programs.

The book summarizes the history and current status of the development of gas turbine engines and ancillary equipment using ceramic hot section components. Specifically, the book focuses on the evolution of component and engine designs, and the demonstration of design concepts through rig and engine testing of the ceramic gas turbine programs in the United States, Japan, Western Europe, and the countries of the former Soviet Union (primarily Russia). The 33 chapters cover ceramic gas turbine design in small gas turbines for automotive and cogeneration applications, midsize industrial and larger utility gas turbines, and aircraft and aeroderivative applications. Almost all of the book chapters have been prepared by technical personnel who are intimately involved in the development and demonstration of the ceramic gas turbine designs at their companies. The book will be of interest to engineering and management personnel at turbomachinery equipment manufacturers, development and fabrication personnel at suppliers of ceramic materials and components, researchers in government and private laboratories, teaching staff and students at technical colleges and universities, and personnel involved in planning and monitoring technology development programs. The theme emphasized throughout the book are the "lessons learned" from almost 40 years of ceramic gas turbine design and test experience. Learning directly from the experience of the researchers that took the ceramic gas turbine through the concept, preliminary, and detail design phases, while following the iterative design-test process cycles, is a unique way of becoming quickly familiar with the design challenges and solutions for using ceramics in gas turbine equipment. The book also amply demonstrates the hurdles that had to be ov

The Sixth Army Materials Technology Conference, IICeramics for High Performance Applications-II I-Reliabilityll , was co-sponsored by the Army Materials and Mechanics Research Center and the U. S. Department of Energy, Office of Transportation Programs . The program highlighted all issues relevant to the reliability of ceramics in advanced systems. The conference emphasized programmatic reviews of the major efforts on ceramic gas turbine technology, on an international basis. The conference showed how ceramic design, materials development, materials processing, NDE, and component systems testing are being integrated and iterated in specific engine development programs . Further , the conference promoted inter change among the various technical disciplines working in the advanced turbine and heat engine areas. This volume will join its earlier companions, Ceramics for High Performance A lications (1974), and Ceramics for High Performance Applications-II 1 7 ,in chronicling the rapid progress being made in the applicaton of ceramics to the very demanding service environ ment of gas turbine and piston engines. At the last meeting of this series at Newport, R t, in March 1977, successful high temperature tests of ceramic components in test rigs were described.

The Sixth Army Materials Technology Conference, IICeramics for High Performance Applications-II I-Reliabilityll , was co-sponsored by the Army Materials and Mechanics Research Center and the U. S. Department of Energy, Office of Transportation Programs . The program highlighted all issues relevant to the reliability of ceramics in advanced systems. The conference emphasized programmatic reviews of the major efforts on ceramic gas turbine technology, on an international basis. The conference showed how ceramic design, materials development, materials processing, NDE, and component systems testing are being integrated and iterated in specific engine development programs . Further , the conference promoted inter change among the various technical disciplines working in the advanced turbine and heat engine areas. This volume will join its earlier companions, Ceramics for High Performance A lications (1974), and Ceramics for High Performance Applications-II 1 7 ,in chronicling the rapid progress being made in the applicaton of ceramics to the very demanding service environ ment of gas turbine and piston engines. At the last meeting of this series at Newport, R t, in March 1977, successful high temperature tests of ceramic components in test rigs were described.