The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.

Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.

This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p>

This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.

A lot of recent developments have been made about adhesively bonded joints modeling using various methods of analysis. The increasing application of adhesives in industry is partly due to the increased sophistication and reliability of adhesive joints modeling. The book proposed intends to provide the designer with the most advanced stress analyses techniques in adhesive joints to reinforce the use of this promising bonding technique.

The use of adhesives continues to increase both in importance and in areas of use, particularly in engineering construction. Alongside this is a steady growth in our fundamental understanding of the factors involved. Both of these topics are reflected in various meetings and nowhere more consistently than at the Annual Conference on Adhesion and Adhesives at The City University each Easter. 1984 was the twenty-second of these when, once again, people carne from far and near to present accounts of their work and to discuss them in all their variety. This publication makes the papers available to the wider audience who were not able to attend in person. In presenting this volume, may I express sincere gratitude, both personally and on behalf of the University, to all those who contributed in so many and various ways to the conference. K. W. ALLEN Contents Preface. v l. Textile-to-Rubber Adhesion: Theory and Practice David B. Wootton (Milliken Industrials Ltd, Wellington Mill, Wellington Street, Bury, Lancashire BL8 2AY, UK) 2. Aspects of Adhesion Promotion with Flexible Coated Fabrics 13 J. R. Holker and A. J. G. Sagar (Shirley Institute, Didsbury, Manchester M20 8RX, UK) 3. The Adhesion of Some Ethylene-Vinyl Acetate Copolymers Applied as Hot Melt Coatings to Metals 33 T. A. Hatzinikolaou and D. E. Packham (School of Materials Science, University of Bath, Claverton Down, Bath BA2 7 A Y, UK) 4. Formation of Indium Bonds for Ultrasonic Systems and Examination of Metal Diffusion Bonds by Scanning Acoustic Microscopy .