Dieses aktuelle Referenzwerk behandelt numerische Optimierungsmethoden für Strömungsmaschinen und die wichtigsten industriellen Anwendungen. Grundlagen sind umfangreiche Forschung und Erfahrung der Autoren. Die logischen Zusammenhänge, um den Bereich der numerischen Strömungssimulation (CFD) zu verstehen, werden anhand der Grundlagen der Strömungsmechanik, von Strömungsmaschinen und ihrer Komponenten erläutert. Im Anschluss folgt eine Einführung in Methoden der Ein- und Mehrzieloptimierung, die automatische Optimierung, in Ersatzmodelle und Entwicklungsalgorithmen. Das Fachbuch schließt mit der ausführlichen Erklärung von Designansätzen und Anwendungen für Pumpen, Turbinen, Kompressoren und weiteren Systemen von Strömungsmaschinen. Der Nachdruck liegt hier bei Systemen für erneuerbare Energien. - Die Autoren sind führende Experten des Fachgebiets. - Ein handliches Fachbuch zu Optimierungsmethoden mittels numerischer Strömungssimulation bei Strömungsmaschinen. - Beschreibt wichtige Anwendungsbereiche in der Industrie und enthält Kapitel zu Systemen für erneuerbaren Energien. Design Optimization of Fluid Machinery ist ein wichtiger Leitfaden für Graduierte, Forscher und Ingenieure aus den Bereichen Strömungsmaschinen und zugehörige Optimierungsmethoden. Als Fachbuch mit allem Wissenswerten zu dem Thema richtet es sich an Studenten höherer Semester der Fachrichtungen Maschinenbau und verwandter Bereiche der Strömungssimulation und Luft-/Raumfahrttechnik.

The ongoing digitalization of the energy sector, which will make a large amount of data available, should not be viewed as a passive ICT application for energy technology or a threat to thermodynamics and fluid dynamics, in the light of the competition triggered by data mining and machine learning techniques. These new technologies must be posed on solid bases for the representation of energy systems and fluid machinery. Therefore, mathematical modelling is still relevant and its importance cannot be underestimated. The aim of this Special Issue was to collect contributions about mathematical modelling of energy systems and fluid machinery in order to build and consolidate the base of this knowledge.

"Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE)" is the proceedings of 4th International Symposium on Fluid Machinery and Fluid Engineering, held in Beijing November 24-27, 2008. It contains 69 highly informative technical papers presented at the Mei Lecture session and the technical sessions of the symposium. The Chinese Society of Engineering Thermophysics (CSET) organized the First, the Second and the Third International Symposium on Fluid Machinery and Fluid Engineering (1996, 2000 and 2004). The purpose of the 4th Symposium is to provide a common forum for exchange of scientific and technical information worldwide on fluid machinery and fluid engineering for scientists and engineers. The main subject of this symposium is "Fluid Machinery for Energy Conservation". The "Mei Lecture" reports on the most recent developments of fluid machinery in commemoration of the late professor Mei Zuyan. The book is intended for researchers and engineers in fluid machinery and fluid engineering. Jianzhong Xu is a professor at the Chinese Society of Engineering Thermophysics, Chinese Academy of Sciences, Beijing.

In the past Computational Fluid Dynamics (CFD) was confined to large organisations capable of developing and supporting their own codes. But recently there has been a rapid increase in the availability of reasonably priced commercial codes, and many more industrial organisations are now able to routinely use CFD. Advances of CFD in Fluid Machinery Design provide the perfect opportunity to find out what industry is doing and this book addresses how CFD is now being increasingly used in the design process, rather than as a post-design analysis tool. COMPLETE CONTENTS Trends in industrial use of CFD Challenges and methodologies in the design of axial flow fans for high-bypass-ratio, gas turbine engines using steady and unsteady CFD A three-dimensional inverse method based on pressure loading for the design of turbomachinery blades Application of CFD to the design and analysis of axial and centrifugal fans and compressors The design and performance of a transonic flow deswirling system – an application of current CFD design techniques tested against model and full-scale experiments Recent developments in unsteady flow modelling for turbomachinery aeroelasticity Computational investigation of flow in casing treatments for stall delay in axial flow fans Use of CFD for the three-dimensional hydrodynamic design of vertical diffuser pumps Recommendations to designers for CFD pump impeller and diffuser simulations Three dimensional CFD – a possibility to analyse piston pump flow dynamics CFD analysis of screw compressor performance Prediction of aerothermal phenomena in high-speed discstator systems Use of CFD in the design of a shaft seal for high-performance turbomachinery Users and potential users, of CFD for the design of fluid machinery, managers, designers, and researchers working in the field of ‘industrial flows’, will all find Advances of CFD in Fluid Machinery Design a valuable volume discussing state-of-the-art developments in CFD.

Based on course-tested material, this rigorous yet accessible graduate textbook covers both fundamental and advanced optimization theory and algorithms. It covers a wide range of numerical methods and topics, including both gradient-based and gradient-free algorithms, multidisciplinary design optimization, and uncertainty, with instruction on how to determine which algorithm should be used for a given application. It also provides an overview of models and how to prepare them for use with numerical optimization, including derivative computation. Over 400 high-quality visualizations and numerous examples facilitate understanding of the theory, and practical tips address common issues encountered in practical engineering design optimization and how to address them. Numerous end-of-chapter homework problems, progressing in difficulty, help put knowledge into practice. Accompanied online by a solutions manual for instructors and source code for problems, this is ideal for a one- or two-semester graduate course on optimization in aerospace, civil, mechanical, electrical, and chemical engineering departments.

The numerical optimization of practical applications has been an issue of major importance for the last 10 years. It allows us to explore reliable non-trivial configurations, differing widely from all known solutions. The purpose of this book is to introduce the state-of-the-art concerning this issue and many complementary applications are presented.

Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.

In a book that will be required reading for engineers, physicists, and computer scientists, the editors have collated a number of articles on fluid mechanics, written by some of the world’s leading researchers and practitioners in this important subject area.

Containing papers from the 12th International Conference on Advances in Fluid Mechanics, this book covers a wide range of topics including basic formulations and their computer modelling as well as the relationship between experimental and analytical results. The emphasis is on new applications and research currently in progress. The field of fluid mechanics is vast and has numerous and diverse applications. The contained research works discuss new studies in fluid mechanics and present the latest applications in the field. A wide range of topics are covered including, Computational methods; Boundary elements and other mesh reduction methods; Fluid structure interaction; Cooling of electronic devices; Environmental fluid dynamics; Industrial applications; Energy systems; Nano and micro fluids; Turbulent and complex flows; Jets; Droplet and spray dynamics; Bubble dynamics; Multiphase fluid flow; Pumping and fluid transportation; Experimental measurements; Rheology; Chemical reaction flow; Hydroelectromagnetic flow; High speed flow; Wave theory; Energy conversion systems.