Ceramic-matrix composites (CMCs) possess high specific strength and specific modulus and have already been applied in hot-section components of aeroengines. The book focuses on the design, fabrication and testing of different CMC components, e.g., turbine guide vanes, combustor liner, and turbine blisk, etc. The high-temperature mechanical properties, and performance requirements of the aeroengines were also introduced. The book can better help the engineering designers understand the methods used in design and testing of CMC components.

This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.

This book focuses on the vibration behavior of ceramic-matrix composites (CMCs), including (1) vibration natural frequency of intact and damaged CMCs; (2) vibration damping of CMCs considering fibers debonding and fracture; (3) temperature-dependent vibration damping of CMCs; (4) time-dependent vibration damping of CMCs; and (5) cyclic-dependent vibration damping of CMCs. Ceramic-matrix composites (CMCs) possess low material density (i.e., only 1/4 or 1/3 of high-temperature alloy) and high-temperature resistance, which can reduce cooling air and improve structure efficiency. Understanding the failure mechanisms and internal damage evolution represents an important step to ensure reliability and safety of CMCs. Relationships between microstructure, damage mechanisms, vibration natural frequency, and vibration damping of CMCs are established. This book helps the material scientists and engineering designers to understand and master the vibration behavior of CMCs at room and elevated temperatures.

The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The symposium also addressed new issues on fundamentals of fracture mechanics and contact mechanics, and a session on reliability and standardization.

Ceramic Matrix Composites: Lifetime and Strength Prediction Under Static and Stochastic Loading focuses on the strain response and lifetime prediction of fiber-reinforced ceramic-matrix composites under stress-rupture loading at intermediate temperatures. Typical damage mechanisms of matrix cracking, interface debonding and oxidation, and fiber's oxidation and fracture are considered in the micromechanical analysis. Effects of composite's constituent properties, peak stress, and testing temperature on the composite's strain response and lifetime are also analyzed in detail. Finally, a comparison of constant and different stochastic stress spectrum on composite's damage evolution and fracture is discussed. This book will be a practical guide for the material researcher and component designer needing to better understand the composite's damage and fracture behavior under stress-rupture loading at intermediate temperatures. - Contains detailed analysis of the stress-rupture behavior of fiber-reinforced ceramic-matrix composites - Includes experimental data on stress-rupture behavior of different CMCs - Presents micromechanical constituent models for characterizing damage and fracture behavior under stress-rupture loading - Provides data on the physical properties of each constituent at various temperatures, along with the composite's response

Processing, Properties, and Design of Advanced Ceramics and Composites II, Ceramic Transactions Volume 261 Narottam P. Bansal, Ricardo H. R. Castro, Michael Jenkins, Amit Bandyopadhyay, Susmita Bose, Amar Bhalla, J.P. Singh, Morsi M. Mahmoud, Gary Pickrell, and Sylvia Johnson; Editors This proceedings volume contains a collection of 36 papers (~350 pages) from the following symposia held during the 2016 Materials Science and Technology (MS&T’16) meeting held in Salt Lake City, UT, October 24-27, 2016: Advanced Materials for Harsh Environments Advances in Dielectric Materials and Electronic Devices Advances in Ceramic Matrix Composites Ceramic Optical Materials Controlled Synthesis, Processing, and Applications of Structural and Functional Nanomaterials Innovative Processing and Synthesis of Ceramics, Glasses and Composites International Standards for Properties and Performance of Advanced Ceramics Multifunctional Oxides Rustum Roy Memorial Symposium on Processing and Performance of Materials Using Microwaves, Electric, and Magnetic Fields Sintering and Related Powder Processing Science and Technology Surface Properties of Biomaterials Thermal Protection Materials and Systems Zirconia Based Materials for Cutting Edge Technology