Energy efficient lighting is said to be one of the most cost-effective approaches to save energy and reduce C02 emissions. In order to stimulate the application of lighting retrofits of good quality, IEA Task 50, Subtask B “Daylighting and Electric Lighting solutions” has looked into the assessment of existing and new technical retrofit solutions in the field of façade and daylighting technology, electric lighting and lighting controls. The document provides information for those involved in the development of retrofit products or involved in the decision making process of a retrofit project, such as buildings owners, authorities, designers and consultants, as well as the lighting and façade industry. This source book addresses both electric lighting solu¬tions and daylighting solutions, and offers a method to compare these retrofit solutions on a common basis, including a wide range of quality criteria of cost-related and lighting quality aspects. Simple retrofits, such as replacing a lamp or adding interior blinds, are widely accepted, often applied because of their low initial costs or short payback periods. The work presented in this report aims at promoting state-of-the-art and new lighting retrofit approaches that might cost more but offer a further reduction of energy consumption while improving lighting quality to a greater extend. Energieeffiziente Beleuchtung ist eine der effektivsten Möglichkeiten, Energie zu sparen und damit die Emission von CO2 zu vermindern. Im Rahmen des IEA Task 50, Subtask B “Daylighting and Electric Lighting solutions” wurden daher neue und vorhandene technische Sanierungslösungen für Gebäude in den Bereichen Fassade, Tageslichttechnik, künstliche Beleuchtung sowie Lichtsteuerung bewertet, um die Anwendung hochwertiger Lösungen voranzutreiben. Die Informationen sind dabei für alle in den Sanierungsprozess einbezogenen Personen von großem Interesse, wie z. B. Gebäudeeigentümer, Behörden, Planer und Berater aber auch für Hersteller und Entwickler von Beleuchtungs- und Fassadenlösungen. Betrachtet werden sowohl künstliche als auch Beleuchtungslösungen mit Tageslicht, wobei eine Methode entwickelt wurde, die Sanierungslösungen grundlegend miteinander zu vergleichen. Hierbei werden zahlreiche Kriterien berücksichtigt, die energetische, lichttechnische, thermische und kostenbezogene Aspekte beinhalten. Einfache Sanierungsmaßnahmen wie der Austausch von Lampen oder die Montage innenliegender Jalousien werden weitgehend akzeptiert und oft verwendet, da sie kostengünstig sind und sich schnell amortisieren. Die vorliegende Arbeit hat es sich zum Ziel gesetzt, die Anwendung neuer und dem Stand der Technik entsprechender Beleuchtungslösungen für die Sanierung zu fördern. Diese verursachen zwar eventuell höhere Kosten, ermöglichen jedoch eine weitere Energieeinsparung bei gleichzeitiger Verbesserung der Beleuchtungsqualität.

The ultimate guide to the retrofitting of lighting for greater efficiency and performance Retrofitting outdated energy-guzzling lighting components with green energy-saving alternatives is a process that promotes sustainability and offers significant benefits for businesses, contractors, and the community at large. Not only can retrofitting improve the overall quality and functionality of light, it also can make spaces safer, easier and less costly to maintain, and more comfortable to inhabit. From lighting technology to retrofit financial analysis, Lighting Retrofit and Relighting evaluates the latest lighting system types, then demonstrates how to apply them for the greatest functional and cost-saving benefit. This book: Discusses the recent advances in lighting equipment and retrofittable controls, for both interior and outdoor use Explains how to do a lighting audit to identify and evaluate logical retrofit choices Includes case studies of retrofits, illustrating improvements in the quality and efficacy of new lighting Demonstrates how cost savings realized over time can not only pay for new equipment but produce a return on the investment Lighting Retrofit and Relighting serves as an ideal reference for students or professionals—whether they are energy auditors, designers, installers, facilities managers, or manufacturers—by taking a close look at the most current lighting technology illuminating pathways toward a brighter future.

After nearly a century when electric lighting has dominated the design of building interiors, a return to the use of daylight as the main ambient light source is motivated by energy, environmental, and health considerations. Good daylighting of building interiors not only promotes low energy use, it has the potential to (re)connect humans to the natural cycle of day and night, which promotes health and well-being. Light is especially important to people in the Nordic countries because it is scarce for a large part of the year and over-abundant around the summer solstice. The unique character of daylight provided by the Nordic sky with its weak intensity in the winter and low sun angles in the summer demands careful study and attention, as it is more precious than in any other location. The current context of densifying cities makes it increasingly difficult to provide sufficient amounts of daylight in buildings under Nordic sky conditions, especially in winter. Analyses using advanced building simulation programs are often needed to predict daylight levels and adjust the building design accordingly. The relevant building regulations and certification schemes need to be understood in depth if they are to be followed by design practitioners. In addition, state-of-the-art electric lighting technologies such as LEDs and advanced control systems require a good integration with daylighting design. Addressing these issues, this book provides the essential knowledge and background to students and practicing professionals who wish to tackle the challenging endeavor of illuminating buildings under a Nordic sky using daylight as the main ambient light source, supplemented by energy-efficient electric lighting systems.

For multi-user PDF licensing, please contact customer service. Energy touches our lives in countless ways and its costs are felt when we fill up at the gas pump, pay our home heating bills, and keep businesses both large and small running. There are long-term costs as well: to the environment, as natural resources are depleted and pollution contributes to global climate change, and to national security and independence, as many of the world's current energy sources are increasingly concentrated in geopolitically unstable regions. The country's challenge is to develop an energy portfolio that addresses these concerns while still providing sufficient, affordable energy reserves for the nation. The United States has enormous resources to put behind solutions to this energy challenge; the dilemma is to identify which solutions are the right ones. Before deciding which energy technologies to develop, and on what timeline, we need to understand them better. America's Energy Future analyzes the potential of a wide range of technologies for generation, distribution, and conservation of energy. This book considers technologies to increase energy efficiency, coal-fired power generation, nuclear power, renewable energy, oil and natural gas, and alternative transportation fuels. It offers a detailed assessment of the associated impacts and projected costs of implementing each technology and categorizes them into three time frames for implementation.

Despite recent improvements in energy efficiency being made in new build, it is important that the existing commercial building sector also take action to meet emission reduction targets. The objectives and challenges of such action will reduce the risk of the sector becoming obsolete due to high energy use and poor environmental performance. This book presents a theory-based, practice-support methodology to deal with sustainable retrofitting opportunities for existing commercial buildings in warm climates using bioclimatic design as the basis. The book has four main parts, focusing on eco-design and renovation, bioclimatic retrofitting, technological and behavioural change and case studies of retrofitting exemplars. In the first part, the context of climate change effects on design and renovation at the city scale is discussed. The second part looks at bioclimatic retrofitting as a 'design guide' for existing buildings, highlighting the significance of architectural design and engineering systems for energy performance. The technological and behavioural contexts of the existing building sector – policies, modelling, monitoring and trend analysis in respect to energy and environmental performance – are covered in part three. The final part gives some case studies showing the effectiveness of strategies suggested for effective environmental performance. This book is a must-have guide for all involved in the design and engineering of retrofitting projects in warm climates.

Chapter “A Multi-functional Design Approach to Deal with New Urban Challenges” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

The bestselling introduction to the field, updated and expanded Construction Management Jumpstart is the definitive introduction to the field, providing a detailed walkthrough of each stage of a project from the construction manager’s perspective. Authoritative coverage of fundamental concepts and practices clearly delineates the manager’s role, while step-by-step guidance provides valuable instruction for essential management duties. This new third edition has been updated to reflect the field’s current environment and best practices, giving students a highly-relevant introduction to an evolving industry. Three new chapters include insightful discussion of the pre-construction phase, team management, and sustainability; challenging chapter review questions help reinforce important concepts and help translate them to practice. Construction managers work alongside project managers, and use many of the same tried-and-true techniques—but construction managers must also adhere to a vast array of industry-specific standards and regulations. This book helps you build a foundation in critical concepts and practices while tailoring traditional project management techniques to the construction management sphere. Understand essential management roles and responsibilities for each stage of a construction project Learn how to estimate costs, administer contracts, manage operations, monitor performance, assess risks, and more Explore critical concepts in planning and scheduling that help keep projects running on-time and on-budget Discover how Building Information Modeling software is impacting the industry, and how it affects construction management Evolving regulations, advancing technology, and economies in flux all impact the construction industry in a number of ways; management’s job is to clear obstacles to delivery and streamline the project’s completion. To be effective, construction managers must stay up to date on the latest tools and best practices, and have a strong grasp of the fundamentals of the role. Construction Management Jumpstart provides a practical, highly-relevant introduction to the field.

Optimal Design and Retrofit of Energy Efficient Buildings, Communities, and Urban Centers presents current techniques and technologies for energy efficiency in buildings. Cases introduce and demonstrate applications in both the design of new buildings and retrofit of existing structures. The book begins with an introduction that includes energy consumption statistics, building energy efficiency codes, and standards and labels from around the world. It then highlights the need for integrated and comprehensive energy analysis approaches. Subsequent sections present an overview of advanced energy efficiency technologies for buildings, including dynamic insulation materials, phase change materials, LED lighting and daylight controls, Life Cycle Analysis, and more. This book provides researchers and professionals with a coherent set of tools and techniques for enhancing energy efficiency in new and existing buildings. The case studies presented help practitioners implement the techniques and technologies in their own projects. - Introduces a holistic analysis approach to energy efficiency for buildings using the concept of energy productivity - Provides coverage of individual buildings, communities and urban centers - Includes both the design of new buildings and retrofitting of existing structures to improve energy efficiency - Describes state-of-the-art energy efficiency technologies - Presents several cases studies and examples that illustrate the analysis techniques and impact of energy efficiency technologies and controls

Buildings account for almost half of total primary energy use and related greenhouse emissions worldwide. Although current energy systems are improving, they still fall disappointingly short of meeting acceptable limits for efficiency. Well-trained energy auditors are essential to the success of building energy efficiency programs-and Energy Audit