Databook of the Most Important Polymer and Rubber Additives is a vital reference for anyone working with polymers and rubbers. It provides key information on the properties of the most widely used additives that can be used to alter the physical, chemical, and mechanical properties of rubbers and plastics. Additives are presented by their main chemical component, with information for each additive provided in the form of a table divided into 5 sections, covering General Information, Physical Properties, Health and Safety Considerations, Ecological Impact, and Use and Applications. Data provided includes CAS#, acid/base properties, odor, various cloud points, volatility data, surface tension, thermal conductivity, explosion limits, carcinogenicity, oxygen demands, biodegradation probability, air pollution data, applications in different polymers and products, processing requirements and doses, food approvals, substitutes, and more. The companion book, The Encyclopedia of Polymer and Rubber Additives, contains information on the mechanisms of action of each group of additives, their suitable features and modifications, their effect and interferences in complex formulations, and it is illustrated with numerous experimental examples highlighting their performance. - Provides information on the properties of key additives that can be used to alter the physical, chemical, and mechanical properties of rubbers and plastics - Covers general information, physical properties, health and safety considerations, ecological impact, and use and applications - Presents additives by their main chemical component, discussing anticaking agents, antidegradants, antifogging agents, curatives, crosslinkers, defoaming agents, fillers, nucleating agents, pigments, solvents, stabilizers, vulcanizing agents, and more

Encyclopedia of Polymer and Rubber Additives documents how polymer properties and performance can be improved through the use of additives, resulting in enhanced physical properties, stability, improved process and assembly, extended shelf life, enhanced purity, and minimized environmental impact. 88 groups of additives used by all segments of the polymer and rubber industries are included, with each group discussed in a systematic manner in order to facilitate easy information retrieval and comparison. Typical chemical structures, mechanisms of action, influences and interferences in complex formulations, and evidence of performance from experimental studies are each featured, with frequent references to monographic sources for even more in-depth knowledge of the subject. The companion volume, Databook of the Most Important Polymer and Rubber Additives is also available. It contains robust technical data on the most essential additives currently in use, and the two books are must-have references for anyone working with rubbers and plastics. - Provides a complete set of tables, classifications, and information related to a wide variety of commercially used additives for polymers and rubbers - Details the characteristics of hundreds of additives that can improve performance of physical properties, stability, and storage life, provide colorants, reduce costs, enhance purity, and minimize environmental impact - Facilitates information retrieval and comparison, discussing mechanisms of action, suitable features, modifications, evidence of performance from experimental studies, and more

This new edition includes better values of properties already reported, properties not reported in time for the earlier edition, and entirely new properties becoming important for modern polymer applications. It also contains 217 total polymers, 20 of which are all-new, particularly in high-technology areas such as eletrical conductivity, non-linear optical properties, microlithography, nanophotonics, and electroluminescences. Examples of specific polymers include silsesquoxane ladder polymers, 'foldamer' self-assembling polymers, and block copolymers that phase separate into 'mushrooms', ellipsoids, and sheets with on surface radically different in properties from the other.

Handbook of Polymer Processing Additives provides insights on the selection of additives, their performance mechanisms, essential application properties, and a complete analysis of related literature and patents. Acid scavengers, air release, anticaking, antigassing, anti-gelling, anti-settling, hydrolysis stabilizers, and moisture scavengers are each covered. Information on the use of additives in various products is divided into sections on types, concentrations, usage, advantages and disadvantages, effects on product properties, and examples of formulation. Processing methods are similarly divided into sections on types and concentrations, effects on the process, effect on product properties, advantages and disadvantages, and examples of formulation. All essential aspects of chemistry, physical properties, influence on properties of final products, formulations, methods of incorporation, analysis and effects on health and environment are considered. The book is an excellent companion to the Databook of Polymer Processing Additives. - Covers the applications, manufacturing, selection and performance mechanisms of polymer processing additives - Provides a complete analysis of the current literature and patents of these additives - Discusses reasons for use, advantages and disadvantages, effects on product properties, methods of incorporation, and effects on health and the environment - Includes discussions on antiblocking agents, antioxidants, biocides, flame retardants, nucleating agents, solvents, plasticizers, and more

This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.

In this data book, both conventional Py-GC/MS where thermal energy alone is used to cause fragmentation of given polymeric materials and reactive Py-GC/MS in the presence of organic alkaline for condensation polymers are compiled. Before going into detailed presentation of the data, however, acquiring a firm grip on the proper understanding about the situation of Py-GC/MS would promote better utilization of the following pyrolysis data for various polymers samples. This book incorporates recent technological advances in analytical pyrolysis methods especially useful for the characterization of 163 typical synthetic polymers. The book briefly reviews the instrumentation available in advanced analytical pyrolysis, and offers guidance to perform effectually this technique combining with gas chromatography and mass spectrometry. Main contents are comprehensive sample pyrograms, thermograms, identification tables, and representative mass spectra (MS) of pyrolyzates for synthetic polymers. This edition also highlights thermally-assisted hydrolysis and methylation technique effectively applied to 33 basic condensation polymers. - Coverage of Py-GC/MS data of conventional pyrograms and thermograms of basic 163 kinds of synthetic polymers together with MS and retention index data for pyrolyzates, enabling a quick identification - Additional coverage of the pyrograms and their related data for 33 basic condensation polymers obtained by the thermally-assisted hydrolysis and methylation technique - All compiled data measured under the same experimental conditions for pyrolysis, gas chromatography and mass spectrometry to facilitate peak identification - Surveyable instant information on two facing pages dedicated to the whole data of a given polymer sample

Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.

An Updated Edition of the Classic Text Polymers constitute the basis for the plastics, rubber, adhesives, fiber, and coating industries. The Fourth Edition of Introduction to Physical Polymer Science acknowledges the industrial success of polymers and the advancements made in the field while continuing to deliver the comprehensive introduction to polymer science that made its predecessors classic texts. The Fourth Edition continues its coverage of amorphous and crystalline materials, glass transitions, rubber elasticity, and mechanical behavior, and offers updated discussions of polymer blends, composites, and interfaces, as well as such basics as molecular weight determination. Thus, interrelationships among molecular structure, morphology, and mechanical behavior of polymers continue to provide much of the value of the book. Newly introduced topics include: Nanocomposites, including carbon nanotubes and exfoliated montmorillonite clays The structure, motions, and functions of DNA and proteins, as well as the interfaces of polymeric biomaterials with living organisms The glass transition behavior of nano-thin plastic films In addition, new sections have been included on fire retardancy, friction and wear, optical tweezers, and more. Introduction to Physical Polymer Science, Fourth Edition provides both an essential introduction to the field as well as an entry point to the latest research and developments in polymer science and engineering, making it an indispensable text for chemistry, chemical engineering, materials science and engineering, and polymer science and engineering students and professionals.

Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs

Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies