Analysis of mathematics techniques of planning and management used in the construction industry and known as critical path methods (cpm) - covers the use of computers, and includes a comparison of cmp and pert (programme evaluation and review techniques) of network analysis.

Tavistock Press was established as a co-operative venture between the Tavistock Institute and Routledge & Kegan Paul (RKP) in the 1950s to produce a series of major contributions across the social sciences. This volume is part of a 2001 reissue of a selection of those important works which have since gone out of print, or are difficult to locate. Published by Routledge, 112 volumes in total are being brought together under the name The International Behavioural and Social Sciences Library: Classics from the Tavistock Press. Reproduced here in facsimile, this volume was originally published in 1968 and is available individually. The collection is also available in a number of themed mini-sets of between 5 and 13 volumes, or as a complete collection.

Tavistock Press was established as a co-operative venture between the Tavistock Institute and Routledge & Kegan Paul (RKP) in the 1950s to produce a series of major contributions across the social sciences. This volume is part of a 2001 reissue of a selection of those important works which have since gone out of print, or are difficult to locate. Published by Routledge, 112 volumes in total are being brought together under the name The International Behavioural and Social Sciences Library: Classics from the Tavistock Press. Reproduced here in facsimile, this volume was originally published in 1968 and is available individually. The collection is also available in a number of themed mini-sets of between 5 and 13 volumes, or as a complete collection.

This unique tool provides a fresh approach to construction scheduling by focusing on ways in which the Critical Path Method (CPM) can be used to answer the important questions that arise on virtually every construction project. Critical Path Method (CPM) Tutor for Construction Planning and Scheduling helps commercial contractors meet today’s ever-increasing demands to improve operational efficiency and increase profitability. The construction schedule is heavily dependent upon the skill of the practitioner and responsible participants, and one which greatly impacts the efficiency, cost, and overall success or failure of a project. This book explains the practical application of the CPM, the most widely used and taught technique for construction planning and scheduling. You’ll be guided through each step of the CPM process--from planning and communication to deciding payment and/or claims. Practitioners and students will quickly understand both the mechanics and the use of the CPM. Contractors will be able to apply this knowledge to plan their work more completely, better communicate their plans, accurately evaluate the impact of delays, and make better on-the-spot decisions. Features real-world construction examples and worked problems Describes how to measure on-site/field productivity and address potential issues Shows how to effectively communicate progress, targets, and requests with subcontractors and stakeholders

The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Business School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves. The second edition of this book has seen corrections, additions and amendments in detail throughout the book. Moreover Chapter 15 on "Dynamic Scheduling with ProTrack" has been completely rewritten and extended with a section on "ProTrack as a research tool".

Key Productivity and Performance Strategies to Advance Your STEM Career shares valuable knowledge and insights on best practices used by high performing individuals in the STEM fields to enhance their professional endeavors. The strategies contained in this book are based on Lesia L. Crumpton-Young's experience and expertise as a STEM professional and a certified Life and Career Coach. The book includes real-life examples from STEM professionals of career hurdles and efficient solutions to reaching your career goals. It covers effective goal setting, decision-making, and how best to overcome doubt and criticism, as well as practical advice on critical path analysis. Finally, the book includes a five-year career planning tool, along with additional problem statements and exercises, making it a valuable resource those involved in the STEM fields.

An easy-to-follow guide to the theory and practice of project scheduling and control No matter how large or small the construction project, an efficient, well-thought-out schedule is crucial to achieving success. The schedule manages all aspects of a job, such as adjusting staff requirements at various stages, overseeing materials deliveries and equipment needs, organizing inspections, and estimating time needs for curing and settling—all of which requires a deep understanding on the part of the scheduler. Written by a career construction professional, Construction Project Scheduling and Control, Second Edition has been fully revised with up-to-date coverage detailing all the steps needed to devise a technologically advanced schedule geared toward streamlining the construction process. Solved and unsolved exercises reinforce learning, while an overview of industry standard computer software sets the tone for further study. Some of the features in this Second Edition include: Focus on precedence networks as a viable solution to scheduling, the main part of project control The concepts of Dynamic Minimal Lag, a new CPM technique developed by the author A new chapter on schedule risk management By combining basic fundamentals with advanced techniques alongside the robust analysis of theory to enhance real-world applications, Construction Project Scheduling and Control is an ideal companion for students and professionals looking to formulate a schedule for a time-crunched industry in need of better ways to oversee projects.

This fast-paced business novel does for project management what The Goal and It's Not Luck have done for production and marketing. Goldratts novels have traditionally slain sacred cows and delivered new ways of looking at processes which seem like common sense once you read them. Critical Chain is no exception. In perhaps Elis most readable book yet, two of the established principles of project management, the engineering estimate and project milestones, are found wanting and dismissed, and other established principles are up for scrutiny - as Goldratt once more applies his Theory of Constraints. The approach is radical, yet clear, understandable and logical. New techniques are introduced, and Project Buffers, Feeding Buffers, Limit Multitasking, Improved Communications and Correct Measurements make them work. Goldratt even handles the complicated statistics of dispersed variability versus accumulated variability so deftly you wont even be aware of learning about them - theyll just seem like more common sense! Critical Chain is critical reading for anyone who deals with projects. If you use block diagrams, drawings or charts to keep track of your activities, you are managing a project - and this book is for you.