Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.

Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. - Explores the literature between 1950 and 2020 and contains over 2000 references - Offers the most complete monograph on the issue - Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair - Delivers the most complete review on corrosion of metals in marine/offshore environments - Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms

The new edition of LaQue's classic text on marine corrosion, providing fully updated control engineering practices and applications Extensively updated throughout, the second edition of La Que's Handbook of Marine Corrosion remains the standard single-source reference on the unique nature of seawater as a corrosive environment. Designed to help readers reduce operational and life cycle costs for materials in marine environments, this authoritative resource provides clear guidance on design, materials selection, and implementation of corrosion control engineering practices for materials in atmospheric, immersion, or wetted marine environments. Completely rewritten for the 21st century, this new edition reflects current environmental regulations, best practices, materials, and processes, with special emphasis placed on the engineering, behavior, and practical applications of materials. Divided into three parts, the book first explains the fundamentals of corrosion in marine environments, including atmospheric corrosion, erosion, microbiological corrosion, fatigue, environmental cracking, and cathodic delamination. The second part discusses corrosion control methods and materials selection that can mitigate or eliminate corrosion in different marine environments. The third section provides the reader with specific applications of corrosion engineering to structures, systems, or components that exist in marine environments. This much-needed new edition: Presents a comprehensive and up-to-date account of the science and engineering aspects of marine corrosion Focuses on engineering aspects, descriptive behavior, and practical applications of materials usage in marine environments Addresses the various materials used in marine environments, including metals, polymers, alloys, coatings, and composites Incorporates current regulations, standards, and recommended practices of numerous organizations such as ASTM International, the US Navy, the American Bureau of Shipping, the International Organization for Standardization, and the International Maritime Organization Written in a clear and understandable style, La Que's Handbook of Marine Corrosion, Second Edition is an indispensable resource for engineers and materials scientists in disciplines spanning the naval, maritime, commercial, shipping industries, particularly corrosion engineers, ship designers, naval architects, marine engineers, oceanographers, and other professionals involved with products that operate in marine environments.

Cathodic protection (CP) mitigates the high cost of steel and other alloys corroded in seawater and seabed sediments. Marine Corrosion and Cathodic Protection is a comprehensive guide to corrosion issues and presents methodologies to tackle common offshore code-based CP designs. Advanced theory is developed for non-routine CP applications, with and without subsea coating systems. The interactions between CP and the fatigue and hydrogen embrittlement characteristics of alloys are explained. Sacrificial (or galvanic) anodes and impressed current systems are examined, followed by descriptions of successful and unsuccessful applications on petroleum installations, harbours, jetties, pipelines, windfarm foundations, ships and floating production storage and offloading vessels FPSOs. Retrofit CP systems for the life extension of assets, together with methods for applying CP internally in both static and flowing systems are evaluated. A critical review of the role of physical and computational modelling in CP design and evaluation addresses the more geometrically complex applications. Techniques for, and limitation of, CP surveying, inspection and monitoring are explained in the context of system management. This text is ideal for engineers, designers, manufacturers, equipment suppliers and operators of offshore CP systems.

Contains papers presented at a November 2000 symposium, examining laboratory evaluation methods, test methods, and model prediction in research on atmospheric corrosion, corrosion of rebar in concrete, marine corrosion, and other related corrosion phenomena. Topics include degradation of fiber reinf