In EC3, the fatigue life of a steel structure subjected to a cyclic load is estimated by its detail category. This category is based on the S-N, curves which are obtained by applying the Basquin model. Statistically, this model does not allow extrapolating the S-N curves in the HCF region, neither does it consider the runouts. This affects the fatigue life estimation when a structure bears loading in HCF. To overcome these deficiencies, a new method based on a Weibull distribution is applied.

This book presents selected contributions from ICMFM XX and the Polish National Conference—KKMP. The XX International Colloquium on Mechanical Fatigue of Metals (ICMFM XX) was organized on 15–17 September 2021, in the Faculty of Mechanical Engineering of the Wroclaw University of Science and Technology, in Wrocław City, Poland, in a remote form. Its aim was to facilitate and encourage the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of fatigue of metals, looking at the problem of fatigue from a multiscale perspective, and exploring analytical and numerical simulative approaches, without losing the perspectives of the application. The Polish National Conference—KKMP 2021—was organized remotely with 50–80 prominent international participants from the fracture mechanics community.

This work highlights how the costs and CO2-emissions of land-based wind turbines can be reduced by means of an innovative and material efficient support structure concept. Thereby the yaw system is placed at the tower base, allowing the whole wind turbine tower to be rotated. The potential of a rotatable inclined lattice tower concept was analysed by means of aero-servo-elastic load simulations in the FAST environment. A balance between different cost aspects revealed significant savings.

In EC3, the fatigue life of a steel structure subjected to a cyclic load is estimated by its detail category. This category is based on the S-N, curves which are obtained by applying the Basquin model. Statistically, this model does not allow extrapolating the S-N curves in the HCF region, neither does it consider the runouts. This affects the fatigue life estimation when a structure bears loading in HCF. To overcome these deficiencies, a new method based on a Weibull distribution is applied. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.

Trends in the Analysis and Design of Marine Structures is a collection of the papers presented at MARSTRUCT 2019, the 7th International Conference on Marine Structures held in Dubrovnik, Croatia, 6-8 May 2019. The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, and the sixth in Lisbon, Portugal in May 2017. This Conference series specialises in dealing with Ships and Offshore Structures, addressing topics in the fields of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation - Structural Reliability, Safety and Environmental Protection. Trends in the Analysis and Design of Marine Structures is an essential document for academics, engineers and all professionals involved in the area of analysis and design of Ships and Offshore Structures. About the series: The ‘Proceedings in Marine Technology and Ocean Engineering’ series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Research goal of the present monograph is the establishment of an efficient engineering approach, which will include straightforward but accurate simulation models, in order to estimate the residual stress fields of welded joints introduced during welding and their post-weld treatment with High Frequency Hammer Peening. The present subject lies on the intersection of structural engineering, material science and computational mechanics.

This work presents a design approach that links fatigue resistance of cast steel component to permissible defect sizes. It is based on fractures mechanics, is in line with experiences of the last 60 years and validated by extensive experimental as well as numerical investigations on different scales and under consideration of real casting defects. By following established assessment methods, the design concept is adapted to practical building applications.

Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.

Fracture, Fatigue, Failure and Damage Evolution, Volume 8 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: In-situ Techniques for Fracture & Fatigue General Topics in Fracture & Fatigue Fracture & Fatigue of Composites Damage, Fracture, Fatigue & Durability Interfacial Effects in Fracture & Fatigue Damage Detection in Fracture & Fatigue