Recommends design criteria, construction standards and related safety measures. Appends model safety certificates.

The Assembly, at its twenty-sixth session (23 November to 2 December 2009), adopted by resolution A.1023(26) the Code for the Construction and Equipment of Mobile Offshore Drilling Units, 2009 (2009 MODU Code), which had been developed following a thorough revision of the 1989 MODU Code adopted by resolution A.649(16). In adopting the 2009 MODU Code, the Assembly recalled in particular that, since the adoption of the 1989 MODU Code, the Organization had adopted a significant number of amendments to many of the regulations of the International Convention for the Safety of Life at Sea, 1974 (SOLAS) referenced in the Code, and also that the International Civil Aviation Organization (ICAO) had adopted amendments to the Convention on International Civil Aviation which impacted on the provisions for helicopter facilities as contained in the Code. The 2009 MODU Code provides an international standard for MODUs of new construction which will facilitate their international movement and operation and ensure a level of safety for such units and for personnel on board, equivalent to that required by the 1974 SOLAS Convention and the Protocol of 1988 relating to the International Convention on Load Lines, 1966, for conventional ships engaged on international voyages. The 2009 MODU Code supersedes the 1989 MODU Code for mobile offshore drilling units, the keels of which are laid or which are at a similar stage of construction on or after 1 January 2012. For MODUs constructed before that date, the provisions of the 1989 MODU Code still apply.

The Code for the Construction and Equipment of Mobile Offshore Drilling Units, 2009 (2009 MODU Code) provides an international standard for mobile offshore drilling units (MODU) constructed on or after 1 January 2012. It facilitates their international movement and operation and ensures a level of safety for such units and for personnel on board, equivalent to that required by the 1974 SOLAS Convention and the Protocol of 1988 relating to the International Convention on Load Lines, 1966, for conventional ships engaged on international voyages.This edition of the 2009 MODU Code incorporates the 2013 (MSC.359(92)), 2014 (MSC.384(94) and MSC.387(94)), 2016 (MSC.407(96)) and 2017 (MSC.435 (98)) amendments to the Code.For mobile offshore drilling units constructed before 1 January 2012, the provisions of the previous MODU Codes (1989 and 1979) apply, depending on the date of their construction

These Guidelines have been developed for the design and construction of new offshore supply vessels with a view to promoting the safety of such vessels and their personnel, recognizing the unique design features and service characteristics of these vessels. Furthermore, these Guidelines provide a standard of safety equivalent to the relevant requirements of the International Convention for the Safety of Life at Sea, 1974, as amended, and in particular to the stability criteria of the Code on Intact Stability for all Types of Ships Covered by IMO Instruments (IS Code), as amended. Provisions fo.

Ship and Mobile Offshore Unit Automation: A Practical Guide: A Practical Guide gives engineers a much-needed reference on relevant standards and codes, along with practical case studies on how to use these standards on actual projects and plans. Packed with the critical procedures necessary for each phase of the project, the book also gives an outlook on trends of development for control and monitoring systems, including usage of artificial intelligence in software development and prospects for the use of autonomous vessels.Rounding out with a glossary and introductory chapter specific to the new marine engineer just starting, this book delivers a source of valuable information to help offshore engineers be better prepared to safely and efficiently design today's offshore unit control systems. - Helps readers understand the worldwide offshore unit regulations necessary for monitoring systems and automation installation, including ISO, IEC, IEEE, IMO, SOLAS AND MODU, ABS, DNVGL, API, NMA and NORSOK - Presents real-world examples that apply standards - Provides tactics on how to procure control and monitoring systems specific to the offshore industry

Gives training programmes for persons working on fishing vessels of length smaller than 12 m and up to 24 m and over. Includes details on training in radar use and navigation, survival techniques, engine-room duties, handling of the catch, maintenance of fishing equipment, etc.