The increasing complexity and automation of flight control systems pose a challenge to federal policy regarding aircraft certification and pilot training. Despite significant commercial aviation safety improvements over the past two decades, flight control automation and aircraft complexity have been cited as contributing factors in a number of major airline accidents, including two high-profile crashes overseas involving the recently introduced Boeing 737 Max variant in 2018 and 2019. These crashes have directed attention to Federal Aviation Administration (FAA) oversight of aircraft type certification and pilot training practices for transport category aircraft, particularly as they pertain to complex automated flight control systems. As aircraft systems have evolved over the past three decades to incorporate new technologies, Congress has mandated FAA to streamline certification processes, with the primary motivation being to facilitate the development of new safety-enhancing technologies. Modern commercial aircraft rely on "fly-by-wire" flight control technologies, under which pilots' flight control inputs are sent to computers rather than through direct mechanical linkages to flight control systems. The fly-by-wire software contains flight control laws and logic that, in addition to optimizing performance efficiency, protect the aircraft from commanded actions that could put the airplane in an unsafe state. Automated flight control systems have largely been viewed as having a positive effect on safety, and accident rates have improved considerably over the past two decades. However, the increasing complexity of automated flight systems has sometimes caused confusion and uncertainty, contributing to improper pilot actions during critical phases of flight and in some cases leading pilots to unintentionally place an aircraft in an unsafe condition. Besides designing these systems in a manner that minimizes pilot errors and the consequences of those errors, aircraft designers and operators face challenges regarding maintaining piloting skills for flight crews to be able to take over and manually fly the aircraft safely if critical systems fail. They also face challenges regarding documentation and pilot training effectiveness in building accurate mental models of how these complex systems operate. The primary goals of ongoing efforts to address these challenges are to enhance pilot situation awareness when using automation and reduce the likelihood of mode errors and confusion, while at the same time not overburdening pilots with intricate systems knowledge beyond what is necessary. In the ongoing investigations of two Boeing 737 Max crashes, Lion Air flight 610 and Ethiopian Airlines flight 302, concerns have been raised about the design of an automated feature called the Maneuvering Characteristics Augmentation System (MCAS) and its reliance on a single angle-of-attack sensor even though the aircraft is equipped with two such sensors. These concerns led to the worldwide grounding of all Boeing 737 Max aircraft until the MCAS safety concerns can be resolved, significantly impacting both U.S. and foreign airlines that operate the aircraft. These recent aviation accidents have prompted reviews of the manner in which modern transport category aircraft are certified by FAA and its foreign counterparts, and in particular, the roles of regulators and manufacturers in the certification process. The challenges of certifying increasingly complex aircraft are largely being met by delegating more of FAA's certification functions to aircraft designers and manufacturers. This raises potential conflicts between safety and quality assurance on the one hand and competitive pressures to market and deliver aircraft on the other. Under Organization Designation Authorization (ODA), FAA can designate companies to carry out delegated certification functions on its behalf.

First published in 1999, this volume examined how increasing cockpit automation in commercial fleets across the world has had a profound impact on the cognitive work that is carried out on the flight deck. Pilots have largely been transformed into supervisory controllers, managing a suite of human and automated resources. Operational and training requirements have changed, and the potential for human error and system breakdown has shifted. This compelling book critically examines how airlines, regulators, educators and manufacturers cope with these and other consequences of advanced aircraft automation.

The advent of very compact, very powerful digital computers has made it possible to automate a great many processes that formerly required large, complex machinery. Digital computers have made possible revolutionary changes in industry, commerce, and transportation. This book, an expansion and revision of the author's earlier technical papers on this subject, describes the development of automation in aircraft and in the aviation system, its likely evolution in the future, and the effects that these technologies have had -- and will have -- on the human operators and managers of the system. It suggests concepts that may be able to enhance human-machine relationships in future systems. The author focuses on the ability of human operators to work cooperatively with the constellation of machines they command and control, because it is the interactions among these system elements that result in the system's success or failure, whether in aviation or elsewhere. Aviation automation has provided great social and technological benefits, but these benefits have not come without cost. In recent years, new problems in aircraft have emerged due to failures in the human-machine relationship. These incidents and accidents have motivated this inquiry into aviation automation. Similar problems in the air traffic management system are predicted as it becomes more fully automated. In particular, incidents and accidents have occurred which suggest that the principle problems with today's aviation automation are associated with its complexity, coupling, autonomy, and opacity. These problems are not unique to aviation; they exist in other highly dynamic domains as well. The author suggests that a different approach to automation -- called "human-centered automation" -- offers potential benefits for system performance by enabling a more cooperative human-machine relationship in the control and management of aircraft and air traffic.

Despite the strong safety record of the national airspace system, serious disruptions occasionally occur, often as a result of outdated or failed equipment. Under these circumstances, safety relies on the skills of the controllers and pilots and on reducing the number of aircraft in the air. The current and growing pressures to increase the capacity to handle a greater number of flights has led to a call for faster and more powerful equipment and for equipment that can take over some of the tasks now being performed by humans. Increasing the role of automation in air traffic control may provide a more efficient system, but will human controllers be able to effectively take over when problems occur? This comprehensive volume provides a baseline of knowledge about the capabilities and limitations of humans relative to the variety of functions performed in air traffic control. It focuses on balancing safety with the expeditious flow of air traffic, identifying lessons from past air accidents. The book discusses The function of the national airspace system and the procedures for hiring, training, and evaluating controllers. Decisionmaking, memory, alertness, vigilance, sleep patterns during shift work, communication, and other factors in controllers' performance. Research on automation and human factors in air traffic control and incorporation of findings into the system. The Federal Aviation Administration's management of the air traffic control system and its dual mandate to promote safety and the development of air commerce. This book also offers recommendations for evaluation the human role in automated air traffic control systems and for managing the introduction of automation into current facilities and operations. It will be of interest to anyone concerned about air safety--policymakers, regulators, air traffic managers and controllers, airline officials, and passenger advocates.

Automation in air traffic control may increase efficiency, but it also raises questions about adequate human control over automated systems. Following on the panel's first volume on air traffic control automation, Flight to the Future (NRC, 1997), this book focuses on the interaction of pilots and air traffic controllers, with a growing network of automated functions in the airspace system. The panel offers recommendations for development of human-centered automation, addressing key areas such as providing levels of automation that are appropriate to levels of risk, examining procedures for recovery from emergencies, free flight versus ground-based authority, and more. The book explores ways in which technology can build on human strengths and compensate for human vulnerabilities, minimizing both mistrust of automation and complacency about its abilities. The panel presents an overview of emerging technologies and trends toward automation within the national airspace systemâ€"in areas such as global positioning and other aspects of surveillance, flight information provided to pilots an controllers, collision avoidance, strategic long-term planning, and systems for training and maintenance. The book examines how to achieve better integration of research and development, including the importance of user involvement in air traffic control. It also discusses how to harmonize the wide range of functions in the national airspace system, with a detailed review of the free flight initiative.

Achieve excellence on the automated flight deck! The first practical guide that shows professional pilots how to safely transition to the automated flight deck Today's remarkable aircraft require remarkable airmanship skills. Automation Airmanship is a breakthrough book that helps pilots master these skills by introducing Nine Principles for Operating Glass Cockpit Aircraft. The nine principles were derived from over a decade of fi eldwork with organizations worldwide that have successfully transitioned to advanced aircraft fleets. Each principle provides a building block for a simplifi ed, straightforward, and disciplined approach to operating increasingly complex aircraft safely and effectively in demanding operational environments. Written by experienced airline captains who have trained others through the glass cockpit transition, this book presents ideas useful to both veteran glass cockpit pilots and those new to the twenty-first century flight deck. More than a simple list of skills, this powerful resource draws on real-life examples, providing the roadmap you need to successfully transition from steam to glass--and maintain a performance edge for your entire career. Features: In-flight experience of experts Success stories and lessons learned from across the industry Real-world accident investigations to underscore the importance of these principles Powerful tools to avoid errors or to resolve them when issues arise A guide to fundamentals of automated flight deck architecture Principles and practices for all phases of flight operations

Pilot Competency and Capability presents strategies for the air carrier pilot-in-command operating complex engineered systems within a complex natural environment. It bridges the gap between academic books and practical application by providing real-world examples of how various safety and operational theories work in practice. The book advises on how to develop concepts, strategies, and ways of thinking that integrate with existing structures and FAA regulations, while understanding how engineered systems and codified structures interface with complex natural environments. It considers how the prescribed safety margins function to manage emergent behaviors of both the natural environment and the engineered systems. The book is intended for airline pilots, training captains, simulator instructors, and aviation students taking courses in aviation safety, risk management, and flight safety to improve in-flight decision-making, risk analysis, and strategic planning.