High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. - Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases - Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys - Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings

This book addresses the recent trends in high-temperature coatings that are used to provide oxidation and wear resistance to metallic/ceramic components in extreme environments. Ceramics, intermetallics, organosilicon polymers, cermets, and other materials with great thermal stability have long been recognized for these applications. This book introduces the state of the art in coating materials and processes for high-temperature environments and identifies areas for improvement in materials selection, performance upgrades, design considerations, and manufacturing methods. The book covers a variety of high-temperature coatings prepared through various synthesis processes such as thermal spraying, physical vapor deposition, electrodeposition, and sol–gel methods. It covers corrosion/oxidation, phase stability, and thermal and mechanical behavior of high-temperature coating materials having greater thermal stability. With contributions from international researchers active in the field, this edited book features the most recent and up-to-date literature references for a broad readership consisting of academic and industrial professionals. It is suitable for graduate students as well as scientists and engineers working in the area of anti-corrosion and anti-wear resistant high-temperature coatings for industrial applications.

This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.

Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.

This book addresses the recent trends in thermal and environmental barrier coatings and their applications in extreme environments. It introduces the state of the art in coating materials and processes for high and ultrahigh-temperature environments and identifies areas for improvement in materials selection, performance upgrades, design considerations, and manufacturing methods. This book also covers fundamental studies involving modelling, creating coating architectures, coating preparation methods, and coating capability throughout a wide temperature range. The book examines a variety of high-temperature coatings prepared through various synthesis processes such as thermal spraying, electron beam evaporation, and sol–gel methods. This book also covers ultrahigh-temperature ceramic (UHTC) materials and provides a brief overview of the synthesis method, densification processes, and coating methods along with the properties and applications of emerging high entropy UHTCs. With contributions from international researchers active in the field, this edited book features the most recent and up-to-date literature references for a broad readership consisting of academic and industrial professionals. It is suitable for graduate students as well as materials scientists and engineers working in the area of high and ultrahigh-temperature ceramic materials.

Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. - Includes coverage of emerging materials, such as rare-earth doped ceramics - Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) - Discusses the degradation of TBCs caused by CMAS attack and its protection - Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier

The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.

The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase their applications across different industries. Composites and Advanced Materials for Industrial Applications is a critical scholarly resource that examines recent advances in the field of application of composite materials. Featuring coverage on a broad range of topics such as nanocomposites, hybrid composites, and fabrication techniques, this book is a vital reference source for engineers, academics, researchers, students, professionals, and practitioners seeking current research on improvements in manufacturing processes and developments of new analytical and testing methods.

The first comprehensive book to focus on ultra-high temperature ceramic materials in more than 20 years Ultra-High Temperature Ceramics are a family of compounds that display an unusual combination of properties, including extremely high melting temperatures (>3000°C), high hardness, and good chemical stability and strength at high temperatures. Typical UHTC materials are the carbides, nitrides, and borides of transition metals, but the Group IV compounds (Ti, Zr, Hf) plus TaC are generally considered to be the main focus of research due to the superior melting temperatures and stable high-melting temperature oxide that forms in situ. Rather than focusing on the latest scientific results, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications broadly and critically combines the historical aspects and the state-of-the-art on the processing, densification, properties, and performance of boride and carbide ceramics. In reviewing the historic studies and recent progress in the field, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications provides: Original reviews of research conducted in the 1960s and 70s Content on electronic structure, synthesis, powder processing, densification, property measurement, and characterization of boride and carbide ceramics. Emphasis on materials for hypersonic aerospace applications such as wing leading edges and propulsion components for vehicles traveling faster than Mach 5 Information on materials used in the extreme environments associated with high speed cutting tools and nuclear power generation Contributions are based on presentations by leading research groups at the conference "Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications II" held May 13-19, 2012 in Hernstein, Austria. Bringing together disparate researchers from academia, government, and industry in a singular forum, the meeting cultivated didactic discussions and efforts between bench researchers, designers and engineers in assaying results in a broader context and moving the technology forward toward near- and long-term use. This book is useful for furnace manufacturers, aerospace manufacturers that may be pursuing hypersonic technology, researchers studying any aspect of boride and carbide ceramics, and practitioners of high-temperature structural ceramics.

This concise survey describes the requirements on materials operating in high-temperature environments and the processes that increase the temperature capability of metals, ceramics, and composites. The major part deals with the applicable materials and their specific properties, with one entire chapter devoted to coatings. Written for engineering and science students, researchers, and managers in industry.