Comes with a CD-ROM packed with a variety of problem-solving projects.

Presents complete information on various programming techniques, from the basic areas to dozens of advanced concepts. Includes thousands of illustrations, tables, formulas, tips, shortcuts and real-world examples. Offers unparalleled reference material useful for skills training at all levels of CNC. Presents an encyclopedic, logically organized... more » approach to CNC programming, allowing the reader to look up a subject of interest only. Uses cross references throughout to guide the reader to the proper answer or solution to a problem.

Provides descriptions of many operation and programming functions and their practical application to turning and milling machines. End-of-chapter study questions make the book suitable for use as a textbook. The second edition adds two chapters on CAD/CAM and conversational programming. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Before the introduction of automatic machines and automation, industrial manufacturing of machines and their parts for the key industries were made though manually operated machines. Due to this, manufacturers could not make complex profiles or shapes with high accuracy. As a result, the production rate tended to be slow, production costs were very high, rejection rates were high and manufacturers often could not complete tasks on time.Industry was boosted by the introduction of the semi-automatic manufacturing machine, known as the NC machine, which was introduced in the 1950’s at the Massachusetts Institute of Technology in the USA. After these NC machine started to be used, typical profiles and complex shapes could get produced more readily, which in turn lead to an improved production rate with higher accuracy.Thereafter, in the 1970’s, an even larger revolutionary change was introduced to manufacturing, namely the use of the CNC machine (Computer Numerical Control). Since then, CNC has become the dominant production method in most manufacturing industries, including automotive, aviation, defence, oil and gas, medical, electronics industry, and the optical industry. Basics of CNC Programming describes how to design CNC programs, and what cutting parameters are required to make a good manufacturing program. The authors explain about cutting parameters in CNC machines, such as cutting feed, depth of cut, rpm, cutting speed etc., and they also explain the G codes and M codes which are common to CNC. The skill-set of CNC program writing is covered, as well as how to cut material during different operations like straight turning, step turning, taper turning, drilling, chamfering, radius profile, profile turning etc. In so doing, the authors cover the level of CNC programming from basic to industrial format. Drawings and CNC programs to practice on are also included for the reader.

This is the book and the ebook combo product. Over its first two editions, this best-selling book has become the de facto standard for training and reference material at all levels of CNC programming. Used in hundreds of educational institutions around the world as the primary text for CNC courses, and used daily by many in-field CNC programmers and machine operators, this book literally defines CNC programming. Written with careful attention to detail, there are no compromises. Many of the changes in this new Third Edition are the direct result of comments and suggestions received from many CNC professionals in the field. This extraordinarily comprehensive work continues to be packed with over one thousand illustrations, tables, formulas, tips, shortcuts, and practical examples. The enclosed CD-ROM now contains a fully functional 15-day shareware version of CNC tool path editor/simulator, NCPlot(TM). This powerful, easy-to-learn software includes an amazing array of features, many not found in competitive products. NCPlot offers an unmatched combination of simplicity of use and richness of features. Support for many advanced control options is standard, including a macro interpreter that simulates Fanuc and similar macro programs. The CD-ROM also offers many training exercises based on individual chapters, along with solutions and detailed explanations. Special programming and machining examples are provided as well, in form of complete machine files, useful as actual programming resources. Virtually all files use Adobe PDF format and are set to high resolution printing.

Second edition. Revised and updated (January 2021). With free graphic simulation software, upgrade of procedures and images. This book is designed for students and teachers who are looking for a programming course in combination with a graphic simulation software. The course is based on the understanding of the ‘ISO Standard’ functions, i.e. the programming language at the basis of all numeric controls. The training and simulating software faithfully replicates a real numeric control on your computer. This course comprises chapters and paragraphs for both theoretical and practical learning. Paragraphs on theory contain drawings and diagrams that simplify the understanding of the text. The first practical experiences consist in the utilization of pre-drafted programs, which are useful to the participant’s initial understanding of the numeric control and its potential. Later you will learn how to write new programs with difficulty levels that are commensurate to the acquired experience. During the practical exercises the reader is constantly guided by the respective operating procedures. The learning method has been developed so that even beginners may complete the course and understand all the most complex functions and programming methods. Periodical tests are offered in order to help the students and teachers assess progress achieved or to highlight the topics for review. This is a fifty-hour course. The total number of hours necessary for the understanding of the theoretical part and for carrying out the practical exercises will always be specified at the beginning of each chapter. The course is centered on a three-axis lathe (X, Z, C) with driven tools, then the concepts applied to the programming of the lathe will be used to program a three-axis vertical mill (X, Y, Z). All the programs used during the explanations and the collection of the images contained in the book, which may be printed, viewed or displayed during the course at home or in the classroom may be downloaded from the website cncwebschool.com. Finally the book contains a list of technical terms and their translation from English into Italian and German.

The book is basically written with a view to project Computer Numerical Control Programming (CNC) Programming for machines. This book shows how to write, read and understand such programs for modernizating manufacturing machines. It includes topics such as different programming codes as well as different CNC machines such as drilling and milling.

A Practical Guide to CNC Machining Get a thorough explanation of the entire CNC process from start to finish, including the various machines and their uses and the necessary software and tools. CNC Machining Handbook describes the steps involved in building a CNC machine to custom specifications and successfully implementing it in a real-world application. Helpful photos and illustrations are featured throughout. Whether you're a student, hobbyist, or business owner looking to move from a manual manufacturing process to the accuracy and repeatability of what CNC has to offer, you'll benefit from the in-depth information in this comprehensive resource. CNC Machining Handbook covers: Common types of home and shop-based CNC-controlled applications Linear motion guide systems Transmission systems Stepper and servo motors Controller hardware Cartesian coordinate system CAD (computer-aided drafting) and CAM (computer-aided manufacturing) software Overview of G code language Ready-made CNC systems

The first part of Volume I outlines the origins and development of CNC machine tools. It explains the construction of the equipment and also discusses the various elements necessary to ensure high quality of production. The second part considers how a company justifies the purchase of either cells or systems and illustrates why simulation exercises are essential prior to a full implementation. Communication protocols as well as networking topologies are examined. Finally, the important high-speed machining developments and the drive towards ultra-high precision are mentioned. Following a brief historical introduction to cutting tool development, chapters 1 and 2 of Volume II explain why CNC requires a change in cutting tool technology from conventional methods. A presentation is given of the working knowledge of cutting tools and cutting fluids which is needed to make optimal use of the productive capacity of CNC machines. Since an important consideration for any machine tool is how one can locate and restrain the workpiece in the correct orientation and with the minimum of set-up time, chapter 3 is concerned with workholding technology. Volume III deals with CNC programming. It has been written in conjunction with a major European supplier of controllers in order to give the reader a more consistent and in-depth understanding of the logic used to program such machines. It explains how why and where to program specific features of a part and how to build them up into complete programs. Thus, the reader will learn about the main aspects of the logical structure and compilation of a program. Finally, there is a brief review of so me of the typical controllers currently available from both universal and proprietary builders.

This unique reference features nearly all of the activities a typical CNC operator performs on a daily basis. Starting with overall descriptions and in-depth explanations of various features, it goes much further and is sure to be a valuable resource for anyone involved in CNC.