The degree of danger in the atmosphere of a hazardous location needs to be determined prior to selecting an acceptable electrical equipment installation. If maximum safety is the predominant factor in determining the type of electrical installations, the cost of electrical equipment will be extremely high. If low cost of electrical installation is the predominant factor, safety to personnel and equipment may be unacceptably low. It is, therefore, necessary to find a point of balance at which the cost and safety requirements are both satisfied and acceptable. In nine out of ten cases, a hazardous location is classified much too conservatively. The reason for this conservative approach is a lack of knowledge and a misunderstanding of the actual concept of safety and danger. This book provides an in-depth understanding of the factors that influence the classification of a hazardous location. One factor, in combination with one or more other factors, will have an impact on the level of danger and its hazardous boundaries. These factors and their influences are explained in detail, and once their impact is understood, the classification of a hazardous location becomes a straightforward procedure.

Due to an increase in the wide-range of chemicals in petrochemical processing industries, as well as frequency of use, there has been a steady rise in flammability problems and other hazards. Hazardous Area Classification in Petroleum and Chemical Plants: A Guide to Mitigating Risk outlines the necessities of explosion protection in oil, gas and chemical industries, and discusses fire and occupancy hazards, extinguishing methods, hazard identification, and classification of materials. This book addresses these issues and concerns and presents a simple hazard identification system to help offset future problems. It offers information on the hazards of various materials and their level of severity as it relates to fire prevention, exposure, and control. The system provides an alerting signal and on-the-spot information to help protect lives in an industrial plant or storage location during fire emergencies. Understanding the hazard helps to ensure that the process equipment is properly selected, installed, and operated to provide a safe operating system. This text also includes a summary of the rules, methods, and requirements for fighting a fire, introduces various hazard identification systems. • Includes a summary of the rules, methods, and requirements needed to extinguish a fire • Introduces various hazard identification systems • Includes concepts for layout and spacing of equipment in process plants The book serves as resource for plant design engineers as well as plant protection and safety personnel in planning for effective firefighting operations.

The security and economic stability of many nations and multinational oil companies are highly dependent on the safe and uninterrupted operation of their oil, gas and chemical facilities. One of the most critical impacts that can occur to these operations are fires and explosions from accidental or political incidents. This publication is intended as a general engineering handbook and reference guideline for those personnel involved with fire and explosion protection aspects of critical hydrocarbon facilities. Design guidelines and specifications of major, small and independent oil companies as well as information from engineering firms and published industry references have been reviewed to assist in its preparation. Some of the latest published practices and research into fire and explosions have also been mentioned.

Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.

A report presenting an approach applicable to classification of upstream and downstream petroleum facilities by consideration of the individual point source procedure in Chapter 5 of the Area Classification Code.

Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.

Risk Management in the Oil and Gas Industry: Offshore and Onshore Concepts and Case Studies delivers the concepts, strategies and good practices of offshore and onshore safety engineering that are applicable to petroleum engineering and immediately surrounding industries. Guided by the strategic risk management line, this reference organizes steps in order of importance and priority that should be given to the themes in the practical exercise of risk management activities, from the conceptual and design phase to operational and crisis management situations. Each chapter is packed with practical case studies, lessons learned, exercises, and review questions. The reference also touches on the newest techniques, including liquefied natural gas (cryogenics) operations and computer simulations that contemplate the influence of human behavior. Critical for both the new and experienced engineer, this book gives the best didactic tool to perform operations safely and effectively. Helps readers by presenting practical case studies and exercises that are included in every chapter Presents an understanding on how to approach and apply best practices specific to the oil and gas industry, both offshore and onshore Provides the knowledge needed to gain new techniques in computer simulation and human factors to apply to various sectors of the industry, including subsea and refineries

When accidents occur in the oil and gas industry, the impacts can be profound. Serious injury or death to workers, environmental disasters and colossal costs for insurance or clean ups make the industry a hazardous one to operate in. Disasters become major news events such as the Prestige oil spill, Piper Alpha, Exxon Valdez oil spill and Deepwater Horizon. A move towards improving the health and safety of the industry is underway. This book emphasizes controlling, managing, and mitigating the risk of hazards in the oil and gas industry, increasing safety, and protecting the environment by identifying the hazards in the oil and gas industry through safety engineering techniques and management methods. Safety Engineering in the Oil and Gas Industry discusses how to improve safety and reliability in the oil and gas industry so that hazards can be reduced to the lowest level feasible. It covers the techniques needed to operate safely in an oil and/or gas industry setting, the standards that should be adhered to, the impacts of PPE, fire and explosions, equipment and infrastructure failures and storage and reliability engineering, amongst many other topics. This book is written in an easy-to-read and appealing style and multiple-choice questions are included to help with learning and understanding the concepts included. Underpinned by real life case studies and examples, this book aims to allow readers to consider how they can reduce the costs associated with bad safety practices to their business through maintained and consistent health, safety and environmental (HSE) standards. This book is a must-read for any student or professional studying or working in the oil and gas industries. It also has additional appeal to those with an academic or professional interest in occupational health and safety, civil engineering, offshore engineering and maritime engineering.

Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees' is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. - The process safety encyclopedia, trusted worldwide for over 30 years - Now available in print and online, to aid searchability and portability - Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources