Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined. The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described. - A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced - Reflects the growth in complexity and stature of chemical engineering over the last few years - Supported with further reading at the end of each chapter and graded problems at the end of the book

This textbook provides a comprehensive introduction to chemical process engineering, linking the fundamental theory and concepts to the industrial day-to-day practice. It bridges the gap between chemical sciences and the pratical chemical industry. It enables the reader to integrate fundamental knowledge of the basic disciplines, to understand the most important chemical processes, and to apply this knowledge to the practice in the industry.

Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Written by two of the most prolific and respected chemical engineers in the world, this groundbreaking two-volume set is the “new standard” in the industry, offering engineers and students alike the most up-do-date, comprehensive, and state-of-the-art coverage of processes and best practices in the field today. This first new volume in a two-volume set explores and describes integrating new tools for engineering education and practice for better utilization of the existing knowledge on process design. Useful not only for students, professors, scientists and practitioners, especially process, chemical, mechanical and metallurgical engineers, it is also a valuable reference for other engineers, consultants, technicians and scientists concerned about various aspects of industrial design. The text can be considered as a complementary text to process design for senior and graduate students as well as a hands-on reference work or refresher for engineers at entry level. The contents of the book can also be taught in intensive workshops in the oil, gas, petrochemical, biochemical and process industries. The book provides a detailed description and hands-on experience on process design in chemical engineering, and it is an integrated text that focuses on practical design with new tools, such as Excel spreadsheets and UniSim simulation software. Written by two industry and university’s most trustworthy and well-known authors, this book is the new standard in chemical, biochemical, pharmaceutical, petrochemical and petroleum refining. Covering design, analysis, simulation, integration, and, perhaps most importantly, the practical application of Microsoft Excel-UniSim software, this is the most comprehensive and up-to-date coverage of all of the latest developments in the industry. It is a must-have for any engineer or student’s library.

This reference outlines the fundamental concepts and strategies for economic assessments for informed management decisions in industry. The book illustrates how to prepare capital cost and operating expense estimates, profitability analyses, and feasibility studies, and how to execute sensitivity and uncertainty assessments. From financial reports to opportunity costs and engineering trade-offs, Process Engineering Economics considers a wide range of alternatives for profitable investing and for projecting outcomes in various chemical and engineering fields. It also explains how to monitor costs, finances, and economic limitations at every stage of chemical project design, preparation, and evaluation.

Chemical Process Engineering presents a systematic approach to solving design problems by listing the needed equations, calculating degrees-of-freedom, developing calculation procedures to generate process specifications- mostly pressures, temperatures, compositions, and flow rates- and sizing equipment. This illustrative reference/text tabulates numerous easy-to-follow calculation procedures as well as the relationships needed for sizing commonly used equipment.

Drawing on his own extensive experience, Jones provides rules of thumb essential for the new engineer in industry. Covering responsibilities such as project management, installation of new facilities and implementation of contracts, this book offers a wealth of experience and knowledge, helping newer process engineers to find a foothold in their chosen industry.

Written by two of the most prolific and respected chemical engineers in the world, this groundbreaking two-volume set is the “new standard” in the industry, offering engineers and students alike the most up-do-date, comprehensive, and state-of-the-art coverage of processes and best practices in the field today. This first new volume in a two-volume set explores and describes integrating new tools for engineering education and practice for better utilization of the existing knowledge on process design. Useful not only for students, professors, scientists and practitioners, especially process, chemical, mechanical and metallurgical engineers, it is also a valuable reference for other engineers, consultants, technicians and scientists concerned about various aspects of industrial design. The text can be considered as a complementary text to process design for senior and graduate students as well as a hands-on reference work or refresher for engineers at entry level. The contents of the book can also be taught in intensive workshops in the oil, gas, petrochemical, biochemical and process industries. The book provides a detailed description and hands-on experience on process design in chemical engineering, and it is an integrated text that focuses on practical design with new tools, such as Excel spreadsheets and UniSim simulation software. Written by two industry and university’s most trustworthy and well-known authors, this book is the new standard in chemical, biochemical, pharmaceutical, petrochemical and petroleum refining. Covering design, analysis, simulation, integration, and, perhaps most importantly, the practical application of Microsoft Excel-UniSim software, this is the most comprehensive and up-to-date coverage of all of the latest developments in the industry. It is a must-have for any engineer or student’s library.