This book presents the work of RILEM Technical Committee 270-CIM: Benchmarking Chloride Ingress Models on Real-life Case Studies - Theory and Practice. It provides a comparative benchmark analysis of various types of chloride ingress models with emphasis on short, medium and long-term predictions. The book is subdivided in five chapters. The first chapter is an introduction on the benchmark and selected cases. The second chapter reports theoretical backgrounds of various analytical and numerical models for chloride ingress, followed by a short description of the models employed in the benchmark analysis. Chapter three describes the benchmark results of the Marine Submerged case, and chapter 4 of the Road Sprayed case. The last chapter reports conclusions, guidelines for calibration and recommendations. The book will benefit academics, designers, engineers, consultants, but also asset owners and standardization committees interested in durability and service life assessment of concrete structures.

This book presents the work of RILEM Technical Committee 270-CIM: Benchmarking Chloride Ingress Models on Real-life Case Studies - Theory and Practice. It provides a comparative benchmark analysis of various types of chloride ingress models with emphasis on short, medium and long-term predictions. The book is subdivided in five chapters. The first chapter is an introduction on the benchmark and selected cases. The second chapter reports theoretical backgrounds of various analytical and numerical models for chloride ingress, followed by a short description of the models employed in the benchmark analysis. Chapter three describes the benchmark results of the Marine Submerged case, and chapter 4 of the Road Sprayed case. The last chapter reports conclusions, guidelines for calibration and recommendations. The book will benefit academics, designers, engineers, consultants, but also asset owners and standardization committees interested in durability and service life assessment of concrete structures.

This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.

This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.

This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinforced concrete structures. Engineers have a range of sophisticated techniques at their disposal to assess the condition of reinforced concrete structures that do not cause material damage and which usually enable the structure to be used while the surveys are carried out. Non-destructive evaluation of the infrastructure also plays a key role in calculating and prioritising where money should be spent on repair or replacement. Providing details of related techniques and case studies, this book offers an overview of how to plan and implement the NDT of reinforced concrete structures.

This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.

fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.

Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More

The book assembles the latest research on new design techniques in water supplies using desalinated seawater. The authors examine the diverse issues related to the intakes and outfalls of these facilities. They clarify how and why these key components of the facilities impact the cost of operation and subsequently the cost of water supplied to the consumers. The book consists of contributed articles from a number of experts in the field who presented their findings at the "Desalination Intakes and Outfalls" workshop held at King Abdullah University of Science and Technology (KAUST) in Saudi Arabia in October, 2013. The book integrates coverage relevant to a wide variety of researchers and professionals in the general fields of environmental engineering and sustainable development.