This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as “automotive systems engineering”. These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

'Automotive Computer Controlled Systems' explains the fundamental principles of engineering that lie behind the operation of vehicle electronic systems. Having obtained this knowledge, the reader will be able to make full use of the diagnostic equipment which is currently available. The book builds on the concepts contained in Vehicle Electronic Systems and Fault Diagnosis and gives clear steps to fault diagnosis and subsequent repair of the vehicle's electronic systems. The author discusses electronics only within the context of the vehicle systems under consideration, and thus keeps theory to a minimum. Allan Bonnick has written articles for several transport/vehicle journals and carries out consultancy work for the Institute of Road Transport Engineers. In addition, he has had many years teaching experience and is ideally placed to write this informative guide.

This book presents the state of the art, challenges and future trends in automotive software engineering. The amount of automotive software has grown from just a few lines of code in the 1970s to millions of lines in today’s cars. And this trend seems destined to continue in the years to come, considering all the innovations in electric/hybrid, autonomous, and connected cars. Yet there are also concerns related to onboard software, such as security, robustness, and trust. This book covers all essential aspects of the field. After a general introduction to the topic, it addresses automotive software development, automotive software reuse, E/E architectures and safety, C-ITS and security, and future trends. The specific topics discussed include requirements engineering for embedded software systems, tools and methods used in the automotive industry, software product lines, architectural frameworks, various related ISO standards, functional safety and safety cases, cooperative intelligent transportation systems, autonomous vehicles, and security and privacy issues. The intended audience includes researchers from academia who want to learn what the fundamental challenges are and how they are being tackled in the industry, and practitioners looking for cutting-edge academic findings. Although the book is not written as lecture notes, it can also be used in advanced master’s-level courses on software and system engineering. The book also includes a number of case studies that can be used for student projects.

This textbook introduces advanced control systems for vehicles, including advanced automotive concepts and the next generation of vehicles for ITS.

Written by two of the most respected, experienced and well-known researchers and developers in the field (e.g., Kiencke worked at Bosch where he helped develop anti-breaking system and engine control; Nielsen has lead joint research projects with Scania AB, Mecel AB, Saab Automobile AB, Volvo AB, Fiat GM Powertrain AB, and DaimlerChrysler. Reflecting the trend to optimization through integrative approaches for engine, driveline and vehicle control, this valuable book enables control engineers to understand engine and vehicle models necessary for controller design and also introduces mechanical engineers to vehicle-specific signal processing and automatic control. Emphasis on measurement, comparisons between performance and modelling, and realistic examples derive from the authors’ unique industrial experience . The second edition offers new or expanded topics such as diesel-engine modelling, diagnosis and anti-jerking control, and vehicle modelling and parameter estimation. With only a few exceptions, the approaches

This book introduces the principles and practices in automotive systems, including modern automotive systems that incorporate the latest trends in the automobile industry. The fifteen chapters present new and innovative methods to master the complexities of the vehicle of the future. Topics like vehicle classification, structure and layouts, engines, transmissions, braking, suspension and steering are illustrated with modern concepts, such as battery-electric, hybrid electric and fuel cell vehicles and vehicle maintenance practices. Each chapter is supported with examples, illustrative figures, multiple-choice questions and review questions. Aimed at senior undergraduate and graduate students in automotive/automobile engineering, mechanical engineering, electronics engineering, this book covers the following: Construction and working details of all modern as well as fundamental automotive systems Complexities of operation and assembly of various parts of automotive systems in a simplified manner Handling of automotive systems and integration of various components for smooth functioning of the vehicle Modern topics such as battery-electric, hybrid electric and fuel cell vehicles Illustrative examples, figures, multiple-choice questions and review questions at the end of each chapter

This book is the second volume reflecting the shift in the design paradigm in automobile industry. It presents contributions to the second and third workshop on Automotive Systems Engineering held in March 2013 and Sept. 2014, respectively. It describes major innovations in the field of driver assistance systems and automated vehicles as well as fundamental changes in the architecture of the vehicles.

Contains practical insights into automotive system safety with a focus on corporate safety organization and safety management Functional Safety has become important and mandated in the automotive industry by inclusion of ISO 26262 in OEM requirements to suppliers. This unique and practical guide is geared toward helping small and large automotive companies, and the managers and engineers in those companies, improve automotive system safety. Based on the author’s experience within the field, it is a useful tool for marketing, sales, and business development professionals to understand and converse knowledgeably with customers and prospects. Automotive System Safety: Critical Considerations for Engineering and Effective Management teaches readers how to incorporate automotive system safety efficiently into an organization. Chapters cover: Safety Expectations for Consumers, OEMs, and Tier 1 Suppliers; System Safety vs. Functional Safety; Safety Audits and Assessments; Safety Culture; and Lifecycle Safety. Sections on Determining Risk; Risk Reduction; and Safety of the Intended Function are also presented. In addition, the book discusses causes of safety recalls; how to use metrics as differentiators to win business; criteria for a successful safety organization; and more. Discusses Safety of the Intended Function (SOTIF), with a chapter about an emerging standard (SOTIF, ISO PAS 21448), which is for handling the development of autonomous vehicles Helps safety managers, engineers, directors, and marketing professionals improve their knowledge of the process of FS standards Aimed at helping automotive companies—big and small—and their employees improve system safety Covers auditing and the use of metrics Automotive System Safety: Critical Considerations for Engineering and Effective Management is an excellent book for anyone who oversees the safety and development of automobiles. It will also benefit those who sell and market vehicles to prospective customers.

Focusing on the vehicle's most important subsystems, this book features an introduction by the editor and 40 SAE technical papers from 2001-2006. The papers are organized in the following sections, which parallel the steps to be followed while building a complete final system: Introduction to Safety-Critical Automotive Systems Safety Process and Standards Requirements, Specifications, and Analysis Architectural and Design Methods and Techniques Prototyping and Target Implementation Testing, Verifications, and Validation Methods

Modern Automotive Technology details the construction, operation, diagnosis, service, and repair of late-model automobiles and light trucks. This comprehensive text uses a building block approach that starts with the fundamental principles of system operation and progresses gradually to complex diagnostic and service procedures. Short sentences, concise definitions, and thousands of color illustrations help students learn quickly and easily The 1998 edition has been extensively revised and provides thorough coverage of the latest developments in the automotive field, including OBD II diagnostics, IM 240 testing, misfire monitoring, air bag systems, anti-lock brakes, and security systems. Organized around the eight ASE automobile test areas, this text is a valuable resource for students preparing for a career in automotive technology, as well as experienced technicians preparing for the ASE Certification/Recertification Tests.