Used to clean the borehole, stabilize rock, control pressures, or enhance drilling rates, drilling fluids and their circulation systems are used in all phases of a drilling operation. These systems are highly dynamic and complicated to model until now. Written by an author with over 25 years of experience, Applied Drilling Circulation Systems: Hydraulics, Calculations and Models provide users with the necessary analytical/numerical models to handle problems associated with the design and optimization of cost-effective drilling circulation systems. The only book which combines system modeling, design, and equipment, Applied Drilling Circulation Systems: Hydraulics, Calculations and Models provides a clear and rigorous exposition of traditional and non-traditional circulation systems and equipment followed by self contained chapters concerning system modelling applications. Theories are illustrated by case studies based on the author's real life experience. The book is accompanied by a website which permits readers to construct, validate, and run models employing Newtonian fluids, Bingham Plastic fluids, Power Law fluids, and aerated fluids principles. This combination book and website arrangement will prove particularly useful to drilling and production engineers who need to plan operations including pipe-tripping, running-in casing, and cementing. - In-depth coverage of both on- and offshore drilling hydraulics. - Methods for optimizing both on- and offshore drilling hydraulics. - Contains problems and solutions based on years of experience.

Drilling circulation systems in the oil and gas industry have advanced significantly in the last decade. The major changes resulted from the merging of air and gas drilling and underbalanced drilling with traditional liquid drilling systems. During the several years of teaching drilling engineering courses in both academic and industry, the authors realised the need for a book that covers modern drilling practices. The books that are currently available fill to provide adequate information about how engineering principles are applied to solving problems that are frequently encountered in drilling systems. This fact motivated the authors to write this book. This book is written primarily for well-drilling engineers and college students of both senior and graduate levels.

Applied Gaseous Fluid Drilling Engineering: Design and Field Case Studies provides an introduction on the benefits of using gaseous fluid drilling engineering. In addition, the book describes the multi-phase systems needed, along with discussions on stability control. Safety and economic considerations are also included, as well as key components of surface equipment needed and how to properly select equipment depending on the type of fluid system. Rounding out with proven case studies that demonstrate good practices and lessons from failures, this book delivers a practical tool for understanding the guidelines and mitigations needed to utilize this valuable process and technology. - Helps readers gain a framework of understanding regarding the basic processes, technology and equipment needed for gaseous fluid drilling operations - Highlights benefits and challenges using drilling flow charts, photos of relevant equipment, and table comparisons of available fluid systems - Presents multiple case studies involving successful and unsuccessful operations

The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.

An all-in-one reference combining hydrodynamic theory with drilling applications for the design, planning, and optimization of drilling operations Hydromechanical processes underlie the majority of technology operations in drilling and present a crucial concern as the pace and depth of drilling increasesin today's energy-hungry world. Applied Hydro-aeromechanics in Oil and Gas Drilling offers a unique resource for properly modeling and understanding the hydro-dynamic forces affecting a drilling site. Combining hydrodynamic theory with specific drilling applications, this coverage provides readers with a comprehensive reference for designing, planning, and optimizing drilling operations. Featuring the latest technologies and developments affecting the field, Applied Hydro-aeromechanics in Oil and Gas Drilling covers topics including: The physics of hydro-aeromechanical phenomena in drilling processes Calculation methods for understanding and designing circulation systems for the washing, blasting, and cementing of wells Problems of interaction between wells and reservoirs Problems with the fluid, gas, and liquid-gas mixture flows necessary in designing and building of wells Presenting an unmatched combination of theory, modeling issues, and concrete, illustrative examples, Applied Hydro-aeromechanics in Oil and Gas Drilling bringstogether formerly widespread technical information to offer a systematic and methodical guide. It is an essential reference for both students and researchers studying fluid mechanics, as well as engineers and other professionals working in the oil and gas industry.

Completely up to date and the most thorough and comprehensive reference work and learning tool available for drilling engineering, this groundbreaking volume is a must-have for anyone who works in drilling in the oil and gas sector. Petroleum and natural gas still remain the single biggest resource for energy on earth. Even as alternative and renewable sources are developed, petroleum and natural gas continue to be, by far, the most used and, if engineered properly, the most cost-effective and efficient, source of energy on the planet. Drilling engineering is one of the most important links in the energy chain, being, after all, the science of getting the resources out of the ground for processing. Without drilling engineering, there would be no gasoline, jet fuel, and the myriad of other "have to have" products that people use all over the world every day. Following up on their previous books, also available from Wiley-Scrivener, the authors, two of the most well-respected, prolific, and progressive drilling engineers in the industry, offer this groundbreaking volume. They cover the basic tenets of drilling engineering, the most common problems that the drilling engineer faces day to day, and cutting-edge new technology and processes through their unique lens. Written to reflect the new, changing world that we live in, this fascinating new volume offers a treasure of knowledge for the veteran engineer, new hire, or student. This book is an excellent resource for petroleum engineering students, reservoir engineers, supervisors & managers, researchers and environmental engineers for planning every aspect of rig operations in the most sustainable, environmentally responsible manner, using the most up-to-date technological advancements in equipment and processes.

Applied Well Cementing Engineering delivers the latest technologies, case studies, and procedures to identify the challenges, understand the framework, and implement the solutions for today's cementing and petroleum engineers. Covering the basics and advances, this contributed reference gives the complete design, flow and job execution in a structured process. Authors, collectively, bring together knowledge from over 250 years of experience in cementing and condense their knowledge into this book. Real-life successful and unsuccessful case studies are included to explain lessons learned about the technologies used today. Other topics include job simulation, displacement efficiency, and hydraulics. A practical guide for cementing engineer, Applied Well Cementing Engineering, gives a critical reference for better job execution. - Provides a practical guide and industry best practices for both new and seasoned engineers - Independent chapters enable the readers to quickly access specific subjects - Gain a complete framework of a cementing job with a detailed road map from casing equipment to plug and abandonment

With extraction out of depleted wells more important than ever, this new and developing technology is literally changing drilling engineering for future generations. Never before published in book form, these cutting-edge technologies and the processes that surround them are explained in easy-tounderstand language, complete with worked examples, problems and solutions. This volume is invaluable as a textbook for both the engineering student and the veteran engineer who needs to keep up with changing technology.

Lost Circulation: Mechanisms and Solutions provides the latest information on a long-existing problem for drilling and cementing engineers that can cause improper drilling conditions, safety risks, and annual losses of millions of wasted dollars for oil and gas companies. While several conferences have convened on the topic, this book is the first reliable reference to provide a well-rounded, unbiased approach on the fundamental causes of lost circulation, how to diagnose it in the well, and how to treat and prevent it in future well planning operations. As today's drilling operations become more complex, and include situations such as sub-salt formations, deepwater wells with losses caused by cooling, and more depleted reservoirs with reduced in-situ stresses, this book provides critical content on the current state of the industry that includes a breakdown of basics on stresses and fractures and how drilling fluids work in the wellbore. The book then covers the more practical issues caused by induced fractures, such as how to understand where the losses are occurring and how to use proven preventative measures such as wellbore strengthening and the effect of base fluid on lost circulation performance. Supported by realistic case studies, this book separates the many myths from the known facts, equipping today's drilling and cementing engineer with a go-to solution for every day well challenges. - Understand the processes, challenges and solutions involved in lost circulation, a critical problem in drilling - Gain a balance between fundamental understanding and practical application through real-world case studies - Succeed in solving lost circulation in today's operations such as wells involving casing drilling, deepwater, and managed pressure drilling

The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology