Expanded and updated, this practical guide is a one-stop design reference containing all an engineer needs when designing antennas Integrates state-of-the-art technologies with a special section for step-by-step antenna design Features up-to-date bio-safety and electromagnetic compatibility regulation compliance and latest standards Newly updated with MIMO antenna design, measurements and requirements Accessible to readers of many levels, from introductory to specialist Written by a practicing expert who has hired and trained numerous engineers

As wireless devices and systems get both smaller and more ubiquitous, the demand for effective but small antennas is rapidly increasing. Small Antenna Design describes the theory behind effective small antenna design and give design techniques and examples for small antennas for different operating frequencies. Design techniques are given for the entire radio spectrum, from a very hundred kilohertz to the gigahertz range.Unlike other antenna books which are heavily mathematical and theoretical, Douglas Miron keeps mathematics to the absolute minimum required to explain design techniques. Ground planes, essential for operation of many antenna designs, are extensively discussed. - Author's extensive experience as a practicing antenna design engineer gives book a strong "hands-on" emphasis - Covers antenna design techniques from very low frequency (below 300 kHz) to microwave (above 1 GHz) ranges - Special attention is given to antenna design for mobile/portable applications such as cell phones, WiFi, etc

Near-field communication (NFC) enables the exchange of information between close devices. The antenna is the indispensable element to transform an electronic device into an NFC system. For both theory and practice, this book presents in detail the design technologies of different antennas. They must meet the NFC ISO 18 092 and 21 481 standards as well as specifications by the NFC Forum for industrial applications, by EMVCo for banking applications and payments, and by CEN for public transport. In a particularly pedagogic way, Antenna Designs for NFC Devices enables designers of communicating object systems and the Internet of Things (IoT) to have access to the mysteries of the design of NFC antennas.

Offers a comprehensive and practical reference guide to antenna design and engineering for portable devices Antennas are often the most bulky components in many portable wireless devices such as mobile phones. Whilst the demand for ever smaller and more powerful wireless devices increases, as does the importance of designing and engineering smaller antennas to fit these devices. Antennas for Portable Devices provides a complete and cutting-edge guide to the design and engineering of small antennas for portable electronic devices such as mobile phone handsets, laptop computers, RFID (radio frequency identification), microwave thermal therapies devices, wearable devices, and UWB (ultra-wideband) based consumer devices. The book addresses practical engineering issues that antenna professionals have to deal with. It explains the immediate demands for existing systems; discusses the antenna technology for the latest and emerging applications, and gives comprehensive coverage of hot topics in the wireless industry. Issues including design considerations, engineering design, measurement setup and methodology, and practical applications are all covered in depth. Antennas for Portable Devices: Covers antennas for all modern portable wireless devices from handsets, RFID tags, laptops, wearable sensors, UWB-based wireless USB dongles and handheld microwave treatment devices Explains how to design and engineer applications for miniaturization of antenna technology, utilising practical case studies to provide the reader with an understanding of systems and design skills Links the basic antenna theory, with design methodology, and engineering design Is amply illustrated with numerous figures and data tables of antenna designs to aid understanding Features contributions from industry and research experts in antenna technology and applications This invaluable resource will provide a comprehensive overview of miniaturizing antenna technology for antenna engineers in industry, and R&D organizations, graduate students, consultants, researchers, RF professionals, technical managers, as well as practitioners working in the area of consumer electronics, RF systems, wireless communications, or bio-medical devices.

This book discusses antenna designs for handheld devices as well as base stations. The book serves as a reference and a handy guide for graduate students and PhD students involved in the field of millimeter wave antenna design. It also gives insights to designers and practicing engineers who are actively engaged in design of antennas for future 5G devices. It offers an in-depth study, performance analysis and extensive characterization of novel antennas for 5G applications. The reader will learn about basic design methodology and techniques to develop antennas for 5G applications including concepts of path loss compensation, co-design of commercial 4G antennas with millimeter wave 5G antennas and antennas used in phase array and pattern diversity modules. Practical examples included in the book will help readers to build high performance antennas for 5G subsystems/systems using low cost technology. Key Features Provides simple design methodology of different antennas for handheld devices as well as base stations for 5G applications. Concept of path loss compensation introduced. Co-design of commercial 4G antennas with millimetre wave 5G antennas presented. Comparison of phased array versus pattern diversity modules discussed in detail. Fabrication and Measurement challenges at mmWaves and Research Avenues in antenna designs for 5G and beyond presented. Shiban Kishen Koul is an emeritus professor at the Centre for Applied Research in Electronics at the Indian Institute of Technology Delhi. He served as the chairman of Astra Microwave Products Limited, Hyderabad from 2009-2018. He is a Life Fellow of the Institution of Electrical and Electronics Engineering (IEEE), USA, a Fellow of the Indian National Academy of Engineering (INAE), and a Fellow of the Institution of Electronics and Telecommunication Engineers (IETE). Karthikeya G S worked as an assistant professor in Visvesvaraya technological university from 2013 to 2016 and completed his PhD from the Centre for Applied Research in Electronics at the Indian Institute of Technology Delhi in Dec.2019. He is a member of IEEE-Antenna Propagation Society and Antenna Test and Measurement society.

This dissertation, "Mobile Device Antenna Design & Isolation Technologies" by Corbett Ray, Rowell, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Mobile device antenna design and isolation technologies are thoroughly investigated in this thesis. The antenna design parameters for mobile devices are quantified using practical restraints by analyzing almost 60 mobile handsets and the effect of materials, human tissue, manufacturing, and antenna type/placement on antenna design and then mapped into Wheeler-space that correlates the spherical wave modes with the antenna performance. The isolation technologies with mutual coupling anti-resonances are unified by a single performance parameter to distinguish them from the more traditional isolation technologies. This unifying performance parameter is the group delay between two antennas where high group delay indicates the presence of a bandstop filter in the form of either a PCB or an antenna modification. This thesis analyzes both PCB and antenna modifications with high group-delay and demonstrates these types of antennas can be placed in close proximity without affecting other performance parameters. It is also shown that both the PCB and antenna modifications contain two isolation methods where each isolation method is a mirror complement of the other method. Some antenna geometries can also increase the mutual coupling in order to improve the antenna performance using a phenomena called over-coupling. These over-coupled antenna systems can result in lower SAR for the cellular antennas and decreased array sizes for NFC/RFID/wireless-power antennas, resulting in better performance of antennas inside mobile devices. DOI: 10.5353/th_b5053389 Subjects: Antennas (Electronics) - Design and construction Mobile communication systems

This exciting new book focuses on the analysis and design of reconfigurable antennas for modern wireless communications, sensing, and radar. It presents the definitions of basic antenna parameters, an overview of RF switches and explains how to characterize their insertion loss, isolation, and power handling issues. Basic reconfigurable antenna building blocks, such as dipoles, monopoles, patches and slots are described, followed by presentations on frequency reconfigurable antennas, pattern reconfigurable antennas, and basic scanning antenna arrays. Switch biasing in an electromagnetic environment is discussed, as well as simulation strategies of reconfigurable antennas, and MIMO (Multiple Input Multiple Output) reconfigurable antennas. Performance characterization of reconfigurable antennas is also presented. The book provides information for the technical professional to design frequency reconfigurable, pattern reconfigurable, and MIMO antennas all relevant for modern wireless communication systems. Readers learn how to select switching devices, bias them properly, and understand their role in the overall reconfigurable antenna design. The book presents practical experimental implementation issues, including losses due to switches, materials, and EMI (Electromagnetic Interference) and shows how to address those.

This book provides current R&D trends and novel approaches in design and analysis of broadband, multiband, and smart antennas for 5G and B5G mobile and wireless applications, as well as the identification of integration techniques of these antennas in a diverse range of devices. The book presents theoretical and experimental approaches to help the reader in understanding the unique design issues and more advanced research. Moreover, the book includes chapters on the fundamentals of antenna theory. The book is pertinent to professionals and researchers working in the field of antenna engineering; it is written for graduate students, researchers, academics, and industry practitioners who want to improve their understanding in the current research trends in design analysis of broadband, multiband, and smart antennas for wireless applications.

This book highlights technology trends and challenges that trace the evolution of antenna design, starting from 3rd generation phones and moving towards the latest release of LTE-A. The authors explore how the simple monopole and whip antenna from the GSM years have evolved towards what we have today, an antenna design that is compact, multi-band in nature and caters to multiple elements on the same patch to provide high throughput connectivity. The scope of the book targets a broad range of subjects, including the microstrip antenna, PIFA antenna, and the monopole antenna to be used for different applications over three different mobile generations. Beyond that, the authors take a step into the future and look at antenna requirements for 5G communications, which already has the 5G drive in place with prominent scenarios and use-cases emerging. They examine these, and put in place the challenges that lie ahead for antenna design, particularly in mm-Wave design. The book provides a reference for practicing engineers and under/post graduate students working in this field.