Embedded computer systems are now everywhere: from alarm clocks to PDAs, from mobile phones to cars, almost all the devices we use are controlled by embedded computers. An important class of embedded computer systems is that of hard real-time systems, which have to fulfill strict timing requirements. As real-time systems become more complex, they are often implemented using distributed heterogeneous architectures. Analysis and Synthesis of Distributed Real-Time Embedded Systems addresses the design of real-time applications implemented using distributed heterogeneous architectures. The systems are heterogeneous not only in terms of hardware components, but also in terms of communication protocols and scheduling policies. Regarding this last aspect, time-driven and event-driven systems, as well as a combination of the two, are considered. Such systems are used in many application areas like automotive electronics, real-time multimedia, avionics, medical equipment, and factory systems. The proposed analysis and synthesis techniques derive optimized implementations that fulfill the imposed design constraints. An important part of the implementation process is the synthesis of the communication infrastructure, which has a significant impact on the overall system performance and cost. Analysis and Synthesis of Distributed Real-Time Embedded Systems considers the mapping and scheduling tasks within an incremental design process. To reduce the time-to-market of products, the design of real-time systems seldom starts from scratch. Typically, designers start from an already existing system, running certain applications, and the design problem is to implement new functionality on top of this system. Supporting such an incremental design process provides a high degree of flexibility, and can result in important reductions of design costs. STRONGAnalysis and Synthesis of Distributed Real-Time Embedded Systems will be of interest to advanced undergraduates, graduate students, researchers and designers involved in the field of embedded systems.

Embedded computer systems use both off-the-shelf microprocessors and application-specific integrated circuits (ASICs) to implement specialized system functions. Examples include the electronic systems inside laser printers, cellular phones, microwave ovens, and an automobile anti-lock brake controller. Embedded computing is unique because it is a co-design problem - the hardware engine and application software architecture must be designed simultaneously. Hardware-Software Co-Synthesis of Distributed Embedded Systems proposes new techniques such as fixed-point iterations, phase adjustment, and separation analysis to efficiently estimate tight bounds on the delay required for a set of multi-rate processes preemptively scheduled on a real-time reactive distributed system. Based on the delay bounds, a gradient-search co-synthesis algorithm with new techniques such as sensitivity analysis, priority prediction, and idle- processing elements elimination are developed to select the number and types of processing elements in a distributed engine, and determine the allocation and scheduling of processes to processing elements. New communication modeling is also presented to analyze communication delay under interaction of computation and communication, allocate interprocessor communication links, and schedule communication. Hardware-Software Co-Synthesis of Distributed Embedded Systems is the first book to describe techniques for the design of distributed embedded systems, which have arbitrary hardware and software topologies. The book will be of interest to: academic researchers for personal libraries and advanced-topics courses in co-design as well as industrial designers who are building high-performance, real-time embedded systems with multiple processors.

Ubiquitous in today's consumer-driven society, embedded systems use microprocessors that are hidden in our everyday products and designed to perform specific tasks. Effective use of these embedded systems requires engineers to be proficient in all phases of this effort, from planning, design, and analysis to manufacturing and marketing.Taking a sys

Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.

Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of complexity are not only controlled but increasingly even dominated by their embedded computer systems. Traditionally, such embedded control systems have been implemented in a monolithic, centralized way. Recently, distributed solutions are gaining increasing importance. In this approach, the control task is carried out by a number of controllers distributed over the entire system and connected by some interconnect network, like fieldbuses. Such a distributed embedded system may consist of a few controllers up to several hundred, as in today's top-range automobiles. Distribution and parallelism in embedded systems design increase the engineering challenges and require new development methods and tools. This book is the result of the International Workshop on Distributed and Parallel Embedded Systems (DIPES'98), organized by the International Federation for Information Processing (IFIP) Working Groups 10.3 (Concurrent Systems) and 10.5 (Design and Engineering of Electronic Systems). The workshop took place in October 1998 in Schloss Eringerfeld, near Paderborn, Germany, and the resulting book reflects the most recent points of view of experts from Brazil, Finland, France, Germany, Italy, Portugal, and the USA. The book is organized in six chapters: `Formalisms for Embedded System Design': IP-based system design and various approaches to multi-language formalisms. `Synthesis from Synchronous/Asynchronous Specification': Synthesis techniques based on Message Sequence Charts (MSC), StateCharts, and Predicate/Transition Nets. `Partitioning and Load-Balancing': Application in simulation models and target systems. `Verification and Validation': Formal techniques for precise verification and more pragmatic approaches to validation. `Design Environments' for distributed embedded systems and their impact on the industrial state of the art. `Object Oriented Approaches': Impact of OO-techniques on distributed embedded systems. £/LIST£ This volume will be essential reading for computer science researchers and application developers.

This book offers readers broad coverage of techniques to model, verify and validate the behavior and performance of complex distributed embedded systems. The authors attempt to bridge the gap between the three disciplines of model-based design, real-time analysis and model-driven development, for a better understanding of the ways in which new development flows can be constructed, going from system-level modeling to the correct and predictable generation of a distributed implementation, leveraging current and future research results.

This book constitutes the refereed proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, held in Paderborn, Germany, in June 2013. The 22 full revised papers presented together with 8 short papers were carefully reviewed and selected from 42 submissions. The papers have been organized in the following topical sections: design methodologies; non-functional aspects of embedded systems; verification; performance analysis; real-time systems; embedded system applications; and real-time aspects in distributed systems. The book also includes a special chapter dedicated to the BMBF funded ARAMIS project on Automotive, Railway and Avionics Multicore Systems.

Co-Synthesis of Hardware and Software for Digital Embedded Systems, with a Foreword written by Giovanni De Micheli, presents techniques that are useful in building complex embedded systems. These techniques provide a competitive advantage over purely hardware or software implementations of time-constrained embedded systems. Recent advances in chip-level synthesis have made it possible to synthesize application-specific circuits under strict timing constraints. This work advances the state of the art by formulating the problem of system synthesis using both application-specific as well as reprogrammable components, such as off-the-shelf processors. Timing constraints are used to determine what part of the system functionality must be delegated to dedicated application-specific hardware while the rest is delegated to software that runs on the processor. This co-synthesis of hardware and software from behavioral specifications makes it possible to realize real-time embedded systems using off-the-shelf parts and a relatively small amount of application-specific circuitry that can be mapped to semi-custom VLSI such as gate arrays. The ability to perform detailed analysis of timing performance provides the opportunity of improving the system definition by creating better phototypes. Co-Synthesis of Hardware and Software for Digital Embedded Systems is of interest to CAD researchers and developers who want to branch off into the expanding field of hardware/software co-design, as well as to digital system designers who are interested in the present power and limitations of CAD techniques and their likely evolution.