Advances in Ultra-low Emission Control Technologies for Coal-Fired Power Plants discusses the emissions standards of dust, SO2, NOx and mercury pollution, also presenting the key technologies available to control emissions in coal-fired power plants. The practical effects of ultra-low emissions projects included help the reader understand related implications in plants. Emphasis is placed on 300MW subcritical, 600MW subcritical, 660MW supercritical and 1000MW ultra-supercritical coal-fired units. The influence of different pollutant control units, such as wet electrostatic precipitator, desulfurization equipment and the electrostatic precipitator are also analyzed, and the pollutant levels before and after retrofitted ultra-low emissions are compared throughout. - Provides a unique analysis of advanced technologies, such as dust-removal, desulfurization and denitrification used for ultra-low emissions in coal-fired power plants - Introduces emission standards for dust, SO2, NOx and Mercury pollution from coal-fired power plants in China, the US and Europe - Provides solutions to reducing emissions based on technological advances in China - Analyzes the environmental and economic effects of these technologies

Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.

The U.S. Department of Energy (DOE) was given a mandate in the 1992 Energy Policy Act (EPACT) to pursue strategies in coal technology that promote a more competitive economy, a cleaner environment, and increased energy security. Coal evaluates DOE's performance and recommends priorities in updating its coal program and responding to EPACT. This volume provides a picture of likely future coal use and associated technology requirements through the year 2040. Based on near-, mid-, and long-term scenarios, the committee presents a framework for DOE to use in identifying R&D strategies and in making detailed assessments of specific programs. Coal offers an overview of coal-related programs and recent budget trends and explores principal issues in future U.S. and foreign coal use. The volume evaluates DOE Fossil Energy R&D programs in such key areas as electric power generation and conversion of coal to clean fuels. Coal will be important to energy policymakers, executives in the power industry and related trade associations, environmental organizations, and researchers.

The continued use of coal as a means of generating electricity and an increasing demand for cleaner, more efficient energy production has led to advances in power plant technology. Ultra-supercritical coal power plants reviews the engineering, operation, materials and performance of ultra-supercritical coal power plants.Following a chapter introducing advanced and ultra-supercritical coal power plants, part one goes on to explore the operating environments, materials and engineering of ultra-supercritical coal power plants. Chapters discuss the impacts of steam conditions on plant materials and operation, fuel considerations and burner design, and materials and design for boilers working under supercritical steam conditions. Chapters in part two focus on improving ultra-supercritical coal power plant performance and operability. Ash fouling, deposition and slagging in ultra-supercritical coal power plants are highlighted along with pollution control measures and the estimation, management and extension of the life of ultra-supercritical power plants. Further chapters provide an economic and engineering analysis of a 700°C advanced ultra-supercritical pulverised coal power plant and discuss CO2 capture-ready ultra-supercritical coal power plants.Ultra-supercritical coal power plants is a comprehensive technical reference for power plant operators and engineers, high-temperature materials scientists, professionals in the power industry who require an understanding of ultra-supercritical coal power plants and researchers and academics interested in the field. - Provides a comprehensive reference on the developments, materials, design and operation of ultra-supercritical power plant - Considers the degradation issues affecting this type of plant, as well as emissions control and CO2 capture technology; improved plant controls critical to improved operation and environmental performance - Contains operational assessments for plant safety, plant life management, and plant economics

Advanced Technologies for Solid, Liquid, and Gas Waste Treatment presents the potential of using advanced and emerging technologies to effectively treat waste. This book uniquely addresses treatment techniques for waste in all three phases, solid, liquid, and gas, with the goals of mitigating negative impacts of waste and producing valued-added products, such as biogas and fertilizer, as well as the use of artificial intelligence in the field. • Covers a wide range of advanced and emerging treatment technologies such as photocatalysis processing, adsorptive membranes, pyrolysis, advanced oxidation process, electrocoagulation, composting technologies, etc. • Addresses issues associated with wastes in different phases. • Discusses the pros and cons of treatment technologies for handling different wastes produced by different industrial processes, such as agricultural biomass, industrial/domestic solid wastes, wastewater, and hazardous gas. • Includes application of artificial intelligence in treatment of electronic waste. This book will appeal to chemical, civil, and environmental engineers working on waste treatment, waste valorization, and pollution control.

In October 2003, a group of experts met in Beijing under the auspices of the Chinese Academy of Sciences, Chinese Academy of Engineering, and National Academy of Engineering (NAE)/National Research Council (NRC) of the National Academies to continue a dialogue and eventually chart a rational course of energy use in China. This collection of papers is intended to introduce the reader to the complicated problems of urban air pollution and energy choices in China.

This book gathers the proceedings of the 9th International Symposium on Coal Combustion, held in Qingdao, China in July 2019. It provides the latest research results on techniques for pulverized coal combustion and fluidized bed combustion, low-carbon energy and emission controls, and industrial applications. Highlighting research areas that are of great importance in promoting collaboration between related subjects and the technical development of coal-related fields, the book offers a valuable reference guide for researchers and engineers alike.

Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. - Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants - Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades - Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels - Includes chapters on technologies for welding technologies