This book comprises the proceedings of the Conference and Exhibition on Non Destructive Evaluation, (NDE 2019). The contents of the book encompass a vast spectrum from Conventional to Advanced NDE including novel methods, instrumentation, sensors, procedures and data analytics as applied to all industry segments for quality control, periodic maintenance, life estimation, structural integrity and related areas. This book will be a useful reference for students, researchers and practitioners.

These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at University of San Diego, San Diego, CA, on July 27 to August 1, 1997. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the National Institute of Standards and Technology, the Federal Aviation Administration, and the National Science Foundation IndustrylUniversity Cooperative Research Centers. This year's Review of Progress in QNDE was attended by approximately 370 participants from the US and many foreign countries who presented a total of approximately 350 papers. As usual, the meeting was divided into 36 sessions with four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications and inspection systems, and methods of inspection science from acoustics to x-rays. The Review continues to experience some fluctuations in size, mostly under pressure from a decrease in funding for NDE research at the US Federal level, but increased participation from foreign laboratories has more than made up the difference. The Review is ideally sized to permit a full-scale overview of the latest developments in a collegial atmosphere that most participants favor. The opening plenary session this year concentrated on advances in imaging technologies and methodologies that have been made in recent years. Dr. K.

Electromagnetic Non-destructive Evaluation (ENDE) is an invaluable, non-invasive diagnostic tool for the inspection, testing, evaluation and characterization of materials and structures. It has now become indispensible in a number of diverse fields ranging from biomedics to many branches of industry and engineering. This book presents the proceedings of the 24th International Workshop on Electromagnetic Nondestructive Evaluation, held in Chengdu, China from 11 - 14 September 2019. The 38 peer-reviewed and extended contributions included here were selected from 45 original submissions, and are divided into 7 sections: eddy current testing and evaluation; advanced sensors; analytical and numerical modeling; material characterization; inverse problem and signal processing; artificial intelligence in ENDE; and industrial applications of ENDE. The papers cover recent studies concerning the progress and application of electromagnetic (EM) fields in the non-destructive examination of materials and structures, and topics covered include evaluations at a micro-structural level, such as correlating the magnetic properties of a material with its grain structure, and a macroscopic level, such as techniques and applications for EM NDT&E. Recent developments and emerging materials such as advanced EM sensors, multi-physics NDT&E, intelligent data management and maintaining the integrity of structures are also explored. The book provides a current overview of developments in ENDE, and will be of interest to all those working in the field.

Non-Destructive Evaluation (NDE) is now playing an increasing role in our modern global economy; in security sensitive industries, for instance. The complexity of the inspection task and either large or limited lot runs now require more operator-assisted or fully- automated signal processing. This book deals with both fields of expertise: NDE and signal processing. On the signal processing side, in the particular context of NDE applications, the following topics are discussed: sensor fusion, signal knowledge representation, artificial intelligence, fuzzy logic, computer vision, integration of numeric and non-numeric informations, parallel decomposition, noise processing and calibration of sensor devices as well as reliability of detection. Some hardware considerations are introduced as well, to discuss platforms on which processing is done. On the NDE side, applications include advances in holographic interferometry, microwave resonance or shearography and also on more traditional NDE techniques such as ultrasonics, infrared techniques, X-ray, computed tomography, Eddy currents. Inverse problems are also discussed. This book is required reading for those who already have some experience in one or both fields (signal processing and/or NDE).

The use of electromagnetic nondestructive evaluation has grown significantly in recent years. This valuable technique enables the assessment of objects by observing the electromagnetic response to electric currents and/or magnetic fields introduced within them. This book presents the proceedings of the 23rd International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2018), held in Detroit, Michigan, USA, from 9 - 13 September 2018. The workshop provides an international forum for the exchange of information on state-of-the-art technologies and development in electromagnetic nondestructive evaluation, and the 19 papers presented here cover topics including sensors; modeling; signal processing; inverse problems; materials state awareness and characterization; damage diagnosis and prognosis; biomedical applications; and innovative industrial applications of eNDE. Providing a comprehensive overview of current theoretical and applied research into electromagnetic nondestructive evaluation (eNDE) methods, the book will be of interest to all those whose work involves the non-destructive evaluation of objects, whatever their field.

Using a systems level approach, this book employs aspects of linear systems theory and wave propagation and scattering theory to develop a comprehensive model of an entire ultrasonic measurement system. This integrated approach leads to a new model-based engineering technology for designing, using and optimizing ultrasonic nondestructive evaluation inspections. In addition, the book incorporates MATLAB examples and exercises.

This volume illustrates significant changes in optical, magnetic, ultrasonic, mechanical and biological nondestructive evaluation techniques for online automatic control of food quality evaluation, including X-ray tomography. It presents advances in computer vision, X-ray imaging, ultrasonics, biosensors, and data analysis.

Electromagnetic Nondestructive Evaluation (ENDE) is a technique crucial to a great many engineering activities, as well as to environmental evaluation and protection issues. It is a discipline recognized for its theoretical insight, efficient models and simulations, robust data interpretation, and accurate instrumentation. This book presents contributions from the 22nd ENDE International Workshop, held in Saclay, France, in September 2017. It includes 1 of the 3 keynotes and 34 peer-reviewed and extended versions of the 47 oral contributions delivered during the workshop. Topics covered include static to THz electromagnetic; smart models and high-performance computations; advanced sensors; adaptive databases; model selection and the qualification of uncertainty; multi-sensor data fusion; the monitoring and diagnosis of mechanical structures; and innovative industrial applications. The book will be of interest to all those whose work involves the development or use of electromagnetic non-destructive evaluation.

The adequate assessment of key apparatus conditions is a hot topic in all branches of industry. Various online and offline diagnostic methods are widely applied to provide early detections of any abnormality in exploitation. Furthermore, different sensors may also be applied to capture selected physical quantities that may be used to indicate the type of potential fault. The essential steps of the signal analysis regarding the technical condition assessment process may be listed as: signal measurement (using relevant sensors), processing, modelling, and classification. In the Special Issue entitled "Advances in Sensors and Sensing for Technical Condition Assessment and NDT", we present the latest research in various areas of technology.