This title discusses a broad range of issues related to the use of computed tomography in geomaterials and geomechanics. The contributions cover a wide range of topics, including deformation and strain localization in soils, rocks and sediments; fracture and damage assessment in rocks, asphalt and concrete; transport in porous media; oil and gas exploration and production; neutron tomography and other novel experimental and analytical techniques; image-based computational modeling; and software and visualization tools. As such, this will be valuable reading for anyone interested in the application of computed tomography to geomaterials from both fundamental and applied perspectives.

This book brings together a total of 48 contributions (including 5 keynote papers) which were presented at the 2nd International Workshop on the Application of X-ray CT for Geomaterials (GeoX 2006) held in Aussois, France, on 4-7 October, 2006. The contributions cover a wide range of topics, from fundamental characterization of material behavior to applications in geotechnical and geoenvironmental engineering. Recent advances of X-ray technology, hardware and software are also discussed. As such, this will be valuable reading for anyone interested in the application of X-ray CT to geomaterials from both fundamental and applied perspectives.

X-ray computed tomography (CT) is a technique that allows non-destructive imaging and quantification of internal features of objects. X-ray CT reveals differences in density and atomic composition and can therefore be used for the study of porosity, the relative distribution of contrasting solid phases and the penetration of injected solutions. In this book, various applications of X-ray CT in the geosciences are illustrated by papers covering a wide range of disciplines, including petrology, soil science, petroleum geology, geomechanics and sedimentology.

Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.

The book presents a collection of 25 original papers (including one review paper) on state-of-the art achievements in the theory and practice of crystals plasticity. The articles cover a wide scope of research on materials behavior subjected to external loadings, starting from atomic-scale simulations, and a new methodological aspect, to experiments on a structure and mechanical response upon a large-scale processing. Thus, a presented contribution of researchers from 18 different countries can be virtually divided into three groups, namely (i) “modelling and simulation”; (ii) “methodological aspects”; and (iii) “experiments on process/structure/properties relationship”. Furthermore, a large variety of materials are investigated including more conventional (steels, copper, titanium, nickel, aluminum, and magnesium alloys) and advanced ones (composites or high entropy alloys). The book should be interested for senior students, researchers and engineers working within discipline of materials science and solid state physics of crystalline materials.

X-ray Computed Tomography (CT) scanning has been widely used for medical diagnosis. This technique is now attracting increasing interest as a tool in non-destructive testing in engineering. This book reports the early results of research into this application, with particular reference to deformation and failure of geomaterials. Presenting papers of the International Workshop on X-CT for Geomaterials at Kumamoto, Japan in 2003. The book is intended for researchers and professionals in the fields of geotechnical engineering, soil, rock and concrete engineering, and geology.

Fluid flow in transforming porous rocks, fracture networks, and granular media is a very active interdisciplinary research subject in Physics, Earth Sciences, and Engineering. Examples of natural and engineered processes include hydrocarbon recovery, carbon dioxide geo-sequestration, soil drying and wetting, pollution remediation, soil liquefaction, landslides, dynamics of wet or dry granular media, dynamics of faulting or friction, volcanic eruptions, gas venting in sediments, karst development and speleogenesis, ore deposit development, and radioactive waste disposal. Hydrodynamic flow instabilities and pore scale disorder typically result in complex flow patterning. In transforming media, additional mechanisms come into play: compaction, de-compaction, erosion, segregation, and fracturing lead to changes in permeability over time. Dissolution, precipitation, and chemical reactions between solutes and solids may gradually alter the composition and structure of the solid matrix, either creating or destroying permeable paths for fluid flow. A complex, dynamic feedback thus arises where, on the one hand, the fluid flow affects the characteristics of the porous medium, and on the other hand the changing medium influences the fluid flow. This Research Topic Ebook presents current research illustrating the depth and breadth of ongoing work in the field of flow and transformation in porous media through 15 papers by 72 authors from around the world. The body of work highlights the challenges posed by the vast range of length- and time-scales over which subsurface flow processes occur. Importantly, phenomena from each scale contribute to the larger-scale behavior. The flow of oil and gas in reservoirs, and the flow of groundwater on catchment scale is sensitively linked to pore scale processes and material heterogeneity down to the micrometer scale. The geological features of the same reservoirs and catchments evolved over millions of years, sometimes as a consequence of cracking and fracture growth occurring on the time scale of microseconds. The research presented by the authors of this Research Topic represents a step toward bridging the separation of scales as well as the separation of scientific disciplines so that a more unified picture of flow and transformation in porous media can start to emerge.

In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 6th International Symposium on Deformation Characteristics of Geomaterials, the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM), as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy provided a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 6th International Symposium on Deformation Characteristics of Geomaterials. As well as 118 articles selected for publication after peer review, it includes 7 lectures delivered by invited keynote speakers and the Third Bishop Lecture, delivered by Professor Herve Di Benedetto of the University of Lyon, France, who presented a reference work on the advanced testing and modeling of bituminous bounded and unbounded granular materials. The conference brought together practitioners, researchers and educators from around the world engaged in the understanding of the deformation properties of geo-materials before failure, and the small strain parameters as fundamental characteristics of geo-materials. The main topics covered by the symposium include experimental investigations from very small strains to beyond failure, including multi-physical approach; HTC M coupling behavior, characterization and modeling of various geo-materials and interfaces; and practical prediction and interpretation of ground responses: field observation and case histories.

This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.