I express my sincere gratitude to NATO Science Committee for granting me the financial award to organize and direct the Advanced Research Workshop on "MULTILAYERED and FIBRE-REINFORCED COMPOSITES: PROBLEMS AND PROSPECTS" that was held in Kiev, Ukraine, during the period of June 2 - 6, 1997, in collaboration with Professor S. A. Firstov of the Frantsevich Institute for Problems of Materials Science, National Academy of Sciences, Kiev, Ukraine. In this context I wish to convey special thanks to Dr. J. A. Raussell-Colom, NATO Programme Director for Priority Area on High Technology, for his kind efforts and continuous guidance in the course of organizing the Workshop. I appreciate sincerely the opportunity of working closely with Professor Firstov and acknowledge with deep gratitude his outstanding contribution in co-directing the Workshop. I wish to express my special thanks to Dr. N. Orlovskaya of the Frantsevich Institute, for her outstanding contribution towards both the organization and conduct of the Workshop. I wish to convey my sincere thanks to Professor V. V. Skorohord, Deputy Director of the Frantsevich Institute, on behalf of the same Institute, for hosting the Workshop and welcoming the participants to l{iev. The very kind efforts of the members of the Scientific Advisory Committee, the Local Organizing Committee and the Staff of the Frantsevich Institute towards the organization and conduct of the Workshop, are gratefully appreciated. I convey my full indebtedness to all researchers who participated in the Workshop.

This monograph consists of two volumes and provides a unified, comprehensive presentation of the important topics pertaining to the understanding and determination of the mechanical behaviour of engineering materials under different regimes of loading. The large subject area is separated into eighteen chapters and four appendices, all self-contained, which give a complete picture and allow a thorough understanding of the current status and future direction of individual topics. Volume I contains eight chapters and three appendices, and concerns itself with the basic concepts pertaining to the entire monograph, together with the response behaviour of engineering materials under static and quasi-static loading. Thus, Volume I is dedicated to the introduction, the basic concepts and principles of the mechanical response of engineering materials, together with the relevant analysis of elastic, elastic-plastic, and viscoelastic behaviour. Volume II consists of ten chapters and one appendix, and concerns itself with the mechanical behaviour of various classes of materials under dynamic loading, together with the effects of local and microstructural phenomena on the response behaviour of the material. Volume II also contains selected topics concerning intelligent material systems, and pattern recognition and classification methodology for the characterization of material response states. The monograph contains a large number of illustrations, numerical examples and solved problems. The majority of chapters also contain a large number of review problems to challenge the reader. The monograph can be used as a textbook in science and engineering, for third and fourth undergraduate levels, as well as for the graduate levels. It is also a definitive reference work for scientists and engineers involved in the production, processing and applications of engineering materials, as well as for other professionals who are involved in the engineering design process.

This monograph consists of two volumes and provides a unified, comprehensive presentation of the important topics pertaining to the understanding and determination of the mechanical behaviour of engineering materials under different regimes of loading. The large subject area is separated into eighteen chapters and four appendices, all self-contained, which give a complete picture and allow a thorough understanding of the current status and future direction of individual topics. Volume I contains eight chapters and three appendices, and concerns itself with the basic concepts pertaining to the entire monograph, together with the response behaviour of engineering materials under static and quasi-static loading. Thus, Volume I is dedicated to the introduction, the basic concepts and principles of the mechanical response of engineering materials, together with the relevant analysis of elastic, elastic-plastic, and viscoelastic behaviour. Volume II consists of ten chapters and one appendix, and concerns itself with the mechanical behaviour of various classes of materials under dynamic loading, together with the effects of local and microstructural phenomena on the response behaviour of the material. Volume II also contains selected topics concerning intelligent material systems, and pattern recognition and classification methodology for the characterization of material response states. The monograph contains a large number of illustrations, numerical examples and solved problems. The majority of chapters also contain a large number of review problems to challenge the reader. The monograph can be used as a textbook in science and engineering, for third and fourth undergraduate levels, as well as for the graduate levels. It is also a definitive reference work for scientists and engineers involved in the production, processing and applications of engineering materials, as well as for other professionals who are involved in the engineering design process.

In the fall of 1998, Prof. Sergey Firstov invited me to the Frantcevych Institute for Problems of Materials Science (IPMS) in Kyiv, Ukraine to discuss possible collaborations in the area of advanced metals research. During this visit, a strong mutual interest was evident in a broad range of structural metals technologies, and a quick friendship was established. Countless subsequent emails and a reciprocal visit to the U. S Air Force Research Laboratory by Prof. Firstov and a team of scientists from IPMS ensued to discuss and detail a broad collaboration in the area of structural metals. Two years after the initial visit, a major investment by the U. S. Air Force Office of Scientific Research (AFOSR) was established to pursue the technologies defined by these interactions. The annual reviews of the AFOSR Ukrainian Metals Initiative were held in late May, a most beautiful time in Kyiv when the lilacs are in bright display and the air is scented with the smell of falling blossoms from the chestnut trees that line the major streets and many parks. The sunny days and mild evenings provide a welcome break from winter, and on weekend evenings festive crowds spill onto the Khreshchatyk, Kyiv’s downtown boulevard, to listen to street musicians, watch jugglers and comedians, or simply to celebrate with friends. The annual reviews featured long days of intensive discussion of technical progress, followed in the evenings by the warm hospitality of the Ukrainian hosts.

This collection of cutting-edge papers, written by leading authors in honor of Professor Jacob Aboudi, covers a wide spectrum of topics in the field, presents both theoretical and experimental approaches, and suggests directions for possible future research.

Nanostructured films and coatings possess unique properties due to both size and interface effects. They find many applications in areas such as electronics, catalysis, protection, data storage, optics and sensors. The focus of the present book is on synthesis and processing; advanced characterization techniques; properties (including mechanical, chemical, electronic, thermal, catalytic, and magnetic); modelling of interlayer and intralayer interfaces; and applications.

The marine environment presents significant challenges for materials due to the potential for corrosion by salt water, extreme pressures when deeply submerged and high stresses arising from variable weather. Well-designed fibre-reinforced composites can perform effectively in the marine environment and are lightweight alternatives to metal components and more durable than wood. Marine Applications of Advanced Fibre-Reinforced Composites examines the technology, application and environmental considerations in choosing a fibre-reinforced composite system for use in marine structures. This book is divided into two parts. The chapters in Part One explore the manufacture, mechanical behavior and structural performance of marine composites, and also look at the testing of these composites and end of life environmental considerations. The chapters in Part Two then investigate the applications of marine composites, specifically for renewable energy devices, offshore oil and gas applications, rigging and sails. Underwater repair of marine composites is also reviewed. - Comprehensively examines all aspects of fibre-reinforced marine composites, including the latest advances in design, manufacturing methods and performance - Assesses the environmental impacts of using fibre-reinforced composites in marine environments, including end of life considerations - Reviews advanced fibre-reinforced composites for renewable energy devices, rigging, sail textiles, sail shape optimisation and offshore oil and gas applications

A world list of books in the English language.

Damping in Fiber Reinforced Composite Materials starts with an introduction to the basic concepts of damping in composite materials. Methods of modeling damping are then covered, along with recent developments in measuring techniques, both local, like polar scanning and global techniques like the Resonalyser method (based on measuring modal damping ratios of composite material plates). The effect of other factors, such as stress, strain-level, stiffness and frequency that need to be considered when determining damping behavior in composite materials are also discussed in detail. Other chapters present a parametric study of a two-phase composite material using different micromechanical models such as Unified micromechanics, and Hashin and Eshelby's to predict elastic moduli and loss factors. A bridging model that incorporates the effect of fiber packaging factors is then compared to FEM results. Final sections cover the effect of the interphase on the mechanical properties of the composite, present a nonlinear model for the prediction of damping in viscoelastic materials, and provide practical examples of damping and principles of vibration control. - Introduces the basics of damping and dynamic analysis in composite materials - Explains damping mechanisms in fiber reinforced composites and modeling principles - Covers recent developments in measuring techniques for the identification of damping in composite materials - Explains the use of a dynamic mechanical analyzer for predicting damping in composite materials - Contains micromechanical studies, modeling of two and three-phase composites, and modeling of non-linear damping - Includes experimental results that validate micromechanical models