Heat Transfer topics are commonly of a very complex nature. Often different mechanisms like heat conduction, convection, thermal radiation, and non-linear phenomena, such as temperature-dependent thermophysical properties, and phase changes occur simultaneously. New developments in numerical solution methods of partial differential equations and access to high-speed, efficient and cheap computers have led to dramatic advances during recent years. This book publishes papers from the Ninth International Conference on Advanced Computational Methods and Experimental Measurements in Heat and Mass Transfer, exploring new approaches to the numerical solutions of heat and mass transfer problems and their experimental measurement. Papers encompass a number of topics such as: Diffusion and Convection; Conduction; Natural and Forced Convection; Heat and Mass Transfer Interaction; Casting, Welding, Forging and other Processes; Heat Exchanges; Atmospheric Studies; Advances in Computational Methods; Modelling and Experiments; Micro and Nano Scale Heat and Mass Transfer; Energy Systems; Energy Balance Studies; Thermal Material Characterization; Applications in Biology; Applications in Ecological Buildings; Case Studies.

In engineering design and development, reliable and accurate computational methods are requested to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements have been achieved during recent years due to improved numerical solutions of non-linear partial differential equations and computer developments to achieve efficient and rapid calculations. Nevertheless, to further progress in computational methods will require developments in theoretical and predictive procedures – both basic and innovative – and in applied research. Accurate experimental investigations are needed to validate the numerical calculations. This book contains the edited versions of the papers presented at the Tenth International Conference on Advanced Computational Methods and Experimental Measurements in Heat Transfer and Mass Transfer held in Maribor, Slovenia in July 2008. The objective of this conference series is to provide a forum for presentation and discussion of advanced topics, new approaches and application of advanced computational methods and experimental measurements to heat and mass transfer problems. The contributed papers are grouped in the following appropriate sections to provide better access for readers: Natural and forced convection; Heat exchangers; Advances in computational methods; Heat recovery; Heat transfer; Modelling and experiments.

.".. Eleventh International Conference on Advanced Computational Methods and Experimental Measurements in Heat Transfer and Mass Transfer held in Tallinn, Estonia in 2010"--Pref.

Heat Transfer is important in food processing. This edited book presents a review of ongoing activities in a broad perspective.

Containing papers presented at the twelfth in a series of successful international conferences on Advanced Computational Methods and Experiments in Heat Transfer, this book covers the latest developments in this important field. Heat Transfer plays a major role in emerging application fields such as sustainable development and the reduction of greenhouse gases, as well as micro- and nano-scale structures and bio-engineering. Typical applications include heat exchangers, gas turbine cooling, turbulent combustion and fires, electronics cooling, melting and solidification. The nature of heat transfer problems is complex, involving many different simultaneously occurring mechanisms (e.g., heat conduction, convection, turbulence, thermal radiation. phase change). Their complexity makes it imperative that we develop reliable and accurate computational methods to replace or complement expensive and time-consuming experimental trial and error work. Tremendous advances have been achieved during recent years due to improved numerical solutions of non-linear partial differential equations and more powerful computers capable of performing efficient and rapid calculations. Nevertheless, to further progress, it will also be necessary to develop theoretical and predictive computational procedures--both basic and innovative--and in applied research. Accurate experimental investigations are needed to validate the numerical calculations. The book includes such topics as: Heat Transfer in Energy Producing Devices; Heat Transfer Enhancement; Heat Transfer Problems; Natural and Forced Convection and Radiation; Multiphase Flow Heat Transfer; Modelling and Experiments.

Plate-and-frame heat exchangers (PHEs) are used in many different processes at a broad range of temperatures and with a variety of substances. Research into PHEs has increased considerably in recent years and this is a compilation of knowledge on the subject. Containing invited contributions from prominent and active investigators in the area, it should enable graduate students, researchers, and research and development engineers in industry to achieve a better understanding of transport processes. Some guidelines for design and development are also included.

This new edition updated the material by expanding coverage of certain topics, adding new examples and problems, removing outdated material, and adding a computer disk, which will be included with each book. Professor Jaluria and Torrance have structured a text addressing both finite difference and finite element methods, comparing a number of applicable methods.

"This book provides, in a single source, information on the use of methods based on the numerical/computational analysis in food technology. It covers the whole spectrum and applications from food preservation to food analysis and describes specific methods for baking, crystallization, and drying of cereals, fruits, and vegetables"--

The objective of this book is to describe techniques to investigate the behaviour of electric fields and induced currents in the human body exposed to different scenarios of extremely low frequency (ELF) high voltage - low current electromagnetic fields by means of numerical modelling with improved Boundary Element Methods (BEM).A variety of three dimensional anatomically shaped human body models under different exposure conditions are presented and solved.The mathematical formulation for the case of human exposure to ELF electromagnetic fields departing from Maxwell equations and for the electrical properties of biological tissue is provided.The underpinning ideas of the Boundary Element Method applied to ELF fields in the human body are presented.A literature survey including electrical properties of tissues relevant to low frequency calculations has been compiled and included in one chapter.A novel improved BEM approach is introduced in order to solve this type of problems leading to more accurate results and more efficient calculations.The developed methodology is applied to three different case studies: i- overhead power transmission lines, ii- power substation rooms, and iii- pregnant woman including foetus and evolving scenarios.In all the cases, a sensitivity analysis investigating the influence of varying geometrical and electrical properties of the tissues has been conducted.The results obtained allow to identify situations of high and low exposure in the different parts of the body and to compare with existing exposure guidelines.

This volume consists of the papers presented at the 5th Asia-Pacific Drying Conference, held 13-15 August, 2007 China. The articles feature the most recent progress of drying R&D in the Asia-Pacific region. The proceedings is useful for graduate students, researchers and professionals in the field of drying research and development.