As users, we require more and more reliable and longer operation of electronic devices. Most often, the efforts of scientists and engineers related to energy management, energy conversion, and energy storage are overlooked. The PowerMEMS slogan in its meaning hides the science of materials enabling the construction of modern accumulators and batteries, so important for the developing consumer electronics and electromobility; energy harvesters used wherever conventional power sources cannot be used; and finally the methods and algorithms of energy processing and management that increase the efficiency of the devices they operate. This Special Issue contains six research papers selected from those presented at the 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS 2019), as and representative of all papers presented during the Conference.

Materials for energy conversion Mechanical energy harvesting and actuation Thermal and chemical science and technologies for power, propulsion, and cooling Direct thermal energy harvesting Electron, ion, photon and radiation energy conversion Biochemical and bio inspired power energy systems Electrical energy harvesting, management, storage and transfer Applications and Innovations in micro energy systems

Carbon forms a variety of allotropes due to the diverse hybridization of s- and p-electron orbitals, including the time-honored graphite and diamond as well as new forms such as C60 fullerene, nanotubes, graphene, and carbyne. The new family of carbon isotopes—fullerene, nanotubes, graphene, and carbyne—is called “nanostructured carbon” or “nanocarbon.” These isotopes exhibit extreme properties such as ultrahigh mechanical strength, ultrahigh charge–carrier mobility, and high thermal conductivity, attracting considerable attention for their electronic and mechanical applications as well as for exploring new physics and chemistry in the field of basic materials science. Electron sources are important in a wide range of areas, from basic physics and scientific instruments to medical and industrial applications. Carbon nanotubes (CNTs) and graphene behave as excellent electron-field emitters owing to their exceptional properties and offer several benefits compared to traditional cathodes. Field emission (FE) produces very intense electron currents from a small surface area with a narrow energy spread, providing a highly coherent electron beam—a combination that not only provides us with the brightest electron sources but also explores a new field of electron beam–related research. This book presents the enthusiastic research and development of CNT-based FE devices and focuses on the fundamental aspects of FE from nanocarbon materials, including CNTs and graphene, and the latest research findings related to it. It discusses applications of FE to X-ray and UV generation and reviews electron sources in vacuum electronic devices and space thrusters. Finally, it reports on the new forms of carbon produced via FE from CNT.

This book presents inductive and hybrid levitation micro-systems and their applications in micro-sensors and –actuators. It proposes and discusses analytical and quasi-finite element techniques for modeling levitation micro-systems based on the Lagrangian formalism. In particular, micro-bearings, -actuators, -accelerators and –accelerometers based on inductive levitation are comprehensively described with accompanying experimental measurements.

This book is a printed edition of the Special Issue "Micromanipulation" that was published in Actuators

Ambient intelligence is the vision of a technology that will become invisibly embedded in our natural surroundings, present whenever we need it, enabled by simple and effortless interactions, attuned to all our senses, adaptive to users and context-sensitive, and autonomous. High-quality information access and personalized content must be available to everybody, anywhere, and at any time. This book addresses ambient intelligence used to support human contacts and accompany an individual's path through the complicated modern world. From the technical standpoint, distributed electronic intelligence is addressed as hardware vanishing into the background. Devices used for ambient intelligence are small, low-power, low weight, and (very importantly) low-cost; they collaborate or interact with each other; and they are redundant and error-tolerant. This means that the failure of one device will not cause failure of the whole system. Since wired connections often do not exist, radio methods will play an important role for data transfer. This book addresses various aspects of ambient intelligence, from applications that are imminent since they use essentially existing technologies, to ambitious ideas whose realization is still far away, due to major unsolved technical challenges.

The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Micro manufacturing involves dealing with the fabrication of structures in the size range of 0.1 to 1000 µm. The scope of nano manufacturing extends the size range of manufactured features to even smaller length scales—below 100 nm. A strict borderline between micro and nano manufacturing can hardly be drawn, such that both domains are treated as complementary and mutually beneficial within a closely interconnected scientific community. Both micro and nano manufacturing can be considered as important enablers for high-end products. This Special Issue of Applied Sciences is dedicated to recent advances in research and development within the field of micro and nano manufacturing. The included papers report recent findings and advances in manufacturing technologies for producing products with micro and nano scale features and structures as well as applications underpinned by the advances in these technologies.

This book is a printed edition of the Special Issue "Micro/Nano Manufacturing" that was published in Micromachines