A complete introduction to x-ray microscopy, covering optics, 3D and chemical imaging, lensless imaging, radiation damage, and applications.

Three-dimensional x-ray diffraction (3DXRD) microscopy is a novel experimental method for structural characterisation of polycrystalline materials. The position, morphology, phase, strain and crystallographic orientation of hundreds of grains or sub-grain embedded within mm-cm thick specimens can be determined simultaneously. Furthermore, the dynamics of the individual structural elements can be monitored during typical processes such as deformation or annealing. The book gives a comprehensive account of the methodology followed by a summary of selected applications. The method is presented from a mathematical/crystallographic point-of-view but with sufficient hands-on details to enable the reader to plan his or her own experiments. The scope of applications includes work in materials science and engineering, geophysics, geology, chemistry and pharmaceutical science.

This book has evolved by processes of selection and expansion from its predecessor, Practical Scanning Electron Microscopy (PSEM), published by Plenum Press in 1975. The interaction of the authors with students at the Short Course on Scanning Electron Microscopy and X-Ray Microanalysis held annually at Lehigh University has helped greatly in developing this textbook. The material has been chosen to provide a student with a general introduction to the techniques of scanning electron microscopy and x-ray microanalysis suitable for application in such fields as biology, geology, solid state physics, and materials science. Following the format of PSEM, this book gives the student a basic knowledge of (1) the user-controlled functions of the electron optics of the scanning electron microscope and electron microprobe, (2) the characteristics of electron-beam-sample inter actions, (3) image formation and interpretation, (4) x-ray spectrometry, and (5) quantitative x-ray microanalysis. Each of these topics has been updated and in most cases expanded over the material presented in PSEM in order to give the reader sufficient coverage to understand these topics and apply the information in the laboratory. Throughout the text, we have attempted to emphasize practical aspects of the techniques, describing those instru ment parameters which the microscopist can and must manipulate to obtain optimum information from the specimen. Certain areas in particular have been expanded in response to their increasing importance in the SEM field. Thus energy-dispersive x-ray spectrometry, which has undergone a tremendous surge in growth, is treated in substantial detail.

This volume is based on papers presented at the International Symposium on X-Ray Microscopy held at Brookhaven National Laboratory, Upton NY, August 31-September 4, 1987. Previous recent symposia on the sub ject were held in New York in 1979, Gottingen in 1983 and Taipei in 1986. Developments in x-ray microscopy continue at a rapid pace, with im portant advances in all major areas: x-ray sources, optics and components, and microscopes and imaging systems. Taken as a whole, the work pre sented here emphasizes three major directions: (a) improvements in the capability and image-quality of x-ray microscopy, expressed principally in systems attached to large, high-brightness x-ray sources; (b) greater access to x-ray microscopy, expressed chiefly in systems employing small, often pulsed, x-ray sources; and (c) increased rate of exploration of applications of x-ray microscopy. The number of papers presented at the symposium has roughly dou bled compared with that of its predecessors. While we are delighted at this growth as a manifestation of vitality and rapid growth of the field, we did have to ask the authors to limit the length of their papers and to submit them in camera-ready form. We thank the authors for their con tributions and for their efforts in adhering to the guidelines on manuscript preparation.

The growth of interest and research activity in X -ray microscopy is reflected in the increasing size and scope of a related series of international conferences, the latest of which (XRM90) was held at King's College London (3-7 September 1990) with over 130 delegates. Previous conferences in Gottingen and Brookhaven resulted in books in the Springer Series in Optical Sciences, and this volume, the proceedings of XRM90, maintains this tradition. Because of the large number of papers their lengths were strictly limited and, while most papers can be directly identified with conference presentations, in a few cases those on similar topics by the same authors have been combined into a longer paper to allow better use of the space. The book is divided into six parts, with Parts IT-VI covering the major areas of interest at the conference. In Part 1 are two overviews; Ron Burge presented the opening paper of the conference, while the closing, summary, contrlbution by Janos Kirz is included here as a comprehensive introduction to the remainder of the book. Part IT covers developments in X -ray sources and optics. The high average brightnesses of synchrotron radiation sources have made many applications pos sible, while the more convenient, laboratory-based, plasma sources offer much promise for the future. Several contributions report significant advances in X-ray optics, which must clearly continue fully to exploit the latest sources.

This book has its origins in the intensive short courses on scanning elec tron microscopy and x-ray microanalysis which have been taught annually at Lehigh University since 1972. In order to provide a textbook containing the materials presented in the original course, the lecturers collaborated to write the book Practical Scanning Electron Microscopy (PSEM), which was published by Plenum Press in 1975. The course con tinued to evolve and expand in the ensuing years, until the volume of material to be covered necessitated the development of separate intro ductory and advanced courses. In 1981 the lecturers undertook the project of rewriting the original textbook, producing the volume Scan ning Electron Microscopy and X-Ray Microanalysis (SEMXM). This vol ume contained substantial expansions of the treatment of such basic material as electron optics, image formation, energy-dispersive x-ray spectrometry, and qualitative and quantitative analysis. At the same time, a number of chapters, which had been included in the PSEM vol ume, including those on magnetic contrast and electron channeling con trast, had to be dropped for reasons of space. Moreover, these topics had naturally evolved into the basis of the advanced course. In addition, the evolution of the SEM and microanalysis fields had resulted in the devel opment of new topics, such as digital image processing, which by their nature became topics in the advanced course.

This book explains concepts of transmission electron microscopy (TEM) and x-ray diffractometry (XRD) that are important for the characterization of materials. The fourth edition adds important new techniques of TEM such as electron tomography, nanobeam diffraction, and geometric phase analysis. A new chapter on neutron scattering completes the trio of x-ray, electron and neutron diffraction. All chapters were updated and revised for clarity. The book explains the fundamentals of how waves and wavefunctions interact with atoms in solids, and the similarities and differences of using x-rays, electrons, or neutrons for diffraction measurements. Diffraction effects of crystalline order, defects, and disorder in materials are explained in detail. Both practical and theoretical issues are covered. The book can be used in an introductory-level or advanced-level course, since sections are identified by difficulty. Each chapter includes a set of problems to illustrate principles, and the extensive Appendix includes laboratory exercises.

This open access book gives a complete and comprehensive introduction to the fields of medical imaging systems, as designed for a broad range of applications. The authors of the book first explain the foundations of system theory and image processing, before highlighting several modalities in a dedicated chapter. The initial focus is on modalities that are closely related to traditional camera systems such as endoscopy and microscopy. This is followed by more complex image formation processes: magnetic resonance imaging, X-ray projection imaging, computed tomography, X-ray phase-contrast imaging, nuclear imaging, ultrasound, and optical coherence tomography.

Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ? ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ? ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images.