This report provides state-of-the-practice guidelines for the computation of wind-induced forces on industrial facilities with structural features outside the scope of current codes and standards.

This report represents the state-of-the-practice for wind load design at industrial facilities and is aimed at engineers familiar with design of industrial type structures.

Prepared by theØTask Committee on Wind-Induced Forces and Task Committee on Anchor Bolt Design of the Petrochemical Committee of the Energy Division of ASCE. This report presents state-of-the-practice set of guidelines for the determination of wind-induced forces and the design of anchor bolts for petrochemical facilities. Current codes and standards do not address many of the structures found in the petrochemical industry. As a result, engineers and petrochemical companies have independently developed procedures and techniques for handling engineering issues such as the twoØcontained in this report. A lack of standardization in the industry has led to inconsistent structural reliability, however. This volume is intended for structural design engineers familiar with design of industrial-type structures.

"This report offers practical recommendations regarding the design and safety of new and existing petrochemical facilities during and following an earthquake"--

Wind forces from extreme wind events are the dominant loading for many parts of the world, exacerbated by climate change and the continued construction of tall buildings and structures. This authoritative source, for practising and academic structural engineers and graduate students, ties the principles of wind loads on structures to the relevant aspects of meteorology, bluff-body aerodynamics, probability and statistics, and structural dynamics. This new edition covers: Climate change effects on extreme winds – particularly those from tropical cyclones, hurricanes and typhoons Modelling of potential wind vulnerability and damage Developments in extreme value probability analysis of extreme wind speeds and directions Explanation of the difference between ‘return period’ and ‘average recurrence interval’, as well as ‘bootstrapping’ techniques for deriving confidence limits Wind over water, and profiles and turbulence in non-synoptic winds An expanded chapter on internal pressures produced by wind for various opening and permeability scenarios Aerodynamic shaping of high- and low-rise buildings Recent developments in five major wind codes and standards A new chapter on computational fluid dynamics (CFD), as applied to wind engineering A greatly expanded appendix providing the basic information on extreme wind climates for over 140 countries and territories Additional examples for many chapters in this book

Standard ASCE/SEI 7-22 provides requirements for general structural design and includes means for determining various loads and their combinations, which are suitable for inclusion in building codes and other documents.

Topics include design and evaluation philosophy, seismic hazards such as ground shaking, fault rupture, and tsunamis, analysis and load definition, primary structural design criteria and considerations, walkdown evaluations of existing facilities, design and evaluation of tanks at grade, and retrofit design and procedures for seismically deficit structures.

This updated edition provides general guidelines for the structural design of blast-resistant petrochemical facilities. Information is provided for U.S. Occupational Safety and Health Administration (OSHA) requirements, design objectives, siting considerations, and load determination, and references cite sources of detailed information. Detailed coverage is provided for types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures. Typical details and ancillary considerations, such as doors and windows, are also included. A how-to discussion on the upgrade of existing buildings is provided for older facilities which may not meet current needs. Three example calculations are included to illustrate design procedures.