Oil and gas engineers today use three main factors in deciding drilling fluids: cost, performance, and environmental impact, making water-based products a much more attractive option. Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids effectively delivers all the background and infrastructure needed for an oil and gas engineer to utilize more water-based products that benefit the whole spectrum of the well's life cycle. Helping to mitigate critical well issues such as formation damage, fluid loss control, and borehole repair, more operators demand to know the full selection of water-based products available to consistently keep a peak well performance. This must-have training guide provides the necessary coverage in the area, broken down by type and use, along with an extensive list of supportive materials such as a chemical index of structural formulas and helpful list of references for further reading. In addition to understanding the types, special additives, and chemical compatibilities of the products available, the reader will also learn proper waste disposal techniques, including management of produced water, a component mandatory to hydraulic fracturing operations. Concise and comprehensive, Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids details all the necessary educational content and handy references to elevate your well's performance while lowering your environmental impact. - Understand the basics and functions on all water-based fluids for drilling, completion, cementing, and enhanced oil recovery operations - Get up to date with the growing need for water-based fluids in hydraulic fracturing operations including supportive materials such as an index of trade names, acronyms, and chemicals - Stay responsible and know the environmental aspects and current regulations, including disposal and discharge

The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal

Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index

Fluid Chemistry, Drilling and Completion, the latest release in the Oil and Gas Chemistry Management series that covers all sectors of oil and gas chemicals (from drilling to production, processing, storage and transportation), delivers critical chemical oilfield basics while also covering the latest research developments and practical solutions. Organized by type of chemical, the book allows engineers to fully understand how to effectively control chemistry issues, make sound decisions, and mitigate challenges. Sections cover downhole sampling, crude oil characterization, such as fingerprinting properties, data interpretation, chemicals specific to fluid loss control, and matrix stimulation chemicals. Supported by a list of contributing experts from both academia and industry, the book provides a necessary reference that bridges petroleum chemistry operations from theory, to safer, cost-effective applications. - Offers a full range of oil field chemistry issues, including chapters focusing on unconventional reservoirs and water management - Helps users gain effective control on problems - Includes mitigation strategies from an industry list of experts and contributors - Delivers both up-to-date research developments and practical applications, bridging between theory and practice

Petroleum Engineer's Guide to Oil Field Chemicals and Fluids, Third Edition delivers all the necessary lists of chemicals by use, their basic components, benefits and environmental implications. Instead of searching through various sources, this updated reference presents a one-stop, non-commercialized approach by organizing products by function, matching the chemical to the process for practical problem-solving, and extending coverage with additional resources and supportive materials. Updates include shale specific fluids and organic additives, including swellable polymers and multi-walled carbon nanotubes. Covering the full spectrum, including fluid loss additives and oil spill treating agents, this book is ideal for every oil and gas operation with its options for lower costs, sustainable use and enhanced production. - Helps readers effectively locate and utilize the right chemical application specific to their oil and gas operation - Includes updated sections on shale specific fluids, defoamers and organic additives, including biodegradable waste and swellable polymers - Covers environmental factors and risks for oil field chemicals, along with the pluses and minuses of each application

Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Petroleum engineers continue to need cost saving and environmentally sustainable products and methods for today's hydraulic fracturing operations. Hydraulic Fracturing Chemicals and Fluid Technology, Second Edition, continues to deliver an easy-to-use manual of fluid formulations to meet specific job needs. Enhanced with more environmental aspects, this reference helps engineers and fluid specialists select and use the appropriate chemicals for any hydraulic fracturing job. New information concerning nanotechnology applications such as wellbore sealant and proppants are added to enhance operations in a sustainable manner while saving on production costs. Other updates include low recovery of fracturing water in shale, surfactants for waterless hydraulic fracturing, and expanded produced water treatment. Rounding out with updated references and patents for easy reference, Hydraulic Fracturing Chemicals and Fluid Technology, Second Edition, gives engineers a critical guide on selecting better products to boost productions while strengthening environmental enhancement and consideration. - Gain insight with new information surrounding environmental contamination and produced water treatment methods - Save on production costs with new nanoparticle-enhanced fluids and applications - Eliminate guesswork with systematic approach to fluid technology organized by project need

Guide to Practical Use of Chemicals in Refineries and Pipelines delivers a well-rounded collection of content, references, and patents to show all the practical chemical choices available for refinery and pipeline usage, along with their purposes, benefits, and general characteristics. Covering the full spectrum of downstream operations, this reference solves the many problems that engineers and managers currently face, including corrosion, leakage in pipelines, and pretreatment of heavy oil feedstocks, something that is of growing interest with today's unconventional activity. Additional coverage on special refinery additives and justification on why they react the way they do with other chemicals and feedstocks is included, along with a reference list of acronyms and an index of chemicals that will give engineers and managers the opportunity to recognize new chemical solutions that can be used in the downstream industry. - Presents tactics practitioners can use to effectively locate and utilize the right chemical application specific to their refinery or pipeline operation - Includes information on how to safely perform operations with coverage on environmental issues and safety, including waste stream treatment and sulfur removal - Helps readers understand the composition and applications of chemicals used in oil and gas refineries and pipelines, along with where they should be applied, and how their structure interacts when mixed at the refinery

When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. - Pinpoints the specific compounds used in any given fracturing operation - Provides a systematic approach to classifying fracturing fluid technology to meet specific project needs - Eliminates guesswork with easy-to-understand language on selection and components of hydraulic fracturing chemicals - Addresses environmental aspects of chemicals to safeguard employees and protect the environment

Equipment and Components in the Oil and Gas Industry Volume 1: Equipment provides an overview of the equipment used in the oil and gas industry, as well as various stages of the oil and gas industry, including geology, exploration, drilling, transportation, and refining. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. The equipment used in the oil and gas industry is wide ranging, from drilling equipment and wellhead equipment, such as casings, tubing, and wellhead Christmas trees, to equipment for the transportation of fluids and gases, such as pumps and compressors. The book presents a simplified method to choose the correct equipment for each task, as well as covering the selection of heat exchangers and storage tanks. Finally, this book covers turbines, motors, and other prime movers, alongside a flare system for disposing of unwanted or waste gases in oil and gas refineries and petrochemical plants. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.