Amidst tightening requirements for eliminating CFC's, HCFC's, halons, and HFC's from use in air conditioning and heat pumps, the search began for replacements that are environmentally benign, non-flammable, and similar to the banned refrigerants in system-level behavior. Although refrigerant mixtures have long been used in commercial products to improve environmental impact, there are few resources available that address the use of fluid mixtures in vapor compression systems. Vapor Compression Heat Pumps with Refrigerant Mixtures provides a comprehensive background and thorough discussion of the thermodynamics of working fluid mixtures and their applications. It covers the fundamentals of various refrigeration cycles as well as a basic background in the thermodynamics related to these mixtures. It also provides important data on heat transfer and pressure drop correlations as well as critical operational issues related to refrigerant mixtures.

This book discusses conventional as well as unconventional wood drying technologies. It covers fundamental thermophysical and energetic aspects and integrates two complex thermodynamic systems, conventional kilns and heat pumps, aimed at improving the energy performance of dryers and the final quality of dried lumber. It discusses advanced components, kiln energy requirements, modeling, and software and emphasizes dryer/heat pump optimum coupling, control, and energy efficiency. Problems are included in most chapters as practical, numerical examples for process and system/components calculation and design. The book presents promising advancements and R&D challenges and future requirements.

Heat Recovery with Commercial, Institutional, and Industrial Heat Pumps presents the basic concepts and thermodynamic behavior of mechanical vapor compression and recompression. It covers both ammonia water absorption and compression/resorption heat pumps. Including theoretical and practical approaches, the book features numerous solved exercises based on real thermodynamic and climatic parameters and case studies with takeaways from on-site experiences to help the reader better identify the advantages and limitations of each heat pumping technology. The book discusses future implementations of heat recovery heat pump technologies that are among the most energy-efficient and environmentally friendly techniques. This book will interest graduate students studying HVAC, thermal systems, and heat pumps. It will also benefit professionals working with heat pumps, industrial process engineers, manufacturers, and research and design personnel.

It has long been recognized that realizing the potential for energy conservation and diversification by using heat pumps offers considerable benefits to the environment. Important work on more efficient and ozone-friendly working fluids will further enhance the case for greater support of heat pump research. This book contains the Proceedings of the Third International Energy Agency Conference held in Tokyo in March 1990. The main theme of the Conference, 'Heat Pumps - Solving Energy and Environmental Challenges', is explained in great depth, covering not only technical characteristics but economic factors and the role of government and other bodies in promoting research, and the uses of all types of heat pumps are also fully considered. As well as publishing the papers presented at the meeting, the book also contains the extensive complementary poster sessions from the Conference.

As the chemical process industry is among the most energy demanding sectors, chemical engineers are endeavoring to contribute towards sustainable future. Due to the limitation of fossil fuels, the need for energy independence, as well as the environmental problem of the greenhouse gas effect, there is a large increasing interest in the research and development of chemical processes that require less capital investment and reduced operating costs and lead to high eco-efficiency. The use of heat pumps is a hot topic due to many advantages, such as low energy requirements as well as an increasing number of industrial applications. Therefore, in the current book, authors are focusing on use of heat pumps in the chemical industry, providing an overview of heat pump technology as applied in the chemical process industry, covering both theoretical and practical aspects: working principle, applied thermodynamics, theoretical background, numerical examples and case studies, as well as practical applications. The worked-out examples have been included to instruct students, engineers and process designers about how to design various heat pumps used in the industry. Reader friendly resources namely relevant equations, diagrams, figures and references that reflect the current and upcoming heat pump technologies, will be of great help to all readers from the chemical and petrochemical industry, biorefineries and other related areas.

Drying of solids is one of the most common, complex, and energy-intensive industrial processes. Conventional dryers offer limited opportunities to increase energy efficiency. Heat pump dryers are more energy and cost effective, as they can recycle drying thermal energy and reduce CO2, particulate, and VOC emissions due to drying. This book provides an introduction to the technology and current best practices and aims to increase the successful industrial implementation of heat pump- assisted dryers. It enables the reader to engage confidently with the technology and provides a wealth of information on theories, current practices, and future directions of the technology. It emphasizes several new design concepts and operating and control strategies, which can be applied to improve the economic and environmental efficiency of the drying process. It answers questions about risks, advantages vs. disadvantages, and impediments and offers solutions to current problems. Discusses heat pump technology in general and its present and future challenges. Describes interesting and promising innovations in drying food, agricultural, and wood products with various heat pump technologies. Treats several technical aspects, from modeling and simulation of drying processes to industrial applications. Emphasizes new design concepts and operating and control strategies to improve the efficiency of the drying process.

The definitive text/reference for students, researchers and practicing engineers This book provides comprehensive coverage on refrigeration systems and applications, ranging from the fundamental principles of thermodynamics to food cooling applications for a wide range of sectoral utilizations. Energy and exergy analyses as well as performance assessments through energy and exergy efficiencies and energetic and exergetic coefficients of performance are explored, and numerous analysis techniques, models, correlations and procedures are introduced with examples and case studies. There are specific sections allocated to environmental impact assessment and sustainable development studies. Also featured are discussions of important recent developments in the field, including those stemming from the author’s pioneering research. Refrigeration is a uniquely positioned multi-disciplinary field encompassing mechanical, chemical, industrial and food engineering, as well as chemistry. Its wide-ranging applications mean that the industry plays a key role in national and international economies. And it continues to be an area of active research, much of it focusing on making the technology as environmentally friendly and sustainable as possible without compromising cost efficiency and effectiveness. This substantially updated and revised edition of the classic text/reference now features two new chapters devoted to renewable-energy-based integrated refrigeration systems and environmental impact/sustainability assessment. All examples and chapter-end problems have been updated as have conversion factors and the thermophysical properties of an array of materials. Provides a solid foundation in the fundamental principles and the practical applications of refrigeration technologies Examines fundamental aspects of thermodynamics, refrigerants, as well as energy and exergy analyses and energy and exergy based performance assessment criteria and approaches Introduces environmental impact assessment methods and sustainability evaluation of refrigeration systems and applications Covers basic and advanced (and hence integrated) refrigeration cycles and systems, as well as a range of novel applications Discusses crucial industrial, technical and operational problems, as well as new performance improvement techniques and tools for better design and analysis Features clear explanations, numerous chapter-end problems and worked-out examples Refrigeration Systems and Applications, Third Edition is an indispensable working resource for researchers and practitioners in the areas of Refrigeration and Air Conditioning. It is also an ideal textbook for graduate and senior undergraduate students in mechanical, chemical, biochemical, industrial and food engineering disciplines.