This book presents selected articles from the International Conference on Asian and Pacific Coasts (APAC 2019), an event intended to promote academic and technical exchange on coastal related studies, including coastal engineering and coastal environmental problems, among Asian and Pacific countries/regions. APAC is jointly supported by the Chinese Ocean Engineering Society (COES), the Coastal Engineering Committee of the Japan Society of Civil Engineers (JSCE), and the Korean Society of Coastal and Ocean Engineers (KSCOE). APAC is jointly supported by the Chinese Ocean Engineering Society (COES), the Coastal Engineering Committee of the Japan Society of Civil Engineers (JSCE), and the Korean Society of Coastal and Ocean Engineers (KSCOE).

This paper describes the impacts of potential hydropower retrofits on downstream flow distributions at Lock and Dam No. 8 on the upper Mississippi River. The model used solves the complete Reynolds equations for two-dimensional free-surface flow in the horizontal plane using a finite element solution scheme. RMA-2 has been in continuing use and development at the Hydrologic Engineering Center and elsewhere for the past decade. Although designed primarily for the simulation of hydraulic conditions, RMA-2 may be used in conjunction with related numerical models to simulate sediment transport and water quality. In this study, velocity distributions were evaluated with regard to environmental, navigational and small-boat safety considerations. Aquatic habitat was defined by depth, substrate type and current velocity. Habitat types were quantified by measuring the areas between calculated contours of velocity magnitude (isotachs) for existing and project conditions. The capability for computing and displaying isotachs for the depth-average velocity, velocity one foot from the bottom and near the water surface was developed for this study. The product of this study effort is an application of the RMA-2 model that allows prediction of structural aquatic habitat in hydraulicaly complex locations. Elements of the instream flow group methodology could be incorporated to provide detailed predictions of impacts to habitat quality. Calibration of the numerical model to field measurements of velocity magnitude and direction is also described.

A two-dimensional horizontal finite element numerical model (RMA-2) was applied to a 15 mile (24 km) river channel-floodplain reach in West Germany. Previous applications of such models have been restricted to much smaller scales. The results indicate that finite element schemes may successfully estimate river stage in large scale floodplain applications. Computed stage hydrographs compared well with observed data using loss coefficients within expected ranges. Two-dimensional flow models have been applied to certain classes of river channel problems. Applications have included detailed analyses of flow patterns near structures such as bridges and floodplains. In all these problems the scale of interest has been small, e.g. reaches of river a few river widths long. Many estuary studies have been done that were of large scale; some of these utilized a hybrid (numerical plus physical) modeling technique. In a review of the application of finite element methods to river channels, Samuels reported that the river channel was resolved separately from the floodplain in only two studies. Missing in previous work is attention to large scale floodplain modeling. The work reported in this paper focuses on the feasibility and accuracy of applying a two-dimensional flow model to a large floodplain. Traditional floodplain studies have used semi-empirical flow routing with steady, one-dimensional computation of water surface elevations to define inundated areas. Keywords: Army Corps of Engines. (kr).

Following years of research, the first bored tunnel in soft soil in the Netherlands, the Tweede Heinenoord tunnel, was completed in 1998. Since then, Dutch engineers have increased their knowledge of soft soil tunnelling, with a significant and important part of this research being carried out by GeoDelft, the Dutch National Institute of Geo-Engineering. This book contains the most important publications by GeoDelft on the subject of soft soil tunnelling, focusing on the period from 1992 to the present, it is divided into four main headings: field measurements; grout behaviour; model testing; and numerical analysis. This impressive overview of the progress made in the Netherlands in soft soil tunnelling research over more than a decade is a valuable resource to those working in soft soil tunnelling worldwide.

This book builds inviscid flow analysis from an undergraduate-level treatment of potential flow to the level required for research. The tools covered in this book allow the reader to develop physics-based mathematical models for a variety of flows, including attached and separated flows past wings, fins, and blades of various shapes undergoing arbitrary motions. The book covers all of the ingredients of these models: the solution of potential flows about arbitrary body shapes in two- and three-dimensional contexts, with a particular focus on conformal mapping in the plane; the decomposition of the flow into contributions from ambient vorticity and body motion; generalized edge conditions, of which the Kutta condition is a special case; and the calculation of force and moment, with extensive treatments of added mass and the influence of fluid vorticity. The book also contains an extensive primer with all of the necessary mathematical tools. The concepts are demonstrated on several example problems, both classical and modern.