Tribology of Reciprocating Engines documents the proceedings of the 9th Leeds-Lyon Symposium on Tribology held at the University of Leeds, England on September 7-10, 1982. This book emphasizes advances in the working principals of the tribological components that operate with relative motion. The topics discussed include the dynamic analysis of engine bearing systems, measurement of oil film thickness in diesel motor main bearings, and temperature variations in crankshaft bearings. The theoretical and experimental study of ring-liner friction, tribology in the cylinders of reciprocating compressors, and lubricant properties in the diesel engine piston ring zone are also described. This text likewise considers the metallurgy of scoring and scuffing failure, impact of oil contamination on wear and energy losses, and role of tappet surface morphology and metallurgy in cam/tappet life. This compilation is a good reference for triblogists, lubrication engineers, and specialists researching on reciprocating engines.

Customer expectations and international competition are obliging car and commercial vehicle manufacturers to produce more efficient and cleaner products in shorter product cycle times. The consideration of Engine Tribology has a leading role to play in helping to achieve these goals. Specific areas of interdisciplinary interest include: design influences on fuel economy and emissions; new materials (ceramics, steels, coatings, lubricants, additives); low viscosity lubricants; and low heat rejection (adiabatic) engines.This volume gives a detailed and current review on some basic features of tribology particularly associated with internal combustion engines such as: lubrication analysis relevant to plain bearings, Hertzian contact theory and elastohydrodynamic lubrication associated with cams and followers and friction and wear in a general context. Several chapters examine engine bearings, valve trains, (cams and followers) and piston assemblies. For each machine element a background introduction is followed by design interpretations and a consideration of future developments. The important topic of materials, solids and lubricants is focused upon in the concluding chapters.The work will be of interest to engineers and researchers in the automobile, automotive products, petroleum and associated industries.

Tribology, the science of friction, wear and lubrication, is one of the cornerstones of engineering's quest for efficiency and conservation of resources. Tribology and dynamics of engine and powertrain: fundamentals, applications and future trends provides an authoritative and comprehensive overview of the disciplines of dynamics and tribology using a multi-physics and multi-scale approach to improve automotive engine and powertrain technology.Part one reviews the fundamental aspects of the physics of motion, particularly the multi-body approach to multi-physics, multi-scale problem solving in tribology. Fundamental issues in tribology are then described in detail,from surface phenomena in thin-film tribology, to impact dynamics, fluid film and elastohydrodynamic lubrication means of measurement and evaluation. These chapters provide an understanding of the theoretical foundation for Part II which includes many aspects of the physics of motion at a multitude of interaction scales from large displacement dynamics to noise and vibration tribology, all of which affect engines and powertrains. Many chapters are contributed by well-established practitioners disseminating their valuable knowledge and expertise on specific engine and powertrain sub-systems. These include overviews of engine and powertrain issues, engine bearings, piston systems, valve trains, transmission and many aspects of drivetrain systems. The final part of the book considers the emerging areas of microengines and gears as well as nano-scale surface engineering.With its distinguished editor and international team of academic and industry contributors, Tribology and dynamics of engine and powertrain is a standard work for automotive engineers and all those researching NVH and tribological issues in engineering. - Reviews fundamental aspects of physics in motion, specifically the multi-body approach to multi physics - Describes essential issues in tribology from surface phenomena in thin film tribology to impact dynamics - Examines specific engine and powertrain sub-systems including engine bearings, piston systems and value trains

This book presents a comprehensive study of all important aspects of tribology. It covers issues and their remedies adopted by researchers working on automobile systems. The book is broadly divided in to three sections, viz. (i) new materials for automotive applications, (ii) new lubricants for automotive applications, and (iii) impact of surface morphologies for automotive applications. The rationale for this division is to provide a comprehensive and categorical review of the developments in automotive tribology. The book covers tribological aspects of engines, and also discusses influence of new materials, such as natural fibers, metal foam materials, natural fiber reinforced polymer composites, carbon fiber/silicon nitride polymer composites and aluminium matrix composites. The book also looks at grease lubrication, effectiveness and sustainability of solid/liquid additives in lubrication, and usage of biolubricants. In the last section the book focuses on brake pad materials, shot peening method, surface texturing, magnetic rheological fluid for smart automobile brake and clutch systems, and application of tribology in automobile systems. This book will be of interest to students, researchers, and professionals from the automotive industry.

Summarizes the analysis and design of today’s gas heat engine cycles This book offers readers comprehensive coverage of heat engine cycles. From ideal (theoretical) cycles to practical cycles and real cycles, it gradually increases in degree of complexity so that newcomers can learn and advance at a logical pace, and so instructors can tailor their courses toward each class level. To facilitate the transition from one type of cycle to another, it offers readers additional material covering fundamental engineering science principles in mechanics, fluid mechanics, thermodynamics, and thermochemistry. Fundamentals of Heat Engines: Reciprocating and Gas Turbine Internal-Combustion Engines begins with a review of some fundamental principles of engineering science, before covering a wide range of topics on thermochemistry. It next discusses theoretical aspects of the reciprocating piston engine, starting with simple air-standard cycles, followed by theoretical cycles of forced induction engines, and ending with more realistic cycles that can be used to predict engine performance as a first approximation. Lastly, the book looks at gas turbines and covers cycles with gradually increasing complexity to end with realistic engine design-point and off-design calculations methods. Covers two main heat engines in one single reference Teaches heat engine fundamentals as well as advanced topics Includes comprehensive thermodynamic and thermochemistry data Offers customizable content to suit beginner or advanced undergraduate courses and entry-level postgraduate studies in automotive, mechanical, and aerospace degrees Provides representative problems at the end of most chapters, along with a detailed example of piston-engine design-point calculations Features case studies of design-point calculations of gas turbine engines in two chapters Fundamentals of Heat Engines can be adopted for mechanical, aerospace, and automotive engineering courses at different levels and will also benefit engineering professionals in those fields and beyond.

Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings — journal bearings, thrust bearings and externally pressurised bearings — are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons.The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions.This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.

Integrating very interesting results from the most important R & D project ever made in Germany, this book offers a basic understanding of tribological systems and the latest developments in reduction of wear and energy consumption by tribological measures. This ready reference and handbook provides an analysis of the most important tribosystems using modern test equipment in laboratories and test fields, the latest results in material selection and wear protection by special coatings and surface engineering, as well as with lubrication and lubricants. This result is a quick introduction for mechanical engineers and laboratory technicians who have to monitor and evaluate lubricants, as well as for plant maintenance personnel, engineers and chemists in the automotive and transportation industries and in all fields of mechanical manufacturing industries, researchers in the field of mechanical engineering, chemistry and material sciences.

Tribology is an unfamiliar term for many, but is experienced by all. It is the science of friction, wear and lubrication of contacting surfaces in relative motion. The aim of this book is to introduce the fundamentals of tribology as well as its challenges in extreme operating conditions. The book comprises a historical background and an introduction to familiarize both undergraduate and postgraduate readers with such an important topic. It addresses a comprehensive coverage of classical tribology of solid contacts, friction mechanics, wear mechanisms and lubrication technologies. The tribology of polymer composites, MEMS and NEMS are explored. In addition, tribology of automotive components is presented, as are tribological applications in many practical situations.Various test methods used in evaluating wear are reviewed. Diverse techniques applied in predicting wear behavior by mathematical models, FE modeling and ANN approach are discussed. The book reviews key features of extraordinary conditions associated with, but not limited to, harsh environments, severe sliding and poor lubrication challenges. A basic understanding of failure modes in tribological systems is covered. The state-of-the-art research on tribology under these extreme conditions is extensively discussed, which will be of interest to researchers. The book highlights solutions for extreme tribology problems and provides an overview of various factors affecting tribosystems in harsh conditions.

Topics addressed at the April 1991 conference held in Stratford-upon- Avon, UK, and sponsored by the Tribology Group of the Institute of Physics (UK), include adhesion, boundary lubrication, friction, fluid film lubrication, surface analysis, lubricant additives, and other physical aspects, with particular focus on underlying mechanisms. No index. Annotation copyrighted by Book News, Inc., Portland, OR

This handbook is a useful aid for anyone working to achieve more effective lubrication, better control of friction and wear, and a better understanding of the complex field of tribology. Developed in cooperation with the Society of Tribologists and Lubrication Engineers and containing contributions from 74 experts in the field, the Tribology Data Handbook covers properties of materials, lubricant viscosities, and design, friction and wear formulae. The broad scope of this handbook includes military, industrial and automotive lubricant specifications; evolving areas of friction and wear; performance and design considerations for machine elements, computer storage units, and metal working; and more. Important guidelines for the monitoring, maintenance, and failure assessment of lubrication in automotive, industrial, and aircraft equipment are also included. Current environmental and toxicological concerns complete this one-stop reference. With hundreds of figures, tables, and equations, as well as essential background information explaining the information presented, this is the only source you need to find virtually any tribology information.