This book provides a working knowledge of the modeling and engineering applications of shape memory alloys (SMAs), beginning with a rigorous introduction to continuum mechanics and continuum thermodynamics as they relate to the development of SMA modeling.Modern SMAs can recover from large amounts of bending and deformation, and millions of repetitions within recoverable ranges. SMAs are used in the medical industry to create stents, in the dental industry to create dental and orthodontic archwires, and in the aerospace industry to create fluid fittings. The text presents a unified approach to the constitutive modeling of SMAs, including modeling of magnetic and high temperature SMAs.

This monograph consists of two volumes and provides a unified, comprehensive presentation of the important topics pertaining to the understanding and determination of the mechanical behaviour of engineering materials under different regimes of loading. The large subject area is separated into eighteen chapters and four appendices, all self-contained, which give a complete picture and allow a thorough understanding of the current status and future direction of individual topics. Volume I contains eight chapters and three appendices, and concerns itself with the basic concepts pertaining to the entire monograph, together with the response behaviour of engineering materials under static and quasi-static loading. Thus, Volume I is dedicated to the introduction, the basic concepts and principles of the mechanical response of engineering materials, together with the relevant analysis of elastic, elastic-plastic, and viscoelastic behaviour. Volume II consists of ten chapters and one appendix, and concerns itself with the mechanical behaviour of various classes of materials under dynamic loading, together with the effects of local and microstructural phenomena on the response behaviour of the material. Volume II also contains selected topics concerning intelligent material systems, and pattern recognition and classification methodology for the characterization of material response states. The monograph contains a large number of illustrations, numerical examples and solved problems. The majority of chapters also contain a large number of review problems to challenge the reader. The monograph can be used as a textbook in science and engineering, for third and fourth undergraduate levels, as well as for the graduate levels. It is also a definitive reference work for scientists and engineers involved in the production, processing and applications of engineering materials, as well as for other professionals who are involved in the engineering design process.

Reprinted from Archive for Rational Mechanics and Analysis edited by C. Truesdell

Research in the past thirty years on the foundations of thermodynamics has led not only to a better understanding of the early developments of the subject but also to formulations of the First and Second Laws that permit both a rigorous analysis of the consequences of these laws and a substantial broadening of the class of systems to which the laws can fruitfully be applied. Moreover, modem formulations of the laws of thermodynamics have now achieved logically parallel forms at a level accessible to under graduate students in science and engineering who have completed the standard calculus sequence and who wish to understand the role which mathematics can play in scientific inquiry. My goal in writing this book is to make some of the modem develop ments in thermodyamics available to readers with the background and orientation just mentioned and to present this material in the form of a text suitable for a one-semester junior-level course. Most of this presentation is taken from notes that I assembled while teaching such a course on two occasions. I found that, aside from a brief review of line integrals and exact differentials in two dimensions and a short discussion of infima and suprema of sets of real numbers, juniors (and even some mature sophomores) had sufficient mathematical background to handle the subject matter. Many of the students whom I taught had very limited experience with formal and rigorous mathematical exposition.

In this book, Samohýl and Pekař offer a consistent and general non-equilibrium thermodynamic description for a model of chemically reacting mixtures. This type of model is frequently encountered in practice and up until now, chemically reacting systems (out of equilibrium) have rarely been described in books on non-equilibrium thermodynamics. Readers of this book benefit from the systematic development of the theory; this starts with general principles, going through the applications to single component fluid systems, and finishing with the theory of mixtures, including chemical reactions. The authors describe the simplest mixture model – the linear fluid – and highlight many practical and thermodynamically consistent equations for describing transport properties and reaction kinetics for this model. Further on in the book, the authors also describe more complex models. Samohýl and Pekař take special care to clearly explain all methodology and starting axioms and they also describe in detail applied assumptions and simplifications. This book is suitable for graduate students in chemistry, materials science and chemical engineering as well as professionals working in these and related areas.

The International Symposium on Shape Memory Effects and Appli cations was held at the University of Toronto on May 19-20, 1975, in four sessions over two days, as part of the regular 1975 Spring Meeting of The Metallurgical Society of AlME, sponsored by the Physical Metallurgy Committee of The Metallurgical Society. This was the first symposium on the subject, the only previous meeting at all related being the 1968 NOL Symposium on TiNi and Associated Compounds. One of the major intentions of this Symposium was to provide a forum for cross-communication between workers in the diverse metallurgical areas pertinent to shape memory effects, areas such as martensitic transformation, crystallography and thermodynamics, mechanical behavior, stress-induced transformation, lattice sta bility, and alloy development. Authors were encouraged to place an emphasis on delineation of general controlling factors and mech anisms, and on comparison of shape memory effect alloy systems with systems not exhibiting SME.

This text aims to enable the experience accumulated by engineers and the research community in materials science, continuum mechanics and applied mathematics to be shared. In this way, the design and analysis of rubber components using the Finite Element Method should be enhanced.

In the first edition of this book I tried to survey in brief compass the main ideas, methods, and discoveries of rational thermodynamics as it then stood, only five years after Messrs. COLEMAN & NOLL, while in Baltimore, had written the fundamental memoir that provided for the new science the one root theretofore wanting. A survey in the same style today would require an almost wholly new book, three or four times as long. As it was in 1968, again in 1983 a consecutive treatise restricted to the foundations would be premature, for at this moment they are under earnest discussion, probing analysis, and powerful attack by several students and from several directions. Because, although in the first edition I expressed some opinions I no longer hold and made some statements I should now recast or even re tract, it seems even yet to offer a simple introduction to some aspects of the field that remain current, I have chosen to reprint it unaltered except for emendation of slips and bettering of the English here and there.

This book contains the papers presented at the conference on “Mathematical Models and Methods for Smart Materials”, held in Italy in 2001. The papers are divided into four parts:”Methods in Materials Science” deals mainly with mathematical techniques for the investigation of physical systems, such as liquid crystals, materials with internal variables, amorphous materials, and thermoelastic materials. Also, techniques are exhibited for the analysis of stability and controllability of classical models of continuum mechanics and of dynamical systems.”Modelling of Smart Materials” is devoted to models of superfluids, superconductors, materials with memory, nonlinear elastic solids, and damaged materials. In the elaboration of the models, thermodynamic aspects play a central role in the characterization of the constitutive properties.”Well-Posedness in Materials with Memory” deals with existence, uniqueness and stability for the solution of problems, most often expressed by integrodifferential equations, which involve materials with fading memory. Also, attention is given to exponential decay in viscoelasticity, inverse problems in heat conduction with memory, and automatic control for parabolic equations.”Analytic Problems in Phase Transitions” discusses nonlinear partial differential equations associated with phase transitions, and hysteresis, possibly involving fading memory effects. Particular applications are developed for the phase-field model with memory, the Stefan problem with a Cattaneo-type equation, the hysteresis in thermo-visco-plasticity, and the solid-solid phase transition.

Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models