This book focuses on the dissemination of information of permanent interest in thermo-mechanics applications and engineering technology. Contributions have clear relevance to industrial device and a relatively straightforward or feasible path to application. Chapters are sought that have long-term relevance to specific applications including convective heat transfer, fluid mechanics, combustion, aerodynamics, hydrodynamics, turbomachinery and multi-phase flows. In fact, many aspects in industrial operations and daily life are closely related to thermo-mechanics processes. Along with the development of computer industry and the advancement of numerical methods, solid foundation in both hardware and software has been established to study the processes by using numerical simulation methods, which play important roles in the ways of extending research topics, reducing research costs, discovering new phenomena, and developing new technologies. The presented case studies and development approaches aim to provide the readers, such as engineers and PhD students, with basic and applied studies broadly related to the Thermo-Mechanics Applications and Engineering Technology.

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.

Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding provides readers with a basic understanding of the fundamental ingredients in plasticity, heat transfer and electricity that are necessary to develop and proper utilize computer programs based on the finite element flow formulation. Computer implementation of a wide range of theoretical and numerical subjects related to mesh generation, contact algorithms, elasticity, anisotropic constitutive equations, solution procedures and parallelization of equation solvers is comprehensively described. Illustrated and enriched with selected examples obtained from industrial applications, Modeling of Thermo-Electro-Mechanical Manufacturing Processes with Applications in Metal Forming and Resistance Welding works to diminish the gap between the developers of finite element computer programs and the professional engineers with expertise in industrial joining technologies by metal forming and resistance welding.

Take some heat off the complexity of thermodynamics Does the mere thought of thermodynamics make you sweat? It doesn't have to! This hands-on guide helps you score your highest in a thermodynamics course by offering easily understood, plain-English explanations of how energy is used in things like automobiles, airplanes, air conditioners, and electric power plants. Thermodynamics 101 — take a look at some examples of both natural and man-made thermodynamic systems and get a handle on how energy can be used to perform work Turn up the heat — discover how to use the first and second laws of thermodynamics to determine (and improve upon) the efficiency of machines Oh, behave — get the 411 on how gases behave and relate to one another in different situations, from ideal-gas laws to real gases Burn with desire — find out everything you need to know about conserving mass and energy in combustion processes Open the book and find: The laws of thermodynamics Important properties and their relationships The lowdown on solids, liquids, and gases How work and heat go handin hand The cycles that power thermodynamic processes Chemical mixtures and reactions Ten pioneers in thermodynamics Real-world applications of thermodynamic laws and concepts Learn to: Master the concepts and principles of thermodynamics Develop the problem-solving skills used by professional engineers Ace your thermodynamics course

Provides an essential treatment of the subject and rigorous methods to solve all kinds of energy engineering problems.

Although the basic theories of thermodynamics are adequately covered by a number of existing texts, there is little literature that addresses more advanced topics. In this comprehensive work the author redresses this balance, drawing on his twenty-five years of experience of teaching thermodynamics at undergraduate and postgraduate level, to produce a definitive text to cover thoroughly, advanced syllabuses. The book introduces the basic concepts which apply over the whole range of new technologies, considering: a new approach to cycles, enabling their irreversibility to be taken into account; a detailed study of combustion to show how the chemical energy in a fuel is converted into thermal energy and emissions; an analysis of fuel cells to give an understanding of the direct conversion of chemical energy to electrical power; a detailed study of property relationships to enable more sophisticated analyses to be made of both high and low temperature plant and irreversible thermodynamics, whose principles might hold a key to new ways of efficiently covering energy to power (e.g. solar energy, fuel cells). Worked examples are included in most of the chapters, followed by exercises with solutions. By developing thermodynamics from an explicitly equilibrium perspective, showing how all systems attempt to reach a state of equilibrium, and the effects of these systems when they cannot, the result is an unparalleled insight into the more advanced considerations when converting any form of energy into power, that will prove invaluable to students and professional engineers of all disciplines.

Thermodynamic Approaches in Engineering Systems responds to the need for a synthesizing volume that throws light upon the extensive field of thermodynamics from a chemical engineering perspective that applies basic ideas and key results from the field to chemical engineering problems. This book outlines and interprets the most valuable achievements in applied non-equilibrium thermodynamics obtained within the recent fifty years. It synthesizes nontrivial achievements of thermodynamics in important branches of chemical and biochemical engineering. Readers will gain an update on what has been achieved, what new research problems could be stated, and what kind of further studies should be developed within specialized research. - Presents clearly structured chapters beginning with an introduction, elaboration of the process, and results summarized in a conclusion - Written by a first-class expert in the field of advanced methods in thermodynamics - Provides a synthesis of recent thermodynamic developments in practical systems - Presents very elaborate literature discussions from the past fifty years

This is an introduction to thermodynamics for engineering students. No previous knowledge is assumed. The book covers the first and second laws of thermodynamics and their consequences for engineers. Each topic is illustrated with worked examples and subjects are introduced in a logical order allowing the student to tackle increasingly complex problems as he reads. Problems and selected answers are included. The heart of engineering thermodynamics is the conversion of heat into work. Increasing demands for more efficient conversion, for example to reduce carbon dioxide emissions, are leading to the adoption of new thermodynamic cycles. However the principles of these new cycles are very simple and are subject to the standard laws of thermodynamics as explained in this book.

Modern Engineering Thermodynamics - Textbook with Tables Booklet offers a problem-solving approach to basic and applied engineering thermodynamics, with historical vignettes, critical thinking boxes and case studies throughout to help relate abstract concepts to actual engineering applications. It also contains applications to modern engineering issues. This textbook is designed for use in a standard two-semester engineering thermodynamics course sequence, with the goal of helping students develop engineering problem solving skills through the use of structured problem-solving techniques. The first half of the text contains material suitable for a basic Thermodynamics course taken by engineers from all majors. The second half of the text is suitable for an Applied Thermodynamics course in mechanical engineering programs. The Second Law of Thermodynamics is introduced through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Property Values are discussed before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems provide an extensive opportunity to practice solving problems. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet. University students in mechanical, chemical, and general engineering taking a thermodynamics course will find this book extremely helpful. Provides the reader with clear presentations of the fundamental principles of basic and applied engineering thermodynamics. Helps students develop engineering problem solving skills through the use of structured problem-solving techniques. Introduces the Second Law of Thermodynamics through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Covers Property Values before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems offer students extensive opportunity to practice solving problems. Historical Vignettes, Critical Thinking boxes and Case Studies throughout the book help relate abstract concepts to actual engineering applications. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet.