This book is a printed edition of the Special Issue "State-of-the-Art Materials Science in Belgium 2017" that was published in Materials

August 31-September 01, 2017 Brussels,Belgium Key Topics : Advanced Nanomaterials, Nano Medicine and Nano Biotechnology, Nanotech for Energy and Environment, Nano Science and Technology, Nano Computational Modeling, Nano Applications, Nano Materials Synthesis and Characterisation, Nano-Electronics, Nano Photonics, Nanobiomaterials, Molecular Nanotechnology, Nano Biometrics, Nanotechnology and Cosmetics, Nanotechnology in Tissue Engineering, Nanotechnology in Agriculture and Food Industry, Carbon based Nanomaterial’s and Devices, Nanotechnology Safety,

Functionalization of material systems is one of the key developments nowadays in the textile industry, where particles are frequently used to enhance the properties of fibers and to add new functionalities. This book focuses on innovative textile materials and is a perfect guide for professionals in the textile industry and scientists alike. An overview of particle technology is provided before addressing all topics relevant to particle-enhanced textiles, i.e. the properties and application of micro/nanoparticles in textiles, production techniques, safety, as well as regulatory and intellectual property aspects. The book covers the composition and applications of various types of textile fillers, finishings, and microfibers. gives an outlook on future trends and challenges in the research, development, and production of nano- and micro-enabled textiles. The authors of the book, who are leading experts in their fields, address many aspects relevant to the use of particle-enhanced textiles in industrial applications as well as in our daily life. A particular emphasis is put on practical examples of applications and products, safety and sustainability issues and the potential for further innovation. This book should bring inspiration for textile scientists in using particles for improving textiles and further expanding their possibilities of use.

The book presents recent advances in the following fields: Theoretical aspects, characterization and applications of powder and PM products. New developments in powder production and processing. Functional Materials. Nanomaterials and Nanotechnologies. Health, Safety and Environmental Aspects of Particulates. Keywords: Powder Metallurgy, Powder Characterization, Functional Materials, Nanomaterials, Health Aspects of Particulates, Environmental Aspects of Particulates, Microwires in Cellulose Matrix, Multi-layer Steel, Reactive Mechanical Milling, Green Synthesis of Nanoparticles, Linear Homopolymers, Plasma Jet Depositions on Steel, Mössbauer Spectroscopy of Nanocomposites, Manganese Silicides, Quartz Sand, Weldability Model, Thin Films for Optical MEMS, Magnetron Sputtered Thin Films, Graphene Oxide / PVC Composites, Amorphous Alloy Preparation, Zirconium-doped Indium Oxide, W/Cu Nanocomposite Powders, W/Cu Functionally Graded Materials, Reactive Magnetron Sputtering, Heusler Alloys.

This book covers a new frontier of research in Critical Materials that provides insight in terms of the possible sustainable mitigation strategies, the complexity, broadness and multi-disciplinarity of the subject. By exploring in both 'systems view' and 'in-depth materials view' in light of the circular economy, this book tackles the problem of sustainable usage of materials that is closely intertwined with the energy issue and climate change. Topics covered include: geopolitics of materials, the energy-materials nexus, definitions of the criticality of materials, circular product design, the development of alternative materials (substitution), sustainable mining and recycling.

This Proceedings contains the papers of the fib Symposium “CONCRETE Innovations in Materials, Design and Structures”, which was held in May 2019 in Kraków, Poland. This annual symposium was co-organised by the Cracow University of Technology. The topics covered include Analysis and Design, Sustainability, Durability, Structures, Materials, and Prefabrication. The fib, Fédération internationale du béton, is a not-for-profit association formed by 45 national member groups and approximately 1000 corporate and individual members. The fib’s mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic and environmental performance of concrete construction. The fib, was formed in 1998 by the merger of the Euro-International Committee for Concrete (the CEB) and the International Federation for Prestressing (the FIP). These predecessor organizations existed independently since 1953 and 1952, respectively.

Recent years have witnessed the flourishing of numerous novel strategies based on the magnetron sputtering technique aimed at the advanced engineering of thin films, such as HiPIMS, combined vacuum processes, the implementation of complex precursor gases or the inclusion of particle guns in the reactor, among others. At the forefront of these approaches, investigations focused on nanostructured coatings appear today as one of the priorities in many scientific and technological communities: The science behind them appears in most of the cases as a "terra incognita", fascinating both the fundamentalist, who imagines new concepts, and the experimenter, who is able to create and study new films with as of yet unprecedented performances. These scientific and technological challenges, along with the existence of numerous scientific issues that have yet to be clarified in classical magnetron sputtering depositions (e.g., process control and stability, nanostructuration mechanisms, connection between film morphology and properties or upscaling procedures from the laboratory to industrial scales) have motivated us to edit a specialized volume containing the state-of-the art that put together these innovative fundamental and applied research topics. These include, but are not limited to: • Nanostructure-related properties; • Atomistic processes during film growth; • Process control, process stability, and in situ diagnostics; • Fundamentals and applications of HiPIMS; • Thin film nanostructuration phenomena; • Tribological, anticorrosion, and mechanical properties; • Combined procedures based on the magnetron sputtering technique; • Industrial applications; • Devices.

Tribology of Additively Manufactured Materials: Fundamentals, Modeling, and Applications starts with a look at the history, methods and mechanics of additive manufacturing (AM), focusing on power bed fusion-based and direct energy deposition-based additive manufacturing. Following sections of the book provide a foundational background in the fundamentals of tribology, covering the basics of surface engineering, friction and wear, corrosion and tribocorrosion, and the tribological considerations of a variety of AM materials, such as friction and wear in non-metallic and metallic AM materials, degradation in non-metallic AM components, and corrosion and tribocorrosion in AM components. The book then concludes with a section covering modeling and simulation scenarios and challenges related to the tribology of AM materials, providing readers with the processing conditions needed to extend and strengthen the lifetime and durability of AM materials and components. - Provides theoretical, experimental and computational data for a better understanding of the complex tribological behaviors in additively manufactured components - Discusses applications of additively manufactured components, considering their tribological properties - Studies how unique surface roughness and texture develop in additively manufactured components and how these unique characteristics affect their tribological function - Outlines variables, additive manufacturing methods and performance of additively manufactured components - Equips readers with a better understanding of degradation effects due to tribology and corrosion

Interdisciplinary study on the role of earthquakes in the eastern Mediterranean Does the “Minoan myth” still stand up to scientific scrutiny? Since the work of Sir Arthur Evans at Knossos (Crete, Greece), the romanticized vision of the Cretan Bronze Age as an era of peaceful prosperity only interrupted by the catastrophic effects of natural disasters has captured the popular and scientific imagination. Its impact on the development of archaeology, archaeoseismology, and earthquake geology in the eastern Mediterranean is considerable. Yet, in spite of more than a century of archaeological explorations on the island of Crete, researchers still do not have a clear understanding of the effects of earthquakes on Minoan society. This volume, gathering the contributions of Minoan archaeologists, geologists, seismologists, palaeoseismologists, geophysicists, architects, and engineers, provides an up-to-date interdisciplinary appraisal of the role of earthquakes in Minoan society and in Minoan archaeology – what we know, what are the remaining issues, and where we need to go. Contributors: Tim Cunningham (Université catholique de Louvain), Jan Driessen (Université catholique de Louvain), Charalampos Fassoulas (Natural History Museum of Crete, University of Crete), Christoph Grützner (RWTH Aachen University, University of Cambridge), Susan E. Hough (U.S. Geological Survey), Simon Jusseret (The University of Texas at Austin, Université catholique de Louvain), Colin F. Macdonald (The British School at Athens), Jack Mason (RWTH Aachen University), James P. McCalpin (GEO-HAZ Consulting Inc.), Floyd W. McCoy (University of Hawaii – Windward), Clairy Palyvou (Aristotle University of Thessaloniki), Gerassimos A. Papadopoulos (National Observatory of Athens), Klaus Reicherter (RWTH Aachen University), Manuel Sintubin (KU Leuven), Jeffrey S. Soles (University of North Carolina – Greensboro), Rhonda Suka (Research Corporation of the University of Hawaii), Eleftheria Tsakanika (National Technical University of Athens), Thomas Wiatr (RWTH Aachen University, German Federal Agency for Cartography and Geodesy).

Sustainable Construction Materials: Recycled Aggregate focuses on the massive systematic need that is necessary to encourage the uptake of recycled and secondary materials (RSM) in the construction industry. This book is the fifth and the last of the series on sustainable construction materials and like the previous four, it is also different to the norm. Its uniqueness lies in using the newly developed, Analytical Systemisation Method, in building the data-matrix sourced from 1413 publications, contributed by 2213 authors from 965 institutions in 67 countries, from 1977 to 2018, on the subject of recycled aggregate as a construction material, and systematically analysing, evaluating and modelling this information for use of the material as an aggregate concrete and mortar, geotechnics and road pavement applications. Environmental issues, case studies and standards are also discussed. The work establishes what is already known and can be used to further progress the use of sustainable construction materials. It can also help to avoid repetitive research and save valuable resources. The book is structured in an incisive and easy to digest manner and is particularly suited for researchers, academics, design engineers, specifiers, contractors, and government bodies dealing with construction works. - Provides an exhaustive and comprehensively organized list of globally-based published literature spanning 5000 references - Offers an analysis, evaluation, repackaging and modeling of existing knowledge that encourages more responsible use of waste materials - Provides a wealth of knowledge for use in many sectors relating to the construction profession, including academia, research, practice and adoption of RSM