Integrate the best building envelope construction methods, materials science, and structural principles in your work using this book as a resource to help you... With more than seventy significant case studies located in North America, South America, Europe, and Asia from prehistory to the present, this book illuminates the theory and techniques of assembling exteriors. Six chapters organized by wall types, from hand-set monolithic walls to digitally fabricated curtain walls, each have a material focus section to help you understand their intrinsic properties so that you can decide which will best keep the weather out of your building. Examples from the ancient world, including the Pyramids and the Great Wall, through a range of renowned modern architects, such as Studio Gang, Sauerbruch Hutton, Herzog and deMeuron, and Rafael Moneo, illustrate how significant works in the history of architecture explored innovative use of materials – stone, brick, concrete, glass, and aluminium. Along the way, principles of construction from masonry and basic framing through ever more sophisticated envelope systems address classic problems presented by gravity, wind, rain, and sun with studies of lateral forces, building movements and materials that bridge the gaps in between them.

Integrate the best building envelope construction methods, materials science, and structural principles in your work using this book as a resource to help you... With more than seventy significant case studies located in North America, South America, Europe, and Asia from prehistory to the present, this book illuminates the theory and techniques of assembling exteriors. Six chapters organized by wall types, from hand-set monolithic walls to digitally fabricated curtain walls, each have a material focus section to help you understand their intrinsic properties so that you can decide which will best keep the weather out of your building. Examples from the ancient world, including the Pyramids and the Great Wall, through a range of renowned modern architects, such as Studio Gang, Sauerbruch Hutton, Herzog and deMeuron, and Rafael Moneo, illustrate how significant works in the history of architecture explored innovative use of materials – stone, brick, concrete, glass, and aluminium. Along the way, principles of construction from masonry and basic framing through ever more sophisticated envelope systems address classic problems presented by gravity, wind, rain, and sun with studies of lateral forces, building movements and materials that bridge the gaps in between them.

This book discusses a new method for the design and engineering of complex façades. Based on the file-to-factory concept, the method combines parametric design approaches and additive manufacturing. Parametric design and additive manufacturing are both growing trends that open up new possibilities. Parametric design approaches change how planners / designers perceive building details. Further, new engineering concepts are needed to cope with the increasing complexity of architectural geometries due to the rapid developments in areas such as façade systems, modeling software and digital manufacturing techniques.

A comprehensive guide to the design and execution of sophisticated exterior building enclosures Focused on the design process for architects and related professionals, this book addresses the design and execution of sophisticated exterior building enclosures for a number of commercial building types and in a variety of building materials. It focuses on the design process by delineating enclosure basics, the participants (owners, architects, engineers, consultants) and their roles and responsibilities through collaboration, and tracking the design process through construction. This comprehensive handbook covers all of the factors that affect the design of a building enclosure, including function, visual aesthetics, performance requirements, and many other criteria. In-depth case studies of projects of various scales, types, and climate conditions illustrate the successful implementation of exterior wall enclosure solutions in brick masonry, stone, architectural concrete, glass, and metals. This unique and indispensable guide: Defines the functions, physical requirements, design principles, and types of exterior building enclosures Identifies the participants in the design and construction process and specifies their roles and responsibilities Presents a step-by-step process for the design of exterior enclosures, from defining goals and developing concepts through creating construction documents Reviews the construction process from bidding and negotiation through the paper phase to the "brick and mortar" stage Provides details on the properties of exterior enclosure materials, including structural considerations, weather protection, fire safety, and more Covers a variety of materials, including brick masonry, natural stone masonry, architectural concrete, metal framing and glass, and all-glass enclosures Written by the technical director of the San Francisco office of Skidmore, Owings & Merrill, Exterior Building Enclosures is an indispensable resource for architects, engineers, facade consultants, and green design consultants working on commercial building projects.

Recovery in construction is still on track. Business confidence is increasing – but still not yet secure. Following the 18% fall in tender prices between 2008 and 2013, price levels are beginning to recover some lost ground, particularly in the residential sector and with London based projects. It is important to make sure tenders are competitive, whilst minimising your risk as input material prices and labour rates continue to rise and tender prices are forecast to increase an average of 4.5% over the next 3 years, reaching the pre 2008 recession levels in 2017. Spon's Architect's and Builders' Price Book, compiled by AECOM, still provides the most accurate, detailed and professionally relevant construction price information for the UK. Its unique Tender Index, updated through the year, gives an ongoing reality check and allows you to adjust for changing market conditions. Although it suits a wide range of project sizes, this is the only price book which sets out a detailed cost base for contracts exceeding £3,500,000 in value. Use the access code inside the front cover of the book to get set up with internet access to this 2015 edition until the end of December 2015. We now provide SPON’S Online, a versatile and powerful online data viewing package. Major changes have been made to this 140th edition: As well as an overhaul of prices, over new items have been added. These include: New cost models for Business Parks and Data Centres An expanded range of Kingspan roof and wall claddings New ASSA ABBLOY sectional overhead doors, including rapid opening and fabric New ASSA ABBLOY industrial dock levellers and shelters An increased range of Altro safety flooring and resin flooring systems New Altro Whiterock hygiene doorsets

Architects write a lot, especially now when conceptual aspects have become central in the advanced reflections and narrative forms increasingly intersect the quest of design practices far an ultimate legitimation. In the growing mass of the publishing offer, these keywords try to highlight recurrent issues, tracking synthetic paths of orientation between different critical positions, with particular attention to what happens in the neighbouring fields of the arts and sciences.

Energy efficient lighting is said to be one of the most cost-effective approaches to save energy and reduce C02 emissions. In order to stimulate the application of lighting retrofits of good quality, IEA Task 50, Subtask B “Daylighting and Electric Lighting solutions” has looked into the assessment of existing and new technical retrofit solutions in the field of façade and daylighting technology, electric lighting and lighting controls. The document provides information for those involved in the development of retrofit products or involved in the decision making process of a retrofit project, such as buildings owners, authorities, designers and consultants, as well as the lighting and façade industry. This source book addresses both electric lighting solu¬tions and daylighting solutions, and offers a method to compare these retrofit solutions on a common basis, including a wide range of quality criteria of cost-related and lighting quality aspects. Simple retrofits, such as replacing a lamp or adding interior blinds, are widely accepted, often applied because of their low initial costs or short payback periods. The work presented in this report aims at promoting state-of-the-art and new lighting retrofit approaches that might cost more but offer a further reduction of energy consumption while improving lighting quality to a greater extend. Energieeffiziente Beleuchtung ist eine der effektivsten Möglichkeiten, Energie zu sparen und damit die Emission von CO2 zu vermindern. Im Rahmen des IEA Task 50, Subtask B “Daylighting and Electric Lighting solutions” wurden daher neue und vorhandene technische Sanierungslösungen für Gebäude in den Bereichen Fassade, Tageslichttechnik, künstliche Beleuchtung sowie Lichtsteuerung bewertet, um die Anwendung hochwertiger Lösungen voranzutreiben. Die Informationen sind dabei für alle in den Sanierungsprozess einbezogenen Personen von großem Interesse, wie z. B. Gebäudeeigentümer, Behörden, Planer und Berater aber auch für Hersteller und Entwickler von Beleuchtungs- und Fassadenlösungen. Betrachtet werden sowohl künstliche als auch Beleuchtungslösungen mit Tageslicht, wobei eine Methode entwickelt wurde, die Sanierungslösungen grundlegend miteinander zu vergleichen. Hierbei werden zahlreiche Kriterien berücksichtigt, die energetische, lichttechnische, thermische und kostenbezogene Aspekte beinhalten. Einfache Sanierungsmaßnahmen wie der Austausch von Lampen oder die Montage innenliegender Jalousien werden weitgehend akzeptiert und oft verwendet, da sie kostengünstig sind und sich schnell amortisieren. Die vorliegende Arbeit hat es sich zum Ziel gesetzt, die Anwendung neuer und dem Stand der Technik entsprechender Beleuchtungslösungen für die Sanierung zu fördern. Diese verursachen zwar eventuell höhere Kosten, ermöglichen jedoch eine weitere Energieeinsparung bei gleichzeitiger Verbesserung der Beleuchtungsqualität.

This is a guide to both the basics and the details of tall building design, delving into the rudimentary aspects of design that an architect of a tall office building must consider, as well as looking at the rationale for why and how a building must be built the way it is. Liberally illustrated with clear, simple black and white illustrations showing how the building structure and details can be built, this book greatly assists the reader in their understanding of the building process for a modern office tower. It breaks down the building into three main components: the structure, the core and the facade, writing about them and illustrating them in a simple-to-understand manner. By focusing on the nuts and bolts of real-life design and construction, it provides a practical guide and desk-reference to any architect or architecture student embarking on a tall building project.

Strong output demand over the last year has stretched the industry. The issues are being felt by all firms across the delivery chain – from clients to subcontractors. Capacity constraints almost always manifest themselves in prices. Increased tender prices have become the primary symptom of these supply-side issues. The main driver of new work output growth over the last 18 months is slowing. Both the public and private housing sectors are quickly reversing all of their recent upward trends when looked at on a yearly growth basis. The counterpoint to this is that the yearly growth figures are still positive, meaning that new work continues to flow. SPON’S ARCHITECTS’ AND BUILDERS’ PRICE BOOK 2016, compiled by AECOM, still provides the most accurate, detailed and professionally relevant construction price information for the UK. Its unique Tender Index, updated through the year, gives an ongoing reality check and allows you to adjust for changing market conditions. Although it suits a wide range of project sizes, this is the only price book which sets out a detailed cost base for contracts exceeding £3,500,000 in value. Use the access code inside the front cover of the book to get set up with internet access to this 2016 edition until the end of December 2016. We now provide SPON’S Online, a versatile and powerful online data viewing package -- online or offline on your PC/Mac, smartphone or tablet. You can browse and search the content across all the price books you own, make notes and highlights and share these notes with other users. Major changes have been made to this 141st edition: For the first time, plant prices have been separated out in the measured works section. As well as an overhaul of prices, several new items have been added, including: Two new cost models for a stand-alone private patient ward within a larger hospital complex, and an extra care home An expanded range of ACO drainage channels Precast concrete ‘Perfect Manholes’ by CPM Shower-wall laminated panelling walling An expanded range of architectural pre-finished blockwork ... along with the standard features you have come to expect from SPON’S ARCHITECTS’ AND BUILDERS’ PRICE BOOK: 20,000 prices for the most frequently specified items, the majority with labour constants and detailed build-ups. Hundreds of alternative materials prices for the more unusual items. Detailed guidance on wage rates, daywork, cost limits and allowances, property insurance and professional fees, plus useful formulae, design criteria and trade association addresses. Updated, free of charge, two or three times a year – see inside for registration details. Updates are available online at www.pricebooks.co.uk Other titles in the Spon’s Price Book Series: SPON’S MECHANICAL AND ELECTRICAL SERVICES PRICE BOOK 2016 SPON’S CIVIL ENGINEERING AND HIGHWAY WORKS PRICE BOOK 2016 SPON’S EXTERNAL WORKS AND LANDSCAPE PRICE BOOK 2016

In the last two decades, the biannual ECPPM (European Conference on Product and Process Modelling) conference series has provided a unique platform for the presentation and discussion of the most recent advances with regard to the ICT (Information and Communication Technology) applications in the AEC/FM (Architecture, Engineering, Construction and