Simulation and modeling contribute to a broad range of applications in computational science and robotics technology, often addressing important design and control problems. This book presents a selection of papers from the International Workshop on Simulation and Modeling related to Computational Science and Robotics Technology (SiMCTR 2011), held at Kobe University, Japan, in November 2011. The workshop provided a forum for discussing recent developments in the growing field of engineering science and mathematical sciences, and brought together a diverse group of researchers in these areas to share and compare the different approaches to simulation and modeling in computational science and robotics technology. The workshop was also aimed at establishing collaborative links between engineering researchers related to information and robotics technology (IRT) and applied mathematicians working in modeling and computational methods for design and control.

This book constitutes the refereed proceedings of the Third International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2012, held in Tsukuba, Japan, in November 2012. The 33 revised full papers and presented together with 3 invited talks were carefully reviewed and selected from 46 submissions. Ten papers describe design of complex behaviors of autonomous robots, 9 address software layers, 8 papers refer to related modeling and learning. The papers are organized in topical sections on mobile robots, software modeling and architecture and humanoid and biped robots.

This volume is concerned with Computational Techniques in Modeling and Simulation. Initially, there are four research papers and apart from those, the rest of the research papers are coming from the International Conference on Modeling and Simulation (MS2012), held in Minsk, 24 May 2012. MS'12 was co-organised by the AMSE Association and the Belarusian State University in co-operation with other scientific establishments: the Belarusian Academy of Sciences (United Institute of Problems of Informatics), the Belarusian Society of International Association of Pattern Recognition and the International Association for Fuzzy Set Management and Economy (SIGEF, Spain). The Conference was sponsored by the Belarusian State University and Byelex Multimedia Products BV (The Netherlands). It offered a unique opportunity for researchers, professionals and students to share ideas concerning modelling, simulation and implementation of the results in the real world.We would like to thank all contributors, referees, honorary committees for their co-operation within MS'12, in particular: Jaime Gil Aluja (AMSE President), Sergey Ablameyko (the Rector of the Belarusian State University) as honorary chairmen.

NASA's Office of the Chief Technologist (OCT) has begun to rebuild the advanced space technology program in the agency with plans laid out in 14 draft technology roadmaps. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development and its technology base has been largely depleted. However, success in executing future NASA space missions will depend on advanced technology developments that should already be underway. Reaching out to involve the external technical community, the National Research Council (NRC) considered the 14 draft technology roadmaps prepared by OCT and ranked the top technical challenges and highest priority technologies that NASA should emphasize in the next 5 years. This report provides specific guidance and recommendations on how the effectiveness of the technology development program managed by OCT can be enhanced in the face of scarce resources.

This volume contains the peer-reviewed proceedings of the International Conference on Modelling and Simulation (MS-17), held in Kolkata, India, 4th-5th November 2017, organized by the Association for the Advancement of Modelling and Simulation Techniques in Enterprises (AMSE, France) in association with the Institution of Engineering Technology (IET, UK), Kolkata Network. The contributions contained here showcase some recent advances in modelling and simulation across various aspects of science and technology. This book brings together articles describing applications of modelling and simulation techniques in fields as diverse as physics, mathematics, electrical engineering, industrial electronics, control, automation, power systems, energy and robotics. It includes a special section on mechanical, fuzzy, optical and opto-electronic control of oscillations. It provides a snapshot of the state of the art in modelling and simulation methods and their applications, and will be of interest to researchers and engineering professionals from industry, academia and research organizations.

This book constitutes the thoroughly refereed post-workshop proceedings of the 5th International Workshop on Modelling and Simulation for Autonomous Systems, MESAS 2018, held in Prague, Czech Republic, in October 2018. The 46 revised full papers included in the volume were carefully reviewed and selected from 66 submissions. They are organized in the following topical sections: Future Challenges of Advanced M&S Technology; Swarming - R&D and Application; M&S of Intelligent Systems - AI, R&D and Application; AxS in Context of Future Warfare and Security Environment (Concepts, Applications, Training, Interoperability, etc.).

As modern technologies continue to develop and evolve, the ability of users to adapt with new systems becomes a paramount concern. Research into new ways for humans to make use of advanced computers and other such technologies through artificial intelligence and computer simulation is necessary to fully realize the potential of tools in the 21st century. Advanced Methodologies and Technologies in Artificial Intelligence, Computer Simulation, and Human-Computer Interaction provides emerging research in advanced trends in robotics, AI, simulation, and human-computer interaction. Readers will learn about the positive applications of artificial intelligence and human-computer interaction in various disciples such as business and medicine. This book is a valuable resource for IT professionals, researchers, computer scientists, and researchers invested in assistive technologies, artificial intelligence, robotics, and computer simulation.

Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.

The emergence of mechatronics has advanced the engineering disciplines, producing a plethora of useful technical systems. Advanced Engineering and Computational Methodologies for Intelligent Mechatronics and Robotics presents the latest innovations and technologies in the fields of mechatronics and robotics. These innovations are applied to a wide range of applications for robotic-assisted manufacturing, complex systems, and many more. This publication is essential to bridge the gap between theory and practice for researchers, engineers, and practitioners from academia to government.