The development of protective measures to guard against the spread of radioactive debris following reactor disasters has been given extensive and careful engineering attention over the past several years. Much of this attention has been devoted to eliminating or minimizing the effects of malfunctions of internal components. But reactors can also suffer externally caused disasters—for example, their radioactive cores can be damaged by earthquakes or by missiles generated by tornadoes. Earthquakes in particular will continue to render man vulnerable even to the "peaceful atom" as the number of nuclear power plants increases and as they come to be located in those parts of the world that have a history of seismic activity. It was to consider such problems that the seminar reported here was held. The conferees, who are leaders in this special and important field, gathered in Cambridge, Massachusetts, in spring 1969, to present the papers whose titles are listed below. Together they cover both the theoretical underpinnings of the subject and specific applications to nuclear reactors; they provide both useful summaries of what is known to date and some new thinking on the subject, not before published. Contents: Preface—T. J. Thompson. Foreword—R. J. Hansen. Introduction—R. V. Whitman. Geological and Seismological Factors Influencing the Assessment of a Seismic Threat to Nuclear Reactors—Daniel Linehan, S. J. Geophysics—Keiiti Aki. Design Seismic Inputs—C. Allin Cornell. Some Observations on Probabilistic Methods in the Seismic Design of Nuclear Power Plants—C. Allin Cornell. Seismic Risk and Seismic Design Decisions—Luis Esteva. Fundamentals of Soil Amplification—J. M. Roesset. Soil Structure Interaction—R. V. Whitman. Evaluation of Soil Properties for Site Evaluation and Dynamic Analysis of Nuclear Plants—R. V. Whitman. Structural Response to Seismic Input—J. M. Biggs. Seismic Analysis of Equipment Mounted on a Massive Structure—J. M. Biggs and J. M. Roesset. Modal Response of Containment Structures—Peter Jan Pahl. Provision of Required Seismic Resistance—M. J. Holley, Jr. A Measure of Earthquake Intensity—Arturo Arias. Closure—R. J. Hansen.

Seismic Risk Analysis of Nuclear Power Plants addresses the needs of graduate students in engineering, practicing engineers in industry, and regulators in government agencies, presenting the entire process of seismic risk analysis in a clear, logical, and concise manner. It offers a systematic and comprehensive introduction to seismic risk analysis of critical engineering structures focusing on nuclear power plants, with a balance between theory and applications, and includes the latest advances in research. It is suitable as a graduate-level textbook, for self-study, or as a reference book. Various aspects of seismic risk analysis - from seismic hazard, demand, and fragility analyses to seismic risk quantification, are discussed, with detailed step-by-step analysis of specific engineering examples. It presents a wide range of topics essential for understanding and performing seismic risk analysis, including engineering seismology, probability theory and random processes, digital signal processing, structural dynamics, random vibration, and engineering risk and reliability.

This Safety Guide provides recommendations on a generally accepted way to design a nuclear power plant so that an earthquake motion at the site will not jeopardize the safety of the plant. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.

This guide was originally issued as Safety Guide No. 50-SG-S2. It provides details on the design of a nuclear power plant such that earthquakes at the site determined according to Safety Guide No. 50-SG-S1 will not jeopardize its safety.

This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.

This Safety Guide provides recommendations on how to meet the applicable safety requirements in relation to the design aspects of new nuclear installations subjected to seismic hazard. These recommendations focus on the consistent application of methods and procedures, in accordance with best practice, for seismic analysis, design, testing and qualification of structures, systems and components. New recommendations include applications of seismic isolation systems, the seismic margin to be achieved by the design and application of the graded approach. This Safety Guide is intended for use by organizations involved in the seismic design of nuclear installations, in analysis, verification and review, and in the provision of technical support, as well as by regulatory bodies.

This Safety Report provides up to date detailed guidance on actions to be taken in preparation for, and following, an earthquake at a nuclear power plant, taking into account the gained knowledge and experience of Member States from the occurrence of strong earthquakes that affected nuclear power plants up to 2010. The publication is a compilation of available references based on related standards and proposes a more comprehensive set of criteria than the existing ones in some national regulations, based on damage and earthquake exceedance levels for dealing with situations related to plant shutdown, plant restart or plant continuing operation following the occurrence of an earthquake which may exceed the original design level. It will be a useful tool for regulatory bodies, specialists on earthquake engineering and technical support organizations.

This book focuses on the seismic design of Structures, Piping Systems and Components (SSC). It explains the basic mechanisms of earthquakes, generation of design basis ground motion, and fundamentals of structural dynamics; further, it delves into geotechnical aspects related to the earthquake design, analysis of multi degree-of-freedom systems, and seismic design of RC structures and steel structures. The book discusses the design of components and piping systems located at the ground level as well as at different floor levels of the structure. It also covers anchorage design of component and piping system, and provides an introduction to retrofitting, seismic response control including seismic base isolation, and testing of SSCs. The book is written in an easy-to-understand way, with review questions, case studies and detailed examples on each topic. This educational approach makes the book useful in both classrooms and professional training courses for students, researchers, and professionals alike.