This publication contains information on the dosimetry and monitoring of tritium, the use of protective clothing for work with tritium, safe practices in tritium handling laboratories and details of tritium compatible materials. The information has been compiled from experience in the various applications of tritium and should represent valuable source material to all users of tritium, including those involved in fusion R&D.

The use of tritium as a basic fuel material in a thermonuclear fusion reactor raises particular safety issues due to the combined effects of its physico chemical properties and radioactive nature. Furthermore the possibility of attaining further significant progresses in developing and demonstrating the feasibility of tritium burning devices relies on the handling of tritium macroquantities, say ten grammes, in a safe and reliable manner. It is also undoubted that, apart from technological constraints, any validation and exploitation of thermonuclear fusion as a source of energy will be strongly conditioned by the application of stringent operational and environmental safety criteria as it derives from norms of the modern legislation and public acceptance considerations. Even if the safe handling of tritium has already been demonstrated to be feasible on a full fuel cycle scale, it is unanimously recognized that further efforts are still to be concentrated on the improvement of current concepts and development of advanced technologies. Some of the areas requiring substantial additional efforts are plasma exhaust fuel c1ean-up, tritium pellet injection, processing of inert carrier gas, development of large free-oil pumps,tritlUm process analytics, development of large detritiation systems, beryllium-tritium interaction studies, tritium hold-up studies in getter beds, adsorbers and structural materials, tritium recovery from first wall, structural and breeder materials for minimizing tritiated waste arising,tritium storage technology, tritiated waste disposal technolo~y, methodology for routine tritium accountancy,etc . . Most of them are intrinsically related to the safety requirement of tritium technology.

This book focuses on tritium as a fuel for fusion reactors and a next-generation energy source. Following an introduction of tritium as a hydrogen radioisotope, important issues involved in establishing safe and economical tritium fuel cycles including breeding for a fusion reactor are summarized; these include the handling of large amounts of tritium: confinement, leakage, contamination, permeation, regulation and tritium accountancy, and impacts on surrounding areas. Targeting and encouraging the students and technicians who will design and operate fusion reactors in the near future, this book offers a valuable resource on tritium science and technology.

The dangers of a United States government plan to abandon its fifty-year policy of keeping civilian and military uses of nuclear technology separate. In December 1998, Energy Secretary Bill Richardson announced that the U.S. planned to begin producing tritium for its nuclear weapons in commercial nuclear power plants. This decision overturned a fifty-year policy of keeping civilian and military nuclear production processes separate. Tritium, a radioactive form of hydrogen, is needed to turn A-bombs into H-bombs, and the commercial nuclear power plants that are to be modified to produce tritium are called ice condensers. This book provides an insider's perspective on how Richardson's decision came about, and why it is dangerous. Kenneth Bergeron shows that the new policy is unwise not only because it undermines the U.S. commitment to curb nuclear weapons proliferation but also because it will exacerbate serious safety problems at these commercial power facilities, which are operated by the Tennessee Valley Authority and are among the most marginal in the United States. The Nuclear Regulatory Commission's review of the TVA's request to modify its plants for the new nuclear weapons mission should attract significant attention and opposition. Tritium on Ice is part expose, part history, part science for the lay reader, and part political science. Bergeron's discussion of how the issues of nuclear weapons proliferation and nuclear reactor safety have become intertwined illuminates larger issues about how the federal government does or does not manage technology in the interests of its citizens and calls into question the integrity of government-funded safety assessments in a deregulated economy.

The field of nuclear magnetic resonance has experienced a number of spectacular developments during the last decade. Fourier transform methodology revolutionized signal acquisition capabilities. Superconducting magnets enhanced sensitivity and produced considerable improvement in spectral dispersion. In areas of new applicat ions, the life sciences particularly bene fited from these developments and probably saw the largest increase in usage. NMR imaging promises to offer a noninvasive alternative to X rays. High resolution is now achievable with solids, through magic angle spinning and cross polarization, so that the powers of NMR are applicable to previously intractable materials such as polymers, coal, and other geochemicals. The ease of obtaining relaxation times brought an important fourth variable, after the chemical shift, the coupling constant, and the rate constant, to the examination of structural and kinetic problems i~ all fields. Software development, particularly in the area of pulse sequences, created a host of useful tech niques, including difference decoupling and difference nuclear Overhauser effect spectra, multidimensional displays, signal enhancement (INEPT), coupling constant analysis for connectivity (INADEQUATE), and observation of specific structural classes such as only quaternary carbons. Finally, hardware development gave us access to the entire Periodic Table, to the particular advan tage of the inorganic and organometallic chemist. At the NATO Advanced Study Institute at Stirling, Scotland, the participants endeavored to examine all these advances, except imaging, from a multidisciplinary point of view.

Biosafety in the Laboratory is a concise set of practical guidelines for handling and disposing of biohazardous material. The consensus of top experts in laboratory safety, this volume provides the information needed for immediate improvement of safety practices. It discusses high- and low-risk biological agents (including the highest-risk materials handled in labs today), presents the "seven basic rules of biosafety," addresses special issues such as the shipping of dangerous materials, covers waste disposal in detail, offers a checklist for administering laboratory safetyâ€"and more.

Compounds labeled with carbon-14 and tritium are indispensable tools for research in biomedical sciences, discovery and development of pharmaceuticals and agrochemicals. Preparation of Compounds Labeled with Tritium and Carbon-14 is a comprehensive, authoritative and up-to-date discussion of the strategies, synthetic approaches, reactions techniques, and resources for the preparation of compounds labeled with either of these isotopes. A large number of examples are presented for the use of isotopic sources and building blocks in the preparation of labeled target compounds, illustrating the range of possibilities for embedding isotopic labels in selected moieties of complex structures. Topics include: Formulation of synthetic strategies for preparing labeled compounds Isotope exchange methods and synthetic alternatives for preparing tritiated compounds In-depth discussion of carbon-14 building blocks and their utility in synthesis Preparation of enantiomerically pure isotopically labeled compounds Applications of biotransformations Preparation of Compounds Labeled with Tritium and Carbon-14 is an essential guide to the specialist strategies and tactics used by chemists to prepare compounds tagged with theradioactive atoms carbon-14 and tritium.

Nuclear Safety provides the methods and data needed to evaluate and manage the safety of nuclear facilities and related processes using risk-based safety analysis, and provides readers with the techniques to assess the consequences of radioactive releases. The book covers relevant international and regional safety criteria (US, IAEA, EUR, PUN, URD, INI). The contents deal with each of the critical components of a nuclear plant, and provide an analysis of the risks arising from a variety of sources, including earthquakes, tornadoes, external impact and human factors. It also deals with the safety of underground nuclear testing and the handling of radioactive waste. - Covers all plant components and potential sources of risk including human, technical and natural factors. - Brings together information on nuclear safety for which the reader would previously have to consult many different and expensive sources. - Provides international design and safety criteria and an overview of regulatory regimes.

This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered.