This book presents an in-depth treatment of routing and wavelength assignment for optical networks, and focuses specifically on quality-of-service and fault resiliency issues. It reports on novel approaches for the development of routing and wavelength assignment schemes for fault-resilient optical networks, which improve their performance in terms of signal quality, call blocking, congestion level and reliability, without a substantial increase in network setup cost. The book first presents a solution for reducing the effect of the wavelength continuity constraint during the routing and wavelength assignment phase. Further, it reports on an approach allowing the incorporation of a traffic grooming mechanism with routing and wavelength assignment to enhance the effective channel utilization of a given capacity optical network using fewer electrical-optical-electrical conversions. As a third step, it addresses a quality of service provision scheme for wavelength-division multiplexing (WDM)-based optical networks. Lastly, the book describes the inclusion of a tree-based fault resilience scheme in priority-based dispersion-reduced wavelength assignment schemes for the purpose of improving network reliability, while maintaining a better utilization of network resources. Mainly intended for graduate students and researchers, the book provides them with extensive information on both fundamental and advanced technologies for routing and wavelength assignment in optical networks. The topics covered will also be of interest to network planners and designers.

Research and development on optical wavelength-division multiplexing (WDM) networks have matured considerably. While optics and electronics should be used appropriately for transmission and switching hardware, note that "intelligence'' in any network comes from "software,'' for network control, management, signaling, traffic engineering, network planning, etc.The role of software in creating powerful network architectures for optical WDM networks is emphasized. Optical WDM Networks is a textbook for graduate level courses. Its focus is on the networking aspects of optical networking, but it also includes coverage of physical layers in optical networks. The author introduces WDM and its enabling technologies and discusses WDM local, access, metro, and long-haul network architectures. Each chapter is self-contained, has problems at the end of each chapter, and the material is organized for self study as well as classroom use. The material is the most recent and timely in capturing the state-of-the-art in the fast-moving field of optical WDM networking.

This comprehensive handbook brings together experts who use optimization to solve problems that arise in telecommunications. It is the first book to cover in detail the field of optimization in telecommunications. Recent optimization developments that are frequently applied to telecommunications are covered. The spectrum of topics covered includes planning and design of telecommunication networks, routing, network protection, grooming, restoration, wireless communications, network location and assignment problems, Internet protocol, World Wide Web, and stochastic issues in telecommunications. The book’s objective is to provide a reference tool for the increasing number of scientists and engineers in telecommunications who depend upon optimization.

In recent years, with the rapid growth of the Internet, the bandwidth demand for data traffic is exploding. Optical networks based on wavelength-division multiplexing (WDM) technology offer the promise to satisfy the bandwidth requirements of the Internet infrastructure. With WDM technology, signals are carried simultaneously on mUltiple wavelengths on a single fiber. WDM provides a practical approach of resolving the mismatch between the fiber ca pacity and the peak electronic processing speed. Mesh-based WDM networks have recently attracted much research and development interest since the In ternet topology is meshed in nature, and more importantly, mesh-based WDM networks are flexible with respect to routing and survivability. This book exam ines the management and survivability issues of mesh-based WDM networks and proposes new WDM network protocols and algorithms that could make telecommunication networks more efficient. Wavelength-routing has been one of the most important technologies to em ploy WDM in backbone networks. In wavelength-routed WDM networks, optical channels, which are referred to as lightpaths, are set up between WDM terminals. Most chapters of this bock are focused on various issues related to wavelength-routed networks, namely, routing and wavelength-assignment, con trol and management, fault management, and wavelength-converter placement. This book also presents an all-optical packet-switched network architecture based on the concept of photonic slot routing. The audience for this book are network designers and planners, research and development engineers active in the field of telecommunications, and students of optical networking at the graduate or senior undergraduate levels.

The essential guide to the state of the art in WDM and its vast networking potential As a result of its huge transmission capacity and countless other advantages, fiber optics has fostered a bandwidth revolution, addressing the constantly growing demand for increased bandwidth. Within this burgeoning area, Wavelength Division Multiplexing (WDM) has emerged as a breakthrough technology for exploiting the capacity of optical fibers. Today, WDM is deployed by many network providers for point-to-point transmission-but there is strong momentum to develop it as a full-fledged networking technology in its own right. The telecommunications industry, network service providers, and research communities worldwide are paying close attention. Optical WDM Networks presents an easy-to-follow introduction to basic concepts, key issues, effective solutions, and state-of-the-art technologies for wavelength-routed WDM networks. Responding to the need for resources focused on the networking potential of WDM, the book is organized in terms of the most important networking aspects, such as: * Network control architecture * Routing and wavelength assignment * Virtual topology design and reconfiguration * Distributed lightpath control and management * Optical-layer protection and restoration * IP over WDM * Trends for the future in optical networks Each chapter includes examples and problems that illustrate and offer practical application of concepts, as well as extensive references for further reading. This is an essential resource for professionals and students in electrical engineering, computer engineering, and computer science as well as network engineers, designers, planners, operators, and managers who seek a backbone of knowledge in optical networks.

This book constitutes the refereed proceedings of the 11th International IFIP-TC6 Conference on Optical Network Design and Modeling, ONDM 2007, held in Athens, Greece, in May 2007. The 41 revised full papers presented together with 14 invited papers address all recent advances in the design, modeling and implementation of optical networks.

This book presents advances in the field of optical networks - specifically on research and applications in elastic optical networks (EON). The material reflects the authors’ extensive research and industrial activities and includes contributions from preeminent researchers and practitioners in optical networking. The authors discuss the new research and applications that address the issue of increased bandwidth demand due to disruptive, high bandwidth applications, e.g., video and cloud applications. The book also discusses issues with traffic not only increasing but becoming much more dynamic, both in time and direction, and posits immediate, medium, and long-term solutions throughout the text. The book is intended to provide a reference for network architecture and planning, communication systems, and control and management approaches that are expected to steer the evolution of EONs.

A comprehensive book on DWDM network design and implementation solutions Design Software Included Study various optical communication principles as well as communication methodologies in an optical fiber Design and evaluate optical components in a DWDM network Learn about the effects of noise in signal propagation, especially from OSNR and BER perspectives Design optical amplifier-based links Learn how to design optical links based on power budget Design optical links based on OSNR Design a real DWDM network with impairment due to OSNR, dispersion, and gain tilt Classify and design DWDM networks based on size and performance Understand and design nodal architectures for different classification of DWDM networks Comprehend different protocols for transport of data over the DWDM layer Learn how to test and measure different parameters in DWDM networks and optical systems The demand for Internet bandwidth grows as new applications, new technologies, and increased reliance on the Internet continue to rise. Dense wavelength division multiplexing (DWDM) is one technology that allows networks to gain significant amounts of bandwidth to handle this growing need. DWDM Network Designs and Engineering Solutions shows you how to take advantage of the new technology to satisfy your network's bandwidth needs. It begins by providing an understanding of DWDM technology and then goes on to teach the design, implementation, and maintenance of DWDM in a network. You will gain an understanding of how to analyze designs prior to installation to measure the impact that the technology will have on your bandwidth and network efficiency. This book bridges the gap between physical layer and network layer technologies and helps create solutions that build higher capacity and more resilient networks. Companion CD-ROM The companion CD-ROM contains a complimentary 30-day demo from VPIphotonicstrade; for VPItransmissionMakertrade;, the leading design and simulation tool for photonic components, subsystems, and DWDM transmission systems. VPItransmissionMaker contains 200 standard demos, including demos from Chapter 10, that show how to simulate and characterize devices, amplifiers, and systems.

Optical Networks with terabits per second bandwith have received significant interest from both researchers and practitioners. This book captures a collection of research and survey papers presenting the most recent developments in this exciting area. Contributions are from active researchers and cover a wide range of topics, including static and dynamic wavelength assignment algorithms, optimized wavelength converter allocation, traffic scheduling for QoS support, connection management, multicast routing, terabit packet switch architectures, multifiber networks, and multistage interconnection networks. The articles summarize the existing techniques, current developments and future directions as well as propose novel solutions to some important problems. Audience: The book is an ideal reference for researchers, engineers and students interested in optical networks to learn about current research activity and guide their own research.

Modeling, Simulation, Design and Engineering of WDM Systems and Networks provides readers with the basic skills, concepts, and design techniques used to begin design and engineering of optical communication systems and networks at various layers. The latest semi-analytical system simulation techniques are applied to optical WDM systems and networks, and a review of the various current areas of optical communications is presented. Simulation is mixed with experimental verification and engineering to present the industry as well as state-of-the-art research. This contributed volume is divided into three parts, accommodating different readers interested in various types of networks and applications. The first part of the book presents modeling approaches and simulation tools mainly for the physical layer including transmission effects, devices, subsystems, and systems), whereas the second part features more engineering/design issues for various types of optical systems including ULH, access, and in-building systems. The third part of the book covers networking issues related to the design of provisioning and survivability algorithms for impairment-aware and multi-domain networks. Intended for professional scientists, company engineers, and university researchers, the text demonstrates the effectiveness of computer-aided design when it comes to network engineering and prototyping.