Melting and Casting Review

Melting and Casting Review
Author :
Publisher :
Total Pages : 18
Release :
ISBN-10 : UOM:39015095156264
ISBN-13 :
Rating : 4/5 (64 Downloads)

Synopsis Melting and Casting Review by :

This memorandum reviews nineteen papers dealing with melting and casting technology of particular interest to DMIC users. The papers were given at the International Metallurgy Conference on June 12-16, 1967 at New York City. These papers were broadly concerned with progress in vacuum-metallurgy technology internationally, materials in vacuum environment, vacuum-metallurgical processes, and vacuum equipment and instrumentation. (Author).

The Oxidation and Contamination of Titanium and Its Alloys

The Oxidation and Contamination of Titanium and Its Alloys
Author :
Publisher :
Total Pages : 22
Release :
ISBN-10 : UOM:39015095155894
ISBN-13 :
Rating : 4/5 (94 Downloads)

Synopsis The Oxidation and Contamination of Titanium and Its Alloys by : J. M. Ferguson

Experimental programs concerned with the oxidation of titanium and its alloys are reviewed and results compared with those predicted by theory. Wagner-Hauffe theory is used as the primary basis for comparison, and its inconsistencies are pointed out. Fifteen binary alloy systems involving titanium are covered, as well as a few ternary and commercial alloys. A short section discusses the effects of oxygen or nitrogen contamination on the mechanical properties of titanium and its alloys. (Author).

Summary of the Thirteenth Meeting of the Refractory Composites Working Group

Summary of the Thirteenth Meeting of the Refractory Composites Working Group
Author :
Publisher :
Total Pages : 30
Release :
ISBN-10 : UOM:39015095156165
ISBN-13 :
Rating : 4/5 (65 Downloads)

Synopsis Summary of the Thirteenth Meeting of the Refractory Composites Working Group by : J. R. Van Orsdel

This memorandum summarizes information on refractory materials and composites that was presented at the Thirteenth Meeting of the Refractory Composites Working Group in Seattle, Washington on July 18-20, 1966. The memorandum is based on 34 papers that were presented at the meeting. They are reviewed and discussed briefly within the framework of the following four broad areas: materials technology, process technology, specific hardware applications and tests, and evaluation techniques. Included in the section on materials technology are discussions dealing with bulk refractory materials, coated systems, and fiber-reinforced composites. The section on process technology discusses cladding and general fabrication processes. The specific hardware applications and tests cover rocket-motor components, and cladding of a probe used in the glass industry. The section on evaluation techniques covers thermal testing, and non-destructive testing. (Author).

Technical Abstract Bulletin

Technical Abstract Bulletin
Author :
Publisher :
Total Pages : 784
Release :
ISBN-10 : UCBK:C108806237
ISBN-13 :
Rating : 4/5 (37 Downloads)

Synopsis Technical Abstract Bulletin by : Defense Documentation Center (U.S.)

Fracture Toughness of High-strength Steels for Military Applications

Fracture Toughness of High-strength Steels for Military Applications
Author :
Publisher :
Total Pages : 22
Release :
ISBN-10 : UOM:39015095156041
ISBN-13 :
Rating : 4/5 (41 Downloads)

Synopsis Fracture Toughness of High-strength Steels for Military Applications by : J. E. Campbell

The Memorandum discusses the current situation on the inclusion of fracture-toughness testing requirements in specifications for high-strength steels used for military applications. The Memorandum was prepared at the request of The Technical Cooperation Program (TTCP), and contains information from Canadian and British members of that program, as well as U.S. information. Military applications discussed include missile motor cases, aircraft landing gear, gun tubes, armor plate, and hydrofoils. (Author).

Index to DMIC Reports and Memoranda

Index to DMIC Reports and Memoranda
Author :
Publisher :
Total Pages : 38
Release :
ISBN-10 : UOM:39015095158161
ISBN-13 :
Rating : 4/5 (61 Downloads)

Synopsis Index to DMIC Reports and Memoranda by : Battelle Memorial Institute. Defense Metals Information Center

Joining of Titanium

Joining of Titanium
Author :
Publisher :
Total Pages : 86
Release :
ISBN-10 : UOM:39015095158336
ISBN-13 :
Rating : 4/5 (36 Downloads)

Synopsis Joining of Titanium by : Robert Edward Monroe

This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).